ALCATEL-ENT1-OSPF-MIB Table View

OSPF routing table which contains the network routes.

alaOspfRouteEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1

OSPF routing table which contains the network routes.

Indexes

alaOspfRouteDest alaOspfRouteMask alaOspfRouteTos alaOspfRouteNextHop

Column	Syntax	OID
alaOspfRouteDest The destination IP address of this route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.1
alaOspfRouteMask The network mask for this route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.2
alaOspfRouteTos Type Of Service (TOS) for this route.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.3
alaOspfRouteNextHop The address of the next hop to reach this route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.4
alaOspfRouteIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.5
alaOspfRouteType The type of route.	Enumeration Enumerated Values: 1 intraArea 2 interArea 3 externalType1 4 externalType2 5 nssaExternalType1 6 nssaExternalType2	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.6
alaOspfRouteAge The number of seconds since this route was last updated or otherwise determined to be correct.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.7
alaOspfRouteTag The associated route tag for external roues. It's 0 for routes internal to the autonomous system.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.8
alaOspfRouteMetric1 The primary routing metric for this route.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.9
alaOspfRouteMetric2 An alternate routing metric for this route. It's 0 for internal routes. For an external route, it's the metric to reach the ASBR that announced the external route.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.10
alaOspfRouteStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.11

OSPF routing table which contains the routes to border
(ABR and ASBR) routers.

alaOspfBdrRouterEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1

OSPF routing table which contains the routes to border
(ABR and ASBR) routers.

Indexes

alaOspfBdrRouterAreaId alaOspfBdrRouterId alaOspfBdrRouterTos alaOspfBdrRouterNextHop

Column	Syntax	OID
alaOspfBdrRouterAreaId The area to which the border router belongs to.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.1
alaOspfBdrRouterId The router idenitifer of this border router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.2
alaOspfBdrRouterTos Type Of Service (TOS) for this route.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.3
alaOspfBdrRouterNextHop The address of the next hop to reach this border router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.4
alaOspfBdrRouterIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.5
alaOspfBdrRouterType The type of border router.	Enumeration Enumerated Values: 1 abr 2 asbr 3 abrAsbr	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.6
alaOspfBdrRouterAge The number of seconds since this route was last updated or otherwise determined to be correct.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.7
alaOspfBdrRouterMetric The cost to reach the border router.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.8
alaOspfBdrRouterStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.9

The OSPF Interface MD5 Table describes the MD5 key
management for OSPF interfaces.

alaOspfIfMd5Entry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1

The OSPF Interface MD5 Entry describes the MD5 key
management for OSPF interfaces.

Indexes

alaOspfIfMd5IpAddress alaOspfIfMd5KeyId

Column	Syntax	OID
alaOspfIfMd5IpAddress The IP address of this OSPF MD5 key interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.1
alaOspfIfMd5KeyId A key identifier which identifies the algorithm and MD5 secret key associated with this interface.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.2
alaOspfIfMd5Key The MD5 message digest key.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.3
alaOspfIfMd5KeyStartAccept The time that OSPF router will start accepting packets that have been created with this key.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.4
alaOspfIfMd5KeyStopAccept The time that OSPF router will stop accepting packets that have been created with this key.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.5
alaOspfIfMd5KeyStartGenerate The time that OSPF router will start using this key for packet generation.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.6
alaOspfIfMd5KeyStopGenerate The time that OSPF router will stop using this key for packet generation.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.7
alaOspfIfMd5RowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.8
alaOspfIfMd5EncryptKey The MD5 message digest Encrypted key.	AlaAuthenticationEncryptKeyr/w Type Constraints: range: 16	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.9
alaOspfIfMd5AuthMode The Cryptographic authentication algorithm to be used to generate and verify the message digest. The currently supported algorithms are Keyed-MD5 (RFC 2328, Appendix D) and HMAC-SHA-256 (RFC 5709).	Enumerationr/w Enumerated Values: 1 keyedMd5 2 hmacSha256	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.10

