ALCATEL-IND1-CHASSIS-MIB Table View

This table contains one row per physical entity. It is an extension for
the entity physical table (rfc 2737) that is instantiated for every physical entity
object. The fields are not always significant for every object.

chasEntPhysicalEntry row .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1

Information about a particular physical entity.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
chasEntPhysAdminStatus All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value: powerOn <=> powered up Control Module possible value: powerOn <=> CM u…	Enumerationr/w Enumerated Values: 1 unknown 2 powerOff 3 powerOn 4 reset 5 takeover 6 resetAll 7 standby 8 resetWithFabric 9 takeoverWithFabrc	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.1
chasEntPhysOperStatus All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value : up <=> powered up Control Module possible value : notPresent <=> CM n…	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 unknown 5 secondary 6 notPresent 7 unpowered 8 master	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.2
chasEntPhysLedStatusdeprecated This object has been deprecated because the other enumerated objects can provide the same information. A get to this object will return 0. The status of each of the LEDs of this module. Fuj…	Bits Enumerated Values: 0 ok1GreenLSBit 1 ok1GreenMSBit 2 ok1AmberLSBit 3 ok1AmberMSBit 4 ok2GreenLSBit 5 ok2GreenMSBit 6 ok2AmberLSBit 7 ok2AmberMSBit 8 controlGreenLSBit 9 controlGreenMSBit 10 controlAmberLSBIt 11 controlAmberMSBIt 12 fabricGreenLSBit 13 fabricGreenMSBit 14 fabricAmberLSBit 15 fabricAmberMSBit 16 tempGreenLSBit 17 tempGreenMSBit 18 tempAmberLSBit 19 tempAmberMSBit 20 fanGreenLSBit 21 fanGreenMSBit 22 fanAmberLSBit 23 fanAmberMSBit 24 powerSupGreenLSBit 25 powerSupGreenMSBit 26 powerSupAmberLSBit 27 powerSupAmberMSBit 28 backupPowerSupGreenLSBit 29 backupPowerSupGreenMSBit 30 backupPowerSupAmberLSBit 31 backupPowerSupAmberMSBit	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.3
chasEntPhysPower This value is only applicable to the NI, PS and Control Modules. It corresponds to a a static value for the power consumption of an NI module or Control Module. This value is in Watts.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.4
chasEntPhysModuleType This object is the unique Module Type or ID from the entities eeprom. This value is guarrantteed to be unique to each type of Module. This value is only intended for Alcatel internal use.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.5
chasEntPhysMfgDate This object contains the manufacturing date of the entity. Its format is mmm dd yyyy : NOV 27 2001.	OctetString Constraints: range: 0-11	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.6
chasEntPhysPartNumber This object contains the Alcatel Part Number for the entity. This value is used to identify what is needed when placing orders with Alcatel.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.7
chasEntPhysLedStatusOk1 Chassis Management Module (CMM) front panel LED OK1 status indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.8
chasEntPhysLedStatusOk2 Chassis Management Module (CMM) front panel LED OK2 status indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.9
chasEntPhysLedStatusPrimaryCMM Chassis Management Module (CMM) front panel LED Primary chassis indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.10
chasEntPhysLedStatusSecondaryCMM Chassis Management Module (CMM) front panel LED Secondary chassis indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.11
chasEntPhysLedStatusTemperature Chassis Management Module (CMM) front panel LED temperature status indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.12
chasEntPhysLedStatusFan For Hawk stacks used as a fan group status LED. For eagle CMM's user instead: Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.13
chasEntPhysLedStatusFan1 Chassis fan status, Eagle (top left), Fuji (top right)	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.14
chasEntPhysLedStatusFan2 Chassis fan status, Eagle (top right), Fuji (middle right)	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.15
chasEntPhysLedStatusFan3 Chassis fan status, Eagle (rear), Fuji (bottom right)	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.16
chasEntPhysLedStatusBackupPS Chassis backup power supply status indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.17
chasEntPhysLedStatusInternalPS Chassis internal power supply status indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.18
chasEntPhysLedStatusControl Chassis control status	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.19
chasEntPhysLedStatusFabric Chassis Management Module (CMM) Fabric status indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.20
chasEntPhysLedStatusPSU Chassis Power Supply Unit status indication	ChasEntPhysLed Type Values: 0 notApplicable 1 off 2 greenOn 3 greenBlink 4 amberOn 5 amberBlink	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.21
chasEntPhysAsicRev This object contains the ASIC revision Number of the ni entity	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.22
chasEntPhysCpldRev This object contains the CPLD revision Number of the ni entity	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.23
chasEntPhysDefaultMinibootRev This object contains the default miniboot version Number of the ni entity	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.24
chasEntPhysBackUpMinibootRev This object contains the backup miniboot version Number of the ni entity	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.25
chasEntPhysBootromRev This object contains the bootrom version Number of the ni entity	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.26
chasEntPhysNiNum This value is only applicable to the NI. It indicates an NI associated with this physicalEntry	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.27
chasEntPhysGbicNum This value is only applicable to the NI. It indicates a gbic associated with this ni	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.28
chasEntPhysWaveLen This object contains the wave length of a SFP device	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.29
chasEntPhysUbootRev This object contains the uboot version Number of the ni entity	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.30
chasEntPhysUbootMinibootRev This object contains the uboot miniboot version Number of the ni entity	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.31
chasEntPhysMacAddress This object contains the MAC address of the ni entity	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.32
chasEntPhysPoeSwVersion This object contains the POE SW Revision of the ni entity	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.33
chasEntPhysC20LFailCont This object contains the C20L upgrade failure count of the ni entity	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.34
chasEntPhysCpuModel This object contains the model description of the cmm/ni cpu	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.35
chasEntPhysPowerType This object specifies the type(AC/DC) of power supply.	ChasEntPhysPowerType Type Values: 0 notApplicable 1 ac 2 dc	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.36
chasEntPhysPowerControlChecksum This object specifies the power control checksum.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.37
chasEntPhysDdmStatus This object contains the Ddm Status of a SFP device	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.38

