ALCATEL-IND1-SERVICE-MGR-MIB Table View

A table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined.

alaServiceMgrPortProfileEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1

A Service Manager Port Profile entry.

Indexes

alaServiceMgrPortProfileID

Column	Syntax	OID
alaServiceMgrPortProfileID A label given to uniquely identify this port profile. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.1
alaServiceMgrPortProfileStpBpduTreatment This object describes the behavior of the bridge in regards to the spanning tree protocol BPDU received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the …	ALCATEL-IND1-E-SERVICE-MIBAlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.2
alaServiceMgrPortProfile8021xTreatment This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU o…	ALCATEL-IND1-E-SERVICE-MIBAlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.3
alaServiceMgrPortProfile8021ABTreatment This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU …	ALCATEL-IND1-E-SERVICE-MIBAlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.4
alaServiceMgrPortProfile8023adTreatment This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU …	ALCATEL-IND1-E-SERVICE-MIBAlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.5
alaServiceMgrPortProfileGvrpTreatment This object describes the behavior of the bridge in regards to the GVRP PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the p…	ALCATEL-IND1-E-SERVICE-MIBAlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.6
alaServiceMgrPortProfileAmapTreatment This object describes the behavior of the bridge in regards to the Alcatel propietary AMAP PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) caus…	ALCATEL-IND1-E-SERVICE-MIBAlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.7
alaServiceMgrPortProfileRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.8
alaServiceMgrPortProfileMvrpTreatment This object describes the behavior of the bridge in regards to the MVRP PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the p…	ALCATEL-IND1-E-SERVICE-MIBAlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.1.1.9

The port table has an entry for each port.

alaServiceMgrPortEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.2.1

A Service Manager Port entry.

Indexes

alaServiceMgrPortID

Column	Syntax	OID
alaServiceMgrPortID IfIndex uniquely identify this port table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.2.1.1
alaServiceMgrPortMode The alaServiceMgrPortMode variable indicates if the interface on this port is configured as a service access port or a network access port. If port mode equals 'access', alaServiceMgrPortEncapType must al…	Enumerationr/w Enumerated Values: 0 undefined 1 access 2 network	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.2.1.2
alaServiceMgrPortEncapType The type of encapsulation protocol configured on this port's network interface. If alaServiceMgrPortEncapType has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one servi…	Enumerationr/w Enumerated Values: 0 unknown 1 nullEncap 2 qEncap	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.2.1.3
alaServiceMgrPortPortProfileID This labels which Port Profile this port matched to.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.2.1.4
alaServiceMgrPortRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.2.1.5

A table that contains SAP information.

alaSapExtraInfoEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.3.1

Information about a specific SAP.

Indexes

svcId sapPortId sapEncapValue

Column	Syntax	OID
alaSapInfoTrusted Indicates whether the SAP is trusted.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.3.1.1
alaSapInfoPriority Priority for this SAP.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.1.3.1.2

The Service table contains the information on which IPv4 multicast
switching and routing is configured.

alaIgmpServiceEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1

An entry corresponds to a service on which IPv4 multicast switching
and routing is configured.

Indexes

svcId

Column	Syntax	OID
alaIgmpServiceStatus Administratively enable IPv4 multicast switching and routing on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.1
alaIgmpServiceQuerying Administratively enable IGMP Querying on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.2
alaIgmpServiceSpoofing Administratively enable IGMP Spoofing on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.3
alaIgmpServiceZapping Administratively enable IGMP Zapping on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.4
alaIgmpServiceVersion Set the default IGMP protocol Version running on the Service.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.5
alaIgmpServiceRobustness Set the IGMP Robustness variable used on the Service.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.6
alaIgmpServiceQueryInterval Set the IGMP Query Interval used on the Service.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.7
alaIgmpServiceQueryResponseInterval Set the IGMP Query Response Interval on the Service.	tenths of secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.8
alaIgmpServiceLastMemberQueryInterval Set the IGMP Last Member Query Interval on the Service.	tenths of secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.9
alaIgmpServiceRouterTimeout Set the IGMP Router Timeout on the Service.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.10
alaIgmpServiceSourceTimeout Set the IGMP Source Timeout on the Service.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.11
alaIgmpServiceProxying Administratively enable IGMP Proxying on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.12
alaIgmpServiceUnsolicitedReportInterval Set the IGMP Unsolicited Report Interval on the Service.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.13
alaIgmpServiceQuerierForwarding Administratively enable IGMP Querier Forwarding on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.14
alaIgmpServiceMaxGroupLimit The maximum number of IGMP Group memberships that can be learnt on the Service.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.15
alaIgmpServiceMaxGroupExceedAction The action to be taken when the IGMP group membership limit is exceeded on the Service.	Enumerationr/w Enumerated Values: 0 none 1 drop 2 replace	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.1.1.16

The table listing the IGMP group membership information for SAPs.

alaIgmpMemberServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.2.1

An entry corresponding to an IGMP group membership request.