Expansion for ospfIfTable

alaOspfIfAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1

An entry of alaOspfIfAugTable

Indexes

No indexes recorded

Column	Syntax	OID
alaOspfIfEncryptKey The authentication encryption key that is used to decypher OSPF passwords.	AlaAuthenticationEncryptKeyr/w Type Constraints: range: 16	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.1
alaOspfIfIpMask The IP mask of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.2
alaOspfIfVlanId Vlan Identifier associated with this interface	Integer32 Constraints: range: 0-4097	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.3
alaOspfIfDrRouterid Router Id of Designated router for this interface	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.4
alaOspfIfBdrRouterid Router Id of Backup Designated router for this interface	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.5
alaOspfIfMTU Max Transfer size of OSPF packets on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.6
alaOspfIfInitNbrs Number of ospf INIT state neighbors on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.7
alaOspfIfExchNbrs Number of ospf EXCHANGE state neighbors on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.8
alaOspfIfFullNbrs Number of ospf FULL state neighbors on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.9
alaOspfIfLinkType Type of physical medium used for transmission of OSPF packets	Enumeration Enumerated Values: 1 broadcast	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.10
alaOspfIfOperStatus Operational status of this interface	Enumeration Enumerated Values: 0 down 1 up	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.11
alaOspfIfIntfName The user defined name used to identify the IP interface	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.12
alaOspfIf2WayNbrs Number of ospf 2-WAY state neighbors on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.13
alaOspfIfBfdStatus Enables/Disables OSPF for a BFD interface	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.14
alaOspfIfBfdDrsOnly Enables/Disables Drs Only option for a BFD interface	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.15

Expansion for ospfVirtIfTable

alaOspfVirtIfAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18.1

An entry of alaOspfVirtIfAugTable

Indexes

No indexes recorded

Column	Syntax	OID
alaOspfVirtIfEncryptKey The authentication encryption key that is used to decypher OSPF passwords.	AlaAuthenticationEncryptKeyr/w Type Constraints: range: 16	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18.1.1
alaOspfVirtIfOperStatus Operational status of the virtual link	Enumeration Enumerated Values: 0 down 1 up	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18.1.2

Extensions to the ospfNbrTable

alaOspfNbrAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1

Additions to neighbor table

Indexes

No indexes recorded

Column	Syntax	OID
alaOspfNbrRestartHelperStatusdeprecated Indicates whether the router is acting as a hitless restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.1
alaOspfNbrRestartHelperAgedeprecated Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.2
alaOspfNbrRestartHelperExitReasondeprecated Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.3
alaOspfNbrAreaId The area to which this neighbor belongs	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.4
alaOspfNbrDrAddress Designated router of this neighbor	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.5
alaOspfNbrBdrAddress Backup Designated router of this neighbor	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.6
alaOspfNbrType Neighbors learned via the OSPF Hello protocol are dynamic. Configured neighbors are static	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.7
alaOspfNbrMode Current neighbor mode. This is applicable only during adjacency formation	Enumeration Enumerated Values: 1 slave 2 master 3 slaveHold	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.8
alaOspfNbrMd5SeqNo Sequence number used in Md5 authentication	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.9
alaOspfNbrLastHello No of seconds elapsed since the last hello was received from this neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.10
alaOspfNbrPendingLSreq Number of outstanding link state requests to be sent to this neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.11
alaOspfNbrPendingLSack Number of outstanding link state acknowledgements to be sent to this neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.12
alaOspfNbrPendingLSupd Number of outstanding link state update packets to be sent to this neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.13

Extensions to ospfVirtNbrTable

alaOspfVirtNbrAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1

Information regarding a single virtual neighbor.

Indexes

No indexes recorded

Column	Syntax	OID
alaOspfVirtNbrRestartHelperStatusdeprecated Indicates whether the router is acting as a hitless restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.1
alaOspfVirtNbrRestartHelperAgedeprecated Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.2
alaOspfVirtNbrRestartHelperExitReasondeprecated Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.3
alaOspfVirtNbrDrAddr Designated router of this virtual neighbor	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.4
alaOspfVirtNbrBdrAddr Backup Designated router of this virtual neighbor	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.5
alaOspfVirtNbrMode Current neighbor mode. This is applicable only during adjacency formation	Enumeration Enumerated Values: 1 slave 2 master 3 slaveHold	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.6
alaOspfVirtNbrMd5SeqNo Sequence number used in Md5 authentication	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.7
alaOspfVirtNbrLastHello No of seconds elapsed since the last hello was received from this neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.8
alaOspfVirtNbrPendingLSreq Number of outstanding link state requests to be sent to this neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.9
alaOspfVirtNbrPendingLSack Number of outstanding link state acknowledgements to be sent to this neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.10
alaOspfVirