ALCATEL-ENT1-RIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
17
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11 · 1 row entry · 8 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaRip2IfConfAugTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-RIP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-RIP-MIB::alaRip2IfConfAugTable'
Expansion for rip2ifconftable
alaRip2IfConfAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1
An entry of alaRip2IfConfAugTable
Indexes
No indexes recorded
Column Syntax OID
The authentication encryption key that is used to decypher
RIP passwords.
AlaAuthenticationEncryptKeyr/w
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.1
The status of the associated IP interface
Enumeration
Enumerated Values:
1enable
2disable
3none
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.2
Number of packets received on this interface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.3
The user defined name used to identify the IP interface
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.4
The type of the rip interface
Enumerationr/w
Enumerated Values:
1broadcast
2point2point
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.5
The address of the peer for a point-to-point rip interface
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.6
The name of a Route Map to be applied when filtering
RIP routing updates received on this RIP interface. RIP
routes that are explicitly denied by a Route Map are
filtered. An empty string indicates that no filtering
act…
OctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.7
The name of a Route Map to be applied when filtering
RIP routing updates sent out this RIP interface. RIP
routes that are explicitly denied by a Route Map are
filtered. An empty string indicates that no filtering
action…
OctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.8
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12 · 1 row entry · 9 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaRipEcmpRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-RIP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-RIP-MIB::alaRipEcmpRouteTable'
ECMP-enabled RIP routing table which contains the network routes.
alaRipEcmpRouteEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1
ECMP-enabled RIP routing table which contains the network routes.
Column Syntax OID
The destination IP address of this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.1
The network mask for this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.2
The address of the next hop to reach this route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.3
The type of route.
Enumeration
Enumerated Values:
1local
2remote
3redistribute
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.4
The number of seconds since this route was last
updated or otherwise determined to be correct.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.5
The associated route tag.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.6
The routing metric for this route.
Integer32
Constraints:
range: 0-15
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.7
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.8
The associated state for this route.
Enumeration
Enumerated Values:
1active
2garbage
3holddown
4unknown
.1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.9