Indexes

svcId sapPortId sapEncapValue alaIgmpMemberServiceSapGroupAddressType alaIgmpMemberServiceSapGroupAddress alaIgmpMemberServiceSapSourceAddressType alaIgmpMemberServiceSapSourceAddress

Column	Syntax	OID
alaIgmpMemberServiceSapGroupAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.2.1.1
alaIgmpMemberServiceSapGroupAddress The group membership request's IPv4 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.2.1.2
alaIgmpMemberServiceSapSourceAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.2.1.3
alaIgmpMemberServiceSapSourceAddress The group membership request's IPv4 source address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.2.1.4
alaIgmpMemberServiceSapMode The group membership request's IGMP source filter mode.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.2.1.5
alaIgmpMemberServiceSapCount The group membership request's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.2.1.6
alaIgmpMemberServiceSapTimeout The group membership request's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.2.1.7

The table listing the IGMP group membership information for SDP bindings.

alaIgmpMemberServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.3.1

An entry corresponding to an IGMP group membership request.

Indexes

svcId sdpBindId alaIgmpMemberServiceSdpBindGroupAddressType alaIgmpMemberServiceSdpBindGroupAddress alaIgmpMemberServiceSdpBindSourceAddressType alaIgmpMemberServiceSdpBindSourceAddress

Column	Syntax	OID
alaIgmpMemberServiceSdpBindGroupAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.3.1.1
alaIgmpMemberServiceSdpBindGroupAddress The group membership request's IPv4 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.3.1.2
alaIgmpMemberServiceSdpBindSourceAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.3.1.3
alaIgmpMemberServiceSdpBindSourceAddress The group membership request's IPv4 source address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.3.1.4
alaIgmpMemberServiceSdpBindMode The group membership request's IGMP source filter mode.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.3.1.5
alaIgmpMemberServiceSdpBindCount The group membership request's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.3.1.6
alaIgmpMemberServiceSdpBindTimeout The group membership request's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.3.1.7

The table listing the service sap static IGMP group membership information.

alaIgmpStaticMemberServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.4.1

An entry corresponding to a ervice sap static IGMP group membership request.

Indexes

svcId sapPortId sapEncapValue alaIgmpStaticMemberServiceSapGroupAddressType alaIgmpStaticMemberServiceSapGroupAddress

Column	Syntax	OID
alaIgmpStaticMemberServiceSapGroupAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.4.1.1
alaIgmpStaticMemberServiceSapGroupAddress The service sap static group membership request's IPv4 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.4.1.2
alaIgmpStaticMemberServiceSapRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.4.1.3

The table listing the service sdp binding static IGMP group membership information.

alaIgmpStaticMemberServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.5.1

An entry corresponding to a service sdp binding static IGMP group membership request.

Indexes

svcId sdpBindId alaIgmpStaticMemberServiceSdpBindGroupAddressType alaIgmpStaticMemberServiceSdpBindGroupAddress

Column	Syntax	OID
alaIgmpStaticMemberServiceSdpBindGroupAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.5.1.1
alaIgmpStaticMemberServiceSdpBindGroupAddress The service sdp binding static group membership request's IPv4 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.5.1.2
alaIgmpStaticMemberServiceSdpBindRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.5.1.3

The table listing the service sap neighboring IP multicast routers.

alaIgmpNeighborServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.6.1

An entry corresponding to an IP multicast router.

Indexes

svcId sapPortId sapEncapValue alaIgmpNeighborServiceSapHostAddressType alaIgmpNeighborServiceSapHostAddress

Column	Syntax	OID
alaIgmpNeighborServiceSapHostAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.6.1.1
alaIgmpNeighborServiceSapHostAddress The IP multicast router's IPv4 host address.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.6.1.2
alaIgmpNeighborServiceSapCount The IP multicast router's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.6.1.3
alaIgmpNeighborServiceSapTimeout The IP multicast router's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.6.1.4

The table listing the service SdpBind neighboring IP multicast routers.

alaIgmpNeighborServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.7.1

An entry corresponding to an IP multicast router.

Indexes

svcId sdpBindId alaIgmpNeighborServiceSdpBindHostAddressType alaIgmpNeighborServiceSdpBindHostAddress

Column	Syntax	OID
alaIgmpNeighborServiceSdpBindHostAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.7.1.1
alaIgmpNeighborServiceSdpBindHostAddress The IP multicast router's IPv4 host address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.7.1.2
alaIgmpNeighborServiceSdpBindCount The IP multicast router's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.7.1.3
alaIgmpNeighborServiceSdpBindTimeout The IP multicast router's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.7.1.4

The table listing the service sap static IP multicast routers.

alaIgmpStaticNeighborServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.8.1

An entry corresponding to a service sap static IP multicast router.

Indexes

svcId sapPortId sapEncapValue

Column	Syntax	OID
alaIgmpStaticNeighborServiceSapRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.8.1.1

The table listing the service SdpBind static IP multicast routers.

alaIgmpStaticNeighborServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.9.1

An entry corresponding to a service SdpBind static IP multicast router.

Indexes

svcId sdpBindId

Column	Syntax	OID
alaIgmpStaticNeighborServiceSdpBindRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.9.1.1

The table listing the service sap neighboring IGMP queriers.

alaIgmpQuerierServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.10.1

An entry corresponding to an IGMP querier.

Indexes

svcId sapPortId sapEncapValue alaIgmpQuerierServiceSapHostAddressType alaIgmpQuerierServiceSapHostAddress

Column	Syntax	OID
alaIgmpQuerierServiceSapHostAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.10.1.1
alaIgmpQuerierServiceSapHostAddress The IGMP querier's IPv4 host address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.10.1.2
alaIgmpQuerierServiceSapCount The IGMP querier's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.10.1.3
alaIgmpQuerierServiceSapTimeout The IGMP querier's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.10.1.4

The table listing the service SdpBind neighboring IGMP queriers.

alaIgmpQuerierServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.11.1

An entry corresponding to an IGMP querier.

Indexes

svcId sdpBindId alaIgmpQuerierServiceSdpBindHostAddressType alaIgmpQuerierServiceSdpBindHostAddress

Column	Syntax	OID
alaIgmpQuerierServiceSdpBindHostAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.11.1.1
alaIgmpQuerierServiceSdpBindHostAddress The IGMP querier's IPv4 host address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.11.1.2
alaIgmpQuerierServiceSdpBindCount The IGMP querier's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.11.1.3
alaIgmpQuerierServiceSdpBindTimeout The IGMP querier's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.11.1.4

The table listing the service sap static IGMP queriers.

alaIgmpStaticQuerierServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.12.1

An entry corresponding to a static IGMP querier.

Indexes

svcId sapPortId sapEncapValue

Column	Syntax	OID
alaIgmpStaticQuerierServiceSapRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.12.1.1

The table listing the service SdpBind static IGMP queriers.

alaIgmpStaticQuerierServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.13.1

An entry corresponding to a static IGMP querier.

Indexes

svcId sdpBindId

Column	Syntax	OID
alaIgmpStaticQuerierServiceSdpBindRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.13.1.1

The table listing the Service IP multicast source information.

alaIgmpServiceSourceEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1

An entry corresponding to an IP multicast source flow.

Indexes

svcId alaIgmpServiceSourceGroupAddressType alaIgmpServiceSourceGroupAddress alaIgmpServiceSourceHostAddressType alaIgmpServiceSourceHostAddress alaIgmpServiceSourceDestAddressType alaIgmpServiceSourceDestAddress alaIgmpServiceSourceOrigAddressType alaIgmpServiceSourceOrigAddress

Column	Syntax	OID
alaIgmpServiceSourceGroupAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.1
alaIgmpServiceSourceGroupAddress The IP multicast source flow's IPv4 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.2
alaIgmpServiceSourceHostAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.3
alaIgmpServiceSourceHostAddress The IP multicast source flow's IPv4 host address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.4
alaIgmpServiceSourceDestAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.5
alaIgmpServiceSourceDestAddress The IP multicast source flow's IPv4 tunnel destination address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.6
alaIgmpServiceSourceOrigAddressType The IP address type. This release only supports IPv4.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.7
alaIgmpServiceSourceOrigAddress The IP multicast source flow's IPv4 tunnel source address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.8
alaIgmpServiceSourceLocale The value of the object alaIgmpServiceSourceLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP…	AluLocation Type Values: 1 sap 2 sdp	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.9
alaIgmpServiceSourcePortId The value of the object alaIgmpServiceSourcePortId indicates, together with the object alaIgmpServiceSourceEncapValue, the SAP on which this multicast router is detected. The value of this object is only …		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.10
alaIgmpServiceSourceEncapValue The value of the object alaIgmpServiceSourceEncapValue indicates, together with the objectalaIgmpServiceSourcePortId, the SAP on which this multicast router is detected. The value of this object is only m…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.11
alaIgmpServiceSourceSdpId The value of the object alaIgmpServiceSourceSdpId indicates, together with the object alaIgmpServiceSourceVcId, the SDP Bind on which this multicast router is detected. The value of this object is only me…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.12
alaIgmpServiceSourceVcId The value of the object alaIgmpServiceSourceVcId indicates, together with the object alaIgmpServiceSourceSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only me…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.13
alaIgmpServiceSourceType The IP multicast source flow's encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.14.1.14

The table listing the IP multicast forward information.

alaIgmpServiceSapForwardEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1

An entry corresponding to an IP multicast forwarded flow.

Indexes

svcId alaIgmpServiceSapForwardGroupAddress alaIgmpServiceSapForwardHostAddress alaIgmpServiceSapForwardDestAddress alaIgmpServiceSapForwardOrigAddress alaIgmpServiceSapForwardNextSapPortId alaIgmpServiceSapForwardNextSapEncapValue

