ALCATEL-IND1-IPX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
38

alaIpxStaticRouteTable

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1 · 1 row entry · 6 columns
Open in standard view 
The Static Routes table is used and add entries and extract
information from the static routes configured in the system.
alaIpxStaticRouteEntry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1
Each entry corresponds to one static route.
Indexes
alaIpxStaticRouteNetNum
Column Syntax OID
alaIpxStaticRouteNetNum
The IPX network number of the route's destination.
NetNumber
Textual Convention: NetNumber OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.1
alaIpxStaticRouteNextHopNet
The IPX network number of the router used to
reach the first hop in the static route.
NetNumberr/w
Textual Convention: NetNumber OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.2
alaIpxStaticRouteNextHopNode
The IPX node number of the router used to
reach the first hop in the static route.
HostAddressr/w
Textual Convention: HostAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.3
alaIpxStaticRouteTicks
The delay, in ticks, to reach the route's destination.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.4
alaIpxStaticRouteHopCount
The number of hops necessary to reach the destination.
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.5
alaIpxStaticRouteRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxStaticRouteTable is constrained
by the operational state of t…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.6

alaIpxDefRouteTable

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2 · 1 row entry · 4 columns
Open in standard view 
The default route table contains information about
the destinations to which all packets are sent when the
destination network is not known.
alaIpxDefRouteEntry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1
One table entry per switch for default route.
Indexes
alaIpxDefRouteVlanId
Column Syntax OID
alaIpxDefRouteVlanId
The VlanId for this filter. If VlanId equals 0, the filter
is applied globally.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1.1
alaIpxDefRouteNet
The IPX network number of the router used to
reach the first hop in the default route.
NetNumberr/w
Textual Convention: NetNumber OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1.2
alaIpxDefRouteNode
The IPX node number of the router used to
reach the first hop in the default route.
HostAddressr/w
Textual Convention: HostAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1.3
alaIpxDefRouteRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxDefRouteTable is constrained
by the operational state of the …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1.4

alaIpxExtMsgTable

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3 · 1 row entry · 3 columns
Open in standard view 
The extended RIP and SAP messages table contains information
about which vlans use extended RIP and SAP packets.
alaIpxExtMsgEntry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3.1
One table entry per Vlan.
Indexes
alaIpxExtMsgVlanId
Column Syntax OID
alaIpxExtMsgVlanId
The VlanId for this filter. If VlanId equals 0, the filter
is applied globally.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3.1.1
alaIpxExtMsgMode
Indicates whether extended RIP/SAP
packets are sent and received.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3.1.2
alaIpxExtMsgRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxExtMsgTable is constrained
by the operational state of the co…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3.1.3

alaIpxRipSapFilterTable

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1 · 1 row entry · 9 columns
Open in standard view 
The IPX Rip/Sap Filter Table contains information about
all filters that have been defined.
alaIpxRipSapFilterEntry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1
Each entry corresponds to one filter.
Indexes
alaIpxRipSapFilterVlanId alaIpxRipSapFilterType alaIpxRipSapFilterNet alaIpxRipSapFilterNetMask alaIpxRipSapFilterNode alaIpxRipSapFilterNodeMask alaIpxRipSapFilterSvcType
Column Syntax OID
alaIpxRipSapFilterVlanId
The VlanId for this filter. If VlanId equals 0, the filter
is applied globally.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.1
alaIpxRipSapFilterType
The type of filter.
Enumeration
Enumerated Values:
1sapOutput
2sapInput
3gnsOutput
4ripOutput
5ripInput
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.2
alaIpxRipSapFilterNet
The IPX Network Address to filter. A network address
of all 0 's is used to denote All Networks.
NetNumber
Textual Convention: NetNumber OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.3
alaIpxRipSapFilterNetMask
The IPX Network Mask to be used.
NetNumber
Textual Convention: NetNumber OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.4
alaIpxRipSapFilterNode
The IPX node address to filter. A node address
of all 0 's is used to denote All Nodes.
HostAddress
Textual Convention: HostAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.5
alaIpxRipSapFilterNodeMask
The IPX node address mask to be used.
HostAddress
Textual Convention: HostAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.6
alaIpxRipSapFilterSvcType
The SAP service type on which to filter. The SAP
service types are defined by Novell.A value of
ALL(65535) indicates that all services will be filtered.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.7
alaIpxRipSapFilterMode
The action defined by this filter. block (1) means
packets matching this filter will be blocked, and
allow(0) means that packets matching this filter
will be allowed.
Enumerationr/w
Enumerated Values:
1allow
2block
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.8
alaIpxRipSapFilterRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxRipSapFilterTable is constrained
by the operational state of …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.10