This table contains one row for the primary control module.

chasControlModuleEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1

Information about the primary control module. This table is an extension
of the entity physical table but this class is instanciated only for a
the primary control module that has a particular Index.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
chasControlRunningVersion Identification of the Running Version (or Running Configuration) for the control module. Note that the Running Version value of (1) unknown, (2) working, or (3) certified is returned.	Enumeration Enumerated Values: 1 unknown 2 working 3 certified	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.1
chasControlActivateTimeout This value is in seconds. It represents how much time before the switch automatically falls back to the certified version. This value is set via the Activate(reload working) cli command. An Activate reboot must be initi…	Integer32r/w Constraints: range: 0-900	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.2
chasControlVersionMngt For the primary this means: notSignificant - No command applied. certifySynchro - Copy the file from the working to the certified directory and from the primary to the secondary (reboot of the seco…	Enumerationr/w Enumerated Values: 1 notSignificant 2 certifySynchro 3 certifyNoSynchro 4 flashSynchro 5 restore 6 activate	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.3
chasControlDelayedActivateTimer Timer value in seconds used to initiate a delayed activate of the primary CMM. Writing this object to a non-zero value results in CMM reboot of the working directory following expiration of the specified activate timer…	Unsigned32r/w Constraints: range: 0-31622400	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.4
chasControlCertifyStatus Returned value indicates if the control module has been certified (that is the working directory matches the certified directory)	Enumeration Enumerated Values: 1 unknown 2 needCertify 3 certified	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.5
chasControlSynchronizationStatus Returned value indicates if the control module has been synchronized (that is the working directory matches the working directory on the other control module(s) if present). Returned value is monoControlModule when no…	Enumeration Enumerated Values: 1 unknown 2 monoControlModule 3 notSynchronized 4 synchronized	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.6
chasControlAcrossCmmWorkingSynchroStatus Returned value indicates if the /working has been synchronized across the CMMs (that is the working directory matches the working directory on all CMMs if present)	Enumeration Enumerated Values: 1 unknown 2 monoCMM 3 no 4 yes	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.7
chasControlAcrossCmmCertifiedSynchroStatus Returned value indicates if the /certified has been synchronized across the CMMs if present)	Enumeration Enumerated Values: 1 unknown 2 monoCMM 3 no 4 yes	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.8

This table contains one row per control module. There is always at least
one control module in the system.

chasControlRedundantEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1

Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
chasControlNumberOfTakeover This object is a count of the number of times the control module has changed from primary to secondary mode as a result of a Takeover. Note that this object can be accessed via user interface to either the primary or se…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.1
chasControlDelayedRebootTimer Timer value (in seconds) used to initiate a delayed reboot of the primary or secondary CMM using the certified configuration. Writing this object to a non-zero value results in a CMM reboot following expiration of the …	Unsigned32r/w Constraints: range: 0-31622400	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.2

This table contains one row per chassis. There is always at least one
chassis or many like for stackable product.

chasChassisEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1

Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
chasFreeSlots The number of free NI front panel slots.	Unsigned32 Constraints: range: 0-18	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.1
chasPowerLeft The power still available on the chassis in Watts.	Integer32 Constraints: range: -100000-100000	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.2
chasNumberOfResets This object is a count of the number of times this station has been reset since a cold-start.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.3
chasHardwareBoardTemp This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for this chassis. This temperature is what is used for comparing to the threshold and determining w…	Integer32 Constraints: range: 0-200	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.4
chasHardwareCpuTemp This object indicates the current output of the SPARC Temperature Sensor (degrees Centigrade) for this chassis. This object is not applicable for Hawk and 0 is returned	Integer32 Constraints: range: 0-200	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.5
chasTempRange Temp Range is the value of the temperature sensor for the chassis. The Temp Range value reflects the temperature of the chassis relative to the Temp Threshold value (i.e., over vs. under the threshold).	Enumeration Enumerated Values: 1 unknown 2 notPresent 3 underThreshold 4 overFirstThreshold 5 overDangerThreshold	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.6
chasTempThreshold This object is the threshold temperature in degrees Celsius for the chassis. Temp Threshold is the chassis temperature point at which, when reached due to an ascending or descending temperature transition, a temperature…	Integer32r/w Constraints: range: 1-150	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.7
chasDangerTempThreshold This Threshold is a second one which is hardcoded. When the Chassis Exceeds this value it starts shutting down NIs. This value will be set by the factory and not changeable.	Integer32 Constraints: range: 30-150	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.8
chasPrimaryPhysicalIndex This value holds the Entity Table Physical Index for the Control Module that is currently primary. This is to allow snmp managers to determine which Control Module is currently primary so it knows what entry in the chas…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.9

This table contains a list of file on the remote chassis per directory.

chasSupervisionRfsLsEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1

Information about a remote file.
A row in this table contains a file per directory per chassis

Indexes

chasSupervisionRfsLsFileIndex

Column	Syntax	OID
chasSupervisionRfsLsFileIndex This value holds file Index for the RFS LS table.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.1
chasSupervisionRfsLsSlot Slot where remote file is located.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.2
chasSupervisionRfsLsDirName The remote directory name where remote file is located in	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.3
chasSupervisionRfsLsFileName The file name of remote file	OctetString Constraints: range: 0-33	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.4
chasSupervisionRfsLsFileType The Type of a remote file	Enumeration Enumerated Values: 1 file 2 directory 3 undefined 4 tarArchive	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.5
chasSupervisionRfsLsFileSize size of this remote file	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.6
chasSupervisionRfsLsFileAttr attributes of this remote file	Enumeration Enumerated Values: 1 undefined 2 readOnly 3 readWrite 4 writeOnly	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.7
chasSupervisionRfsLsFileDateTime the modification date and time of a remote file	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.8

Table containing reload status of each network interface
slot or stack module

chasControlReloadEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1

Entry of a network interface reload status

Indexes

chasControlReloadIndex

Column	Syntax	OID
chasControlReloadIndex Entry of a network interface reload status	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.1
chasControlReloadStatus Returned value indicates if the network interface module is enabled or disabled for reload.	Enumeration Enumerated Values: 1 reloadEnabled 2 reloadDisabled 3 noInterface 4 unknown	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.2

This table contains information about file system size and use.

chasSupervisionRfsDfEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1

This entry contains information about file system size and use.