Column	Syntax	OID
alaIgmpServiceSapForwardLocale The value of the object alaIgmpServiceSapForwardLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an…	AluLocation Type Values: 1 sap 2 sdp	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.1
alaIgmpServiceSapForwardPortId The value of the object alaIgmpServiceSapForwardPortId indicates, together with the object alaIgmpServiceSapForwardEncapValue, the SAP on which this multicast router is detected. The value of this object …		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.2
alaIgmpServiceSapForwardEncapValue The value of the object alaIgmpServiceSapForwardEncapValue indicates, together with the objectalaIgmpServiceSapForwardPortId, the SAP on which this multicast router is detected. The value of this object i…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.3
alaIgmpServiceSapForwardSdpId The value of the object alaIgmpServiceSapForwardSdpId indicates, together with the object alaIgmpServiceSapForwardVcId, the SDP Bind on which this multicast router is detected. The value of this object is…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.4
alaIgmpServiceSapForwardVcId The value of the object alaIgmpServiceSapForwardVcId indicates, together with the object alaIgmpServiceSapForwardSdpId, the SDP Bind on which this multicast router is detected. The value of this object is…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.5
alaIgmpServiceSapForwardGroupAddress The IP multicast forwarded flow's IPv4 group address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.6
alaIgmpServiceSapForwardHostAddress The IP multicast forwarded flow's IPv4 host address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.7
alaIgmpServiceSapForwardDestAddress The IP multicast forwarded flow's IPv4 tunnel destination address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.8
alaIgmpServiceSapForwardOrigAddress The IP multicast forwarded flow's IPv4 tunnel source address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.9
alaIgmpServiceSapForwardType The IP multicast forwarded flow's encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.10
alaIgmpServiceSapForwardNextSapPortId The IP multicast forwarded flow's next SAP. The ID of the access port where this SAP is defined.		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.11
alaIgmpServiceSapForwardNextSapEncapValue The IP multicast forwarded flow's next SAP. The value of the label used to identify this SAP on the access port specified by sapPortId.		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.12
alaIgmpServiceSapForwardNextType The IP multicast forwarded flow's next encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.15.1.13

The table listing the IP multicast forward information.

alaIgmpServiceSdpBindForwardEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1

An entry corresponding to an IP multicast forwarded flow.

Indexes

svcId alaIgmpServiceSdpBindForwardGroupAddress alaIgmpServiceSdpBindForwardHostAddress alaIgmpServiceSdpBindForwardDestAddress alaIgmpServiceSdpBindForwardOrigAddress alaIgmpServiceSdpBindForwardNextSdpBindId

Column	Syntax	OID
alaIgmpServiceSdpBindForwardLocale The value of the object alaIgmpServiceSdpBindForwardLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected o…	AluLocation Type Values: 1 sap 2 sdp	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.1
alaIgmpServiceSdpBindForwardPortId The value of the object alaIgmpServiceSdpBindForwardPortId indicates, together with the object alaIgmpServiceSdpBindForwardEncapValue, the SdpBind on which this multicast router is detected. The value of …		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.2
alaIgmpServiceSdpBindForwardEncapValue The value of the object alaIgmpServiceSdpBindForwardEncapValue indicates, together with the object alaIgmpServiceSdpBindForwardPortId, the SAP on which this multicast router is detected. The value of this…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.3
alaIgmpServiceSdpBindForwardSdpId The value of the object alaIgmpServiceSdpBindForwardSdpId indicates, together with the object alaIgmpServiceSdpBindForwardVcId, the SDP Bind on which this multicast router is detected. The value of this o…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.4
alaIgmpServiceSdpBindForwardVcId The value of the object alaIgmpServiceSdpBindForwardVcId indicates, together with the object alaIgmpServiceSdpBindForwardSdpId, the SDP Bind on which this multicast router is detected. The value of this o…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.5
alaIgmpServiceSdpBindForwardGroupAddress The IP multicast forwarded flow's IPv4 group address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.6
alaIgmpServiceSdpBindForwardHostAddress The IP multicast forwarded flow's IPv4 host address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.7
alaIgmpServiceSdpBindForwardDestAddress The IP multicast forwarded flow's IPv4 tunnel destination address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.8
alaIgmpServiceSdpBindForwardOrigAddress The IP multicast forwarded flow's IPv4 tunnel source address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.9
alaIgmpServiceSdpBindForwardType The IP multicast forwarded flow's encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.10
alaIgmpServiceSdpBindForwardNextSdpBindId The IP multicast forwarded flow's next sdpBind.		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.11
alaIgmpServiceSdpBindForwardNextType The IP multicast forwarded flow's next encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.16.1.12

The table listing the IP multicast port information.

alaIgmpServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.17.1

An entry corresponding to IP multicast Service SAP information.

Indexes

svcId sapPortId sapEncapValue

Column	Syntax	OID
alaIgmpServiceSapMaxGroupLimit The maximum number of IGMP Group memberships that can be learnt on the sap.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.17.1.1
alaIgmpServiceSapMaxGroupExceedAction The action to be taken when IGMP group membership limit is exceeded for the sap.	Enumerationr/w Enumerated Values: 0 none 1 drop 2 replace	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.17.1.2
alaIgmpServiceSapCurrentGroupCount The current IP multicast group memberships on a sap. instance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.17.1.3

The table listing the IP multicast port information.

alaIgmpServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.18.1

An entry corresponding to IP multicast Service SdpBind information.

