This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This group contains the configuration information data
for the Ethernet Switching Module.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE
t notifies management station if an SFP/XFP/SFP+ temperature has crossed any
threshold or reverted from previous threshold violation for a port represented by ifIndex.
It also provides the current realtime value of SFP/XFP/SFP+ temperature.
ddmVoltageThresholdViolated
.1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.2
t notifies management station if an SFP/XFP/SFP+ supply voltage has crossed any
threshold or reverted from previous threshold violation for a port represented by ifIndex.
It also provides the current realtime value of SFP/XFP/SFP+ supply voltage.
ddmCurrentThresholdViolated
.1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.3
t notifies management station if an SFP/XFP/SFP+ Tx bias current has crossed any
threshold or reverted from previous threshold violation for a port represented by ifIndex.
It also provides the current realtime value of SFP/XFP/SFP+ Tx bias current.
ddmTxPowerThresholdViolated
.1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.4
t notifies management station if an SFP/XFP/SFP+ Tx output power has crossed any
threshold or reverted from previous threshold violation for a port represented by ifIndex.
It also provides the current realtime value of SFP/XFP/SFP+ Tx output power.
ddmRxPowerThresholdViolated
.1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.5
t notifies management station if an SFP/XFP/SFP+ Rx optical power has crossed any
threshold or reverted from previous threshold violation for a port represented by ifIndex.
It also provides the current realtime value of SFP/XFP/SFP+ Rx optical power.
esmViolationRecoveryTimeout
.1.3.6.1.4.1.6486.800.1.2.1.5.1.0.2.0.1
This object notifies management station if User-Port ports get re-enabled after esm violation recovery time
alaEsmKite2eDBChange
.1.3.6.1.4.1.6486.800.1.2.1.5.1.0.3
daughter module is inserted in place of CX4 stacking module or vice versa, then
this notification is sent to Management Entity.
Please note that if the old module and new module, defined by EsmDBType, are same, then this trap will not
be sent.
esmPortViolation
.1.3.6.1.4.1.6486.800.1.2.1.5.1.0.4
This object notifies management station whenever an interface is shut down by a feature due to violation.
alaDBChange
.1.3.6.1.4.1.6486.800.1.2.1.5.1.0.5
is a change in the expansion module presence, then this notification is sent to Management Entity.
Please note that if the old module and new module, defined by AlaDBType, are same, then this trap will not
be sent.
esmDrvTrapDropsLink
.1.3.6.1.4.1.6486.800.1.3.2.6.0.1
thernet code drops the link because of
excessive errors, a Trap is sent.
alaDyingGaspTrap
.1.3.6.1.4.1.6486.800.1.3.2.6.0.3
Dying Gasp trap.
esmStormThresholdViolationStatus
.1.3.6.1.4.1.6486.800.1.3.2.6.0.4
t notifies management station if User-Port ports gets the ingress traffic inflow
above the configured value.