alaIpxWatchdogSpoofTable

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2 · 1 row entry · 3 columns
Open in standard view 
The IPX Watchdog Spoofing Table contains information about
all of the current IPX WAN watchdog spoofing entry statuses.
alaIpxWatchdogSpoofEntry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2.1
Each entry corresponds to one WAN routing service.
Indexes
alaIpxWatchdogSpoofVlanId
Column Syntax OID
alaIpxWatchdogSpoofVlanId
The VlanId of the WAN routing service that this entry
applies to. If VlanId equals 0, the filter
is applied globally to all WAN Vlans.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2.1.1
alaIpxWatchdogSpoofMode
This controls whether the IPX Watchdog Spoofing is
enabled or disabled.When enabled, this routing service
will spoof IPX Watchdog packets.When disabled,
this routing service will not spoof IPX Watchdog packets.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2.1.2
alaIpxWatchdogSpoofRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxWatchdogSpoofTable is constrained
by the operational state of…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2.1.3

alaIpxSerialFilterTable

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3 · 1 row entry · 3 columns
Open in standard view 
The IPX Serialization Filtering Table contains information about
all of the current IPX WAN serialization filtering entry statuses.
alaIpxSerialFilterEntry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3.1
Each entry corresponds to one WAN routing service.
Indexes
alaIpxSerialFilterVlanId
Column Syntax OID
alaIpxSerialFilterVlanId
The VlanId of the WAN routing service that this entry
applies to. If VlanId equals 0, the filter
is applied globally to all WAN Vlans.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3.1.1
alaIpxSerialFilterMode
This controls whether the IPX Serialization Filtering is
enabled or disabled.When enabled, this routing service
will filter IPX Serialization packets.When disabled,
this routing service will not filter IPX Serialization…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3.1.2
alaIpxSerialFilterRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxSerialFilterTable is constrained
by the operational state of …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3.1.3

alaSpxKeepaliveSpoofTable

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4 · 1 row entry · 3 columns
Open in standard view 
The SPX Keepalive Spoofing Table contains information about
all of the current IPX WAN SPX spoofing filtering entry statuses.
alaSpxKeepaliveSpoofEntry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4.1
Each entry corresponds to one WAN routing service.
Indexes
alaSpxKeepaliveSpoofVlanId
Column Syntax OID
alaSpxKeepaliveSpoofVlanId
The VlanId of the WAN routing service that this entry
applies to. If VlanId equals 0, the filter
is applied globally to all WAN Vlans.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4.1.1
alaSpxKeepaliveSpoofMode
This controls whether the SPX Keepalive Spoofing is
enabled or disabled.When enabled, this routing service
will spoof SPX Keepalive packets.When disabled,
this routing service will not spoof SPX Keepalive packets.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4.1.2
alaSpxKeepaliveSpoofRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxKeepaliveSpoofTable is constrained
by the operational state o…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4.1.3

alaIpxType20Table

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5 · 1 row entry · 3 columns
Open in standard view 
The IPX Type 20 Table contains information about
all of the current Type 20 filtering entry statuses.
alaIpxType20Entry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5.1
Each entry corresponds to one Virtual LAN.
Indexes
alaIpxType20VlanId
Column Syntax OID
alaIpxType20VlanId
The VLAN Id of the routing interface that this entry
applies to. If VlanId equals 0, the filter
is applied globally.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5.1.1
alaIpxType20Mode
This controls whether IPX Type 20 packet are
enabled or disabled.When enabled, this routing interface
will forward Type 20 packets.When disabled,
the packets will not.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5.1.2
alaIpxType20RowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxType20Table is constrained
by the operational state of the co…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5.1.3

alaIpxTimerTable

table
.1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1 · 1 row entry · 4 columns
Open in standard view 
The IPX Timer Table contains information about
all of the current Timer adjustments entry statuses.
alaIpxTimerEntry entry .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1
Each entry corresponds to one Virtual LAN.
Indexes
alaIpxTimerVlanId
Column Syntax OID
alaIpxTimerVlanId
The VLAN Id of the routing interface that this entry
applies to. If VlanId equals 0, the filter
is applied globally.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1.1
alaIpxTimerSap
This controls whether IPX SAP packet timer duration.
Integer32r/w
Constraints:
range: 1-180
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1.2
alaIpxTimerRip
This controls whether IPX RIP packet timer duration.
Integer32r/w
Constraints:
range: 1-180
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1.3
alaIpxTimerRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The RowStatus of
a currenty active row in the alaIpxTimerTable is constrained
by the operational state of the cor…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1.4