Indexes

svcId sdpBindId

Column	Syntax	OID
alaIgmpServiceSdpBindMaxGroupLimit The maximum number of IGMP Group memberships that can be learnt on the SdpBind.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.18.1.1
alaIgmpServiceSdpBindMaxGroupExceedAction The action to be taken when IGMP group membership limit is exceeded for the SdpBind.	Enumerationr/w Enumerated Values: 0 none 1 drop 2 replace	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.18.1.2
alaIgmpServiceSdpBindCurrentGroupCount The current IP multicast group memberships on a SdpBind. instance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.2.18.1.3

The Service table contains the information on which IPv6 multicast
switching and routing is configured.

alaMldServiceEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1

An entry corresponds to a service on which IPv6 multicast switching
and routing is configured.

Indexes

svcId

Column	Syntax	OID
alaMldServiceStatus Administratively enable IPv6 multicast switching and routing on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.1
alaMldServiceQuerying Administratively enable MLD Querying on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.2
alaMldServiceSpoofing Administratively enable MLD Spoofing on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.3
alaMldServiceZapping Administratively enable MLD Zapping on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.4
alaMldServiceVersion Set the default MLD protocol Version running on the Service.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.5
alaMldServiceRobustness Set the MLD Robustness variable used on the Service.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.6
alaMldServiceQueryInterval Set the MLD Query Interval used on the Service.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.7
alaMldServiceQueryResponseInterval Set the MLD Query Response Interval on the Service.	tenths of secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.8
alaMldServiceLastMemberQueryInterval Set the MLD Last Member Query Interval on the Service.	tenths of secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.9
alaMldServiceRouterTimeout Set the MLD Router Timeout on the Service.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.10
alaMldServiceSourceTimeout Set the MLD Source Timeout on the Service.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.11
alaMldServiceProxying Administratively enable MLD Proxying on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.12
alaMldServiceUnsolicitedReportInterval Set the MLD Unsolicited Report Interval on the Service.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.13
alaMldServiceQuerierForwarding Administratively enable MLD Querier Forwarding on the Service.	Enumerationr/w Enumerated Values: 0 none 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.14
alaMldServiceMaxGroupLimit The maximum number of MLD Group memberships that can be learnt on the Service.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.15
alaMldServiceMaxGroupExceedAction The action to be taken when the MLD group membership limit is exceeded on the Service.	Enumerationr/w Enumerated Values: 0 none 1 drop 2 replace	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.1.1.16

The table listing the MLD group membership information for SAPs.

alaMldMemberServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.2.1

An entry corresponding to an MLD group membership request.

Indexes

svcId sapPortId sapEncapValue alaMldMemberServiceSapGroupAddressType alaMldMemberServiceSapGroupAddress alaMldMemberServiceSapSourceAddressType alaMldMemberServiceSapSourceAddress

Column	Syntax	OID
alaMldMemberServiceSapGroupAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.2.1.1
alaMldMemberServiceSapGroupAddress The group membership request's IPv6 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.2.1.2
alaMldMemberServiceSapSourceAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.2.1.3
alaMldMemberServiceSapSourceAddress The group membership request's IPv6 source address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.2.1.4
alaMldMemberServiceSapMode The group membership request's MLD source filter mode.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.2.1.5
alaMldMemberServiceSapCount The group membership request's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.2.1.6
alaMldMemberServiceSapTimeout The group membership request's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.2.1.7

The table listing the MLD group membership information for SDP bindings.

alaMldMemberServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.3.1

An entry corresponding to an MLD group membership request.

Indexes

svcId sdpBindId alaMldMemberServiceSdpBindGroupAddressType alaMldMemberServiceSdpBindGroupAddress alaMldMemberServiceSdpBindSourceAddressType alaMldMemberServiceSdpBindSourceAddress

Column	Syntax	OID
alaMldMemberServiceSdpBindGroupAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.3.1.1
alaMldMemberServiceSdpBindGroupAddress The group membership request's IPv6 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.3.1.2
alaMldMemberServiceSdpBindSourceAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.3.1.3
alaMldMemberServiceSdpBindSourceAddress The group membership request's IPv6 source address.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.3.1.4
alaMldMemberServiceSdpBindMode The group membership request's MLD source filter mode.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.3.1.5
alaMldMemberServiceSdpBindCount The group membership request's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.3.1.6
alaMldMemberServiceSdpBindTimeout The group membership request's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.3.1.7

The table listing the service sap static MLD group membership information.

alaMldStaticMemberServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.4.1

An entry corresponding to a ervice sap static MLD group membership request.

Indexes

svcId sapPortId sapEncapValue alaMldStaticMemberServiceSapGroupAddressType alaMldStaticMemberServiceSapGroupAddress

Column	Syntax	OID
alaMldStaticMemberServiceSapGroupAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.4.1.1
alaMldStaticMemberServiceSapGroupAddress The service sap static group membership request's IPv6 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.4.1.2
alaMldStaticMemberServiceSapRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.4.1.3

The table listing the service sdp binding static MLD group membership information.

alaMldStaticMemberServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.5.1

An entry corresponding to a service sdp binding static MLD group membership request.