Indexes

chasSupervisionRfsDfSlot

Column	Syntax	OID
chasSupervisionRfsDfSlot CMM Slot where flash space is evaluated. Slot index 1-16 will return slot 1-16 flash drive information. Slot index 17-32 will return slot 1-16 uflash drive information.	Enumeration Enumerated Values: 1 slot1Flash 2 slot2Flash 3 slot3Flash 4 slot4Flash 5 slot5Flash 6 slot6Flash 7 slot7Flash 8 slot8Flash 9 slot9Flash 10 slot10Flash 11 slot11Flash 12 slot12Flash 13 slot13Flash 14 slot14Flash 15 slot15Flash 16 slot16Flash 17 slot1Uflash 18 slot2Uflash 19 slot3Uflash 20 slot4Uflash 21 slot5Uflash 22 slot6Uflash 23 slot7Uflash 24 slot8Uflash 25 slot9Uflash 26 slot10Uflash 27 slot11Uflash 28 slot12Uflash 29 slot13Uflash 30 slot14Uflash 31 slot15Uflash 32 slot16Uflash	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.1
chasSupervisionRfsDfFlashFree Number bytes free on the file system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.2
chasSupervisionRfsDfFlashSize Number of total bytes on the file system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.3

This table contains the systems flash memory information.

chasSupervisionFlashMemEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1

This contains one entry for the flash memory table.

Indexes

chasSupervisionSlot

Column	Syntax	OID
chasSupervisionSlot CMM Slot where flash space is evaluated.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.1
chasSupervisionFlashSize Flash memory size.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.2
chasSupervisionFlashFree Number bytes free on file system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.3
chasSupervisionFlashUsed A rounded up percentage of Flash Memory used.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.4

This table contains...

chasSupervisionCmmCertifiedEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1

Information about...

Indexes

chasSupervisionCmmNum

Column	Syntax	OID
chasSupervisionCmmNum CMM Slot where /certified directory is evaluated.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.1
chasSupervisionCmmCertifiedStatus The status of the CMM certified directory - certified or not.	Enumeration Enumerated Values: 0 notPresent 1 yes 2 no	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.2

This table contains one row per physical fan entity.

alaChasEntPhysFanEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1

Information about a particular fan in a chassis physical entity.

Indexes

ENTITY-MIBentPhysicalIndex alaChasEntPhysFanLocalIndex

Column	Syntax	OID
alaChasEntPhysFanLocalIndex Index to a chassis fan entity	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.1
alaChasEntPhysFanStatus Chassis fan operational status	Enumeration Enumerated Values: 0 noStatus 1 notRunning 2 running	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.2

This table contains BPS connector priority for each slot

alaChasBpsEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1

Information about bps connector priority for each slot

Indexes

alaChasBpsNiNum

Column	Syntax	OID
alaChasBpsNiNum Numbers allocated for the stack NIs as follows: - 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable	Unsigned32 Constraints: range: 1-8	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.1
alaChasBpsConnectorPriority This object specifies the bps connector priority.	Unsigned32r/w Constraints: range: 1-8	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.2
alaChasBpsConnectorNum This object specifies the bps connector num.	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.3

This table contains   BPS power supplies details

alaChasBpsPowerSupplyEntry row .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1

Information about a particular BPS power supply

Indexes

alaChasBpsPowerSupplyIndex

Column	Syntax	OID
alaChasBpsPowerSupplyIndex This value hold BPS power power supply Index	Unsigned32 Constraints: range: 1-5	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.1
alaChasBpsPowerSupplyName This object hold name of BPS power supply	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.2
alaChasBpsPowerSupplyDescr This object hold description of BPS power supply	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.3
alaChasBpsPowerSupplyModuleType This object is unique module Type or ID from BPS entities eeprom	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.4
alaChasBpsPowerSupplyPartNumber This object contains the BPS power supply Part Number	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.5
alaChasBpsPowerSupplyHardwareRev The vendor-specific hardware revision string for the BPS power supplies Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.6
alaChasBpsPowerSupplySerialNum The vendor-specific serial number string for the BPS power supplies	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.7
alaChasBpsPowerSupplyMfgDate This object contains the manufacturing date of the BPS power supplies . Its format is mmm dd yyyy : NOV 27 2012.	OctetString Constraints: range: 0-11	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.8
alaChasBpsPowerSupplyOperStatus Oper status of BPS power supply	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.9
alaChasBpsPowerSupplyPowerProv It corresponds to max power of BPS power supply. This value is in Watts.	Integer32 Constraints: range: 0-2000	.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.10