Indexes

svcId sdpBindId alaMldStaticMemberServiceSapGroupAddressType alaMldStaticMemberServiceSapGroupAddress

Column	Syntax	OID
alaMldStaticMemberServiceSdpBindGroupAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.5.1.1
alaMldStaticMemberServiceSdpBindGroupAddress The service sdp binding static group membership request's IPv6 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.5.1.2
alaMldStaticMemberServiceSdpBindRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.5.1.3

The table listing the service sap neighboring IP multicast routers.

alaMldNeighborServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.6.1

An entry corresponding to an IP multicast router.

Indexes

svcId sapPortId sapEncapValue alaMldNeighborServiceSapHostAddressType alaMldNeighborServiceSapHostAddress

Column	Syntax	OID
alaMldNeighborServiceSapHostAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.6.1.1
alaMldNeighborServiceSapHostAddress The IP multicast router's IPv6 host address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.6.1.2
alaMldNeighborServiceSapCount The IP multicast router's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.6.1.3
alaMldNeighborServiceSapTimeout The IP multicast router's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.6.1.4

The table listing the service SdpBind neighboring IP multicast routers.

alaMldNeighborServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.7.1

An entry corresponding to an IP multicast router.

Indexes

svcId sdpBindId alaMldNeighborServiceSdpBindHostAddressType alaMldNeighborServiceSdpBindHostAddress

Column	Syntax	OID
alaMldNeighborServiceSdpBindHostAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.7.1.1
alaMldNeighborServiceSdpBindHostAddress The IP multicast router's IPv6 host address.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.7.1.2
alaMldNeighborServiceSdpBindCount The IP multicast router's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.7.1.3
alaMldNeighborServiceSdpBindTimeout The IP multicast router's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.7.1.4

The table listing the service sap static IP multicast routers.

alaMldStaticNeighborServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.8.1

An entry corresponding to a service sap static IP multicast router.

Indexes

svcId sapPortId sapEncapValue

Column	Syntax	OID
alaMldStaticNeighborServiceSapRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.8.1.1

The table listing the service SdpBind static IP multicast routers.

alaMldStaticNeighborServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.9.1

An entry corresponding to a service SdpBind static IP multicast router.

Indexes

svcId sdpBindId

Column	Syntax	OID
alaMldStaticNeighborServiceSdpBindRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.9.1.1

The table listing the service sap neighboring MLD queriers.

alaMldQuerierServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.10.1

An entry corresponding to an MLD querier.

Indexes

svcId sapPortId sapEncapValue alaMldQuerierServiceSapHostAddressType alaMldQuerierServiceSapHostAddress

Column	Syntax	OID
alaMldQuerierServiceSapHostAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.10.1.1
alaMldQuerierServiceSapHostAddress The MLD querier's IPv6 host address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.10.1.2
alaMldQuerierServiceSapCount The MLD querier's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.10.1.3
alaMldQuerierServiceSapTimeout The MLD querier's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.10.1.4

The table listing the service SdpBind neighboring MLD queriers.

alaMldQuerierServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.11.1

An entry corresponding to an MLD querier.

Indexes

svcId sdpBindId alaMldQuerierServiceSdpBindHostAddressType alaMldQuerierServiceSdpBindHostAddress

Column	Syntax	OID
alaMldQuerierServiceSdpBindHostAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.11.1.1
alaMldQuerierServiceSdpBindHostAddress The MLD querier's IPv6 host address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.11.1.2
alaMldQuerierServiceSdpBindCount The MLD querier's counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.11.1.3
alaMldQuerierServiceSdpBindTimeout The MLD querier's timeout.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.11.1.4

The table listing the service sap static MLD queriers.

alaMldStaticQuerierServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.12.1

An entry corresponding to a static MLD querier.

Indexes

svcId sapPortId sapEncapValue

Column	Syntax	OID
alaMldStaticQuerierServiceSapRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.12.1.1

The table listing the service SdpBind static MLD queriers.

alaMldStaticQuerierServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.13.1

An entry corresponding to a static MLD querier.

Indexes

svcId sdpBindId

Column	Syntax	OID
alaMldStaticQuerierServiceSdpBindRowStatus Used in accordance with installation and removal conventions for conceptual rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.13.1.1

The table listing the Service IP multicast source information.

alaMldServiceSourceEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1

An entry corresponding to an IP multicast source flow.

Indexes

svcId alaMldServiceSourceGroupAddressType alaMldServiceSourceGroupAddress alaMldServiceSourceHostAddressType alaMldServiceSourceHostAddress alaMldServiceSourceDestAddressType alaMldServiceSourceDestAddress alaMldServiceSourceOrigAddressType alaMldServiceSourceOrigAddress

Column	Syntax	OID
alaMldServiceSourceGroupAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.1
alaMldServiceSourceGroupAddress The IP multicast source flow's IPv6 group address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.2
alaMldServiceSourceHostAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.3
alaMldServiceSourceHostAddress The IP multicast source flow's IPv6 host address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.4
alaMldServiceSourceDestAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.5
alaMldServiceSourceDestAddress The IP multicast source flow's IPv6 tunnel destination address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.6
alaMldServiceSourceOrigAddressType The IP address type. This release only supports IPv6.	Integer32 Constraints: range: 2-2	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.7
alaMldServiceSourceOrigAddress The IP multicast source flow's IPv6 tunnel source address.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.8
alaMldServiceSourceLocale The value of the object alaMldServiceSourceLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an SDP …	AluLocation Type Values: 1 sap 2 sdp	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.9
alaMldServiceSourcePortId The value of the object alaMldServiceSourcePortId indicates, together with the object alaMldServiceSourceEncapValue, the SAP on which this multicast router is detected. The value of this object is only me…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.10
alaMldServiceSourceEncapValue The value of the object alaMldServiceSourceEncapValue indicates, together with the objectalaMldServiceSourcePortId, the SAP on which this multicast router is detected. The value of this object is only mea…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.11
alaMldServiceSourceSdpId The value of the object alaMldServiceSourceSdpId indicates, together with the object alaMldServiceSourceVcId, the SDP Bind on which this multicast router is detected. The value of this object is only mean…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.12
alaMldServiceSourceVcId The value of the object alaMldServiceSourceVcId indicates, together with the object alaMldServiceSourceSdpId, the SDP Bind on which this multicast router is detected. The value of this object is only mean…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.13
alaMldServiceSourceType The IP multicast source flow's encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.14.1.14

The table listing the IP multicast forward information.

alaMldServiceSapForwardEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1

An entry corresponding to an IP multicast forwarded flow.

Indexes

svcId alaMldServiceSapForwardGroupAddress alaMldServiceSapForwardHostAddress alaMldServiceSapForwardDestAddress alaMldServiceSapForwardOrigAddress alaMldServiceSapForwardNextSapPortId alaMldServiceSapForwardNextSapEncapValue

Column	Syntax	OID
alaMldServiceSapForwardLocale The value of the object alaMldServiceSapForwardLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on an …	AluLocation Type Values: 1 sap 2 sdp	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.1
alaMldServiceSapForwardPortId The value of the object alaMldServiceSapForwardPortId indicates, together with the object alaMldServiceSapForwardEncapValue, the SAP on which this multicast router is detected. The value of this object is…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.2
alaMldServiceSapForwardEncapValue The value of the object alaMldServiceSapForwardEncapValue indicates, together with the objectalaMldServiceSapForwardPortId, the SAP on which this multicast router is detected. The value of this object is …		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.3
alaMldServiceSapForwardSdpId The value of the object alaMldServiceSapForwardSdpId indicates, together with the object alaMldServiceSapForwardVcId, the SDP Bind on which this multicast router is detected. The value of this object is o…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.4
alaMldServiceSapForwardVcId The value of the object alaMldServiceSapForwardVcId indicates, together with the object alaMldServiceSapForwardSdpId, the SDP Bind on which this multicast router is detected. The value of this object is o…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.5
alaMldServiceSapForwardGroupAddress The IP multicast forwarded flow's IPv6 group address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.6
alaMldServiceSapForwardHostAddress The IP multicast forwarded flow's IPv6 host address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.7
alaMldServiceSapForwardDestAddress The IP multicast forwarded flow's IPv6 tunnel destination address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.8
alaMldServiceSapForwardOrigAddress The IP multicast forwarded flow's IPv6 tunnel source address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.9
alaMldServiceSapForwardType The IP multicast forwarded flow's encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.10
alaMldServiceSapForwardNextSapPortId The IP multicast forwarded flow's next SAP. The ID of the access port where this SAP is defined.		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.11
alaMldServiceSapForwardNextSapEncapValue The IP multicast forwarded flow's next SAP. The value of the label used to identify this SAP on the access port specified by sapPortId.		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.12
alaMldServiceSapForwardNextType The IP multicast forwarded flow's next encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.15.1.13

The table listing the IP multicast forward information.

alaMldServiceSdpBindForwardEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1

An entry corresponding to an IP multicast forwarded flow.

Indexes

svcId alaMldServiceSdpBindForwardGroupAddress alaMldServiceSdpBindForwardHostAddress alaMldServiceSdpBindForwardDestAddress alaMldServiceSdpBindForwardOrigAddress alaMldServiceSdpBindForwardNextSdpBindId

Column	Syntax	OID
alaMldServiceSdpBindForwardLocale The value of the object alaMldServiceSdpBindForwardLocale indicates where this multicast router was detected. A multicast router found on a local SAP has the value 'sap(1)'. A multicast router detected on…	AluLocation Type Values: 1 sap 2 sdp	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.1
alaMldServiceSdpBindForwardPortId The value of the object alaMldServiceSdpBindForwardPortId indicates, together with the object alaMldServiceSdpBindForwardEncapValue, the SdpBind on which this multicast router is detected. The value of th…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.2
alaMldServiceSdpBindForwardEncapValue The value of the object alaMldServiceSdpBindForwardEncapValue indicates, together with the object alaMldServiceSdpBindForwardPortId, the SAP on which this multicast router is detected. The value of this o…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.3
alaMldServiceSdpBindForwardSdpId The value of the object alaMldServiceSdpBindForwardSdpId indicates, together with the object alaMldServiceSdpBindForwardVcId, the SDP Bind on which this multicast router is detected. The value of this obj…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.4
alaMldServiceSdpBindForwardVcId The value of the object alaMldServiceSdpBindForwardVcId indicates, together with the object alaMldServiceSdpBindForwardSdpId, the SDP Bind on which this multicast router is detected. The value of this obj…		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.5
alaMldServiceSdpBindForwardGroupAddress The IP multicast forwarded flow's IPv6 group address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.6
alaMldServiceSdpBindForwardHostAddress The IP multicast forwarded flow's IPv6 host address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.7
alaMldServiceSdpBindForwardDestAddress The IP multicast forwarded flow's IPv6 tunnel destination address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.8
alaMldServiceSdpBindForwardOrigAddress The IP multicast forwarded flow's IPv6 tunnel source address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.9
alaMldServiceSdpBindForwardType The IP multicast forwarded flow's encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.10
alaMldServiceSdpBindForwardNextSdpBindId The IP multicast forwarded flow's next sdpBind.		.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.11
alaMldServiceSdpBindForwardNextType The IP multicast forwarded flow's next encapsulation type.	Enumeration Enumerated Values: 1 mcast 2 pim 3 ipip	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.16.1.12

The table listing the IP multicast port information.

alaMldServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.17.1

An entry corresponding to IP multicast Service SAP information.

Indexes

svcId sapPortId sapEncapValue

Column	Syntax	OID
alaMldServiceSapMaxGroupLimit The maximum number of MLD Group memberships that can be learnt on the sap.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.17.1.1
alaMldServiceSapMaxGroupExceedAction The action to be taken when MLD group membership limit is exceeded for the sap.	Enumerationr/w Enumerated Values: 0 none 1 drop 2 replace	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.17.1.2
alaMldServiceSapCurrentGroupCount The current IP multicast group memberships on a sap. instance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.17.1.3

The table listing the IP multicast port information.

alaMldServiceSdpBindEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.18.1

An entry corresponding to IP multicast Service SdpBind information.

Indexes

svcId sdpBindId

Column	Syntax	OID
alaMldServiceSdpBindMaxGroupLimit The maximum number of MLD Group memberships that can be learnt on the SdpBind.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.18.1.1
alaMldServiceSdpBindMaxGroupExceedAction The action to be taken when MLD group membership limit is exceeded for the SdpBind.	Enumerationr/w Enumerated Values: 0 none 1 drop 2 replace	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.18.1.2
alaMldServiceSdpBindCurrentGroupCount The current IP multicast group memberships on a SdpBind. instance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.3.18.1.3

alaVRtrExtendedLdpGeneralTable  is an extension to vRtrLdpGeneralTable 	
and it has an entry for each virtual router
in the system capable of supporting an instance of the
Label Distribution Protocol (LDP).

alaVRtrExtendedLdpGeneralEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.1.1

Each row entry represents an instance of the Label Distribution
Protocol (LDP) for a virtual router in the system.

An entry in this table is created by the agent when vRtrLdpStatus
in the vRtrConfTable is s…

Indexes

vRtrID

Column	Syntax	OID
alaVRtrLdpGenGracefulRestartSupport The value of alaVRtrLdpGenGracefulRestartSupport specifies whether restarting the LSR gracefully during a control plane restart is allowed. When this object has a value of 'true', graceful restart procedures are…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.1.1.1
alaVRtrLdpGenGRReconnectTime The value of alaVRtrLdpGenGRReconnectTime specifies the value of FT Reconnect timer. The FT Reconnect timeout is the time that the sender of the TLV would like the receiver of that TLV to wait after the receiver detects…	secondsUnsigned32r/w Constraints: range: 5-300	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.1.1.2
alaVRtrLdpGenGRFwdStateHoldTime The value of vRtrLdpGenGRFwdStateHoldTime specifies the MPLS forwarding state hold timer. If the forwarding state has been preserved during a control plane restart, then the LSR starts this timer a…	secondsUnsigned32r/w Constraints: range: 15-1800	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.1.1.3

alaVRtrLdpExtendedSessionTable is an extension to vRtrLdpSessionTable.
This isa read-only table which parallels the
mplsLdpSessionTable in the MPLS-LDP-MIB. The purpose of this
table is to keep information about a single session between
an LDP entity and an LDP Peer

alaVRtrLdpExtendedSessionEntry row .1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.2.1

A row in this table represents information about a single
session between an LDP entity and an LDP Peer.

Indexes

vRtrID alaVRtrLdpPeerLdpId

Column	Syntax	OID
alaVRtrLdpPeerLdpId The value of alaVRtrLdpSessLocalLdpId specifies the local LDP identifier for this LDP session.	MPLS-LDP-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.2.1.1
alaVRtrLdpSessRestartInProgress The value of alaVRtrLdpSessRestartInProgress indicates whether graceful restart is in progress for this session	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.2.1.2
alaVRtrLdpSessFtReconTimeAdvertised The value of alaVRtrLdpSessFtReconTimeAdvertised indicates the session's Fault Tolerant(FT) Reconnect Timeout advertised to the peer	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.2.1.3
alaVRtrLdpSessFtRecoveryTimeAdvertised The value of alaVRtrLdpSessFtRecoveryTimeAdvertised indicates the session's Fault Tolerant(FT) recovery timeout that was advertised to the peer.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.51.1.1.4.2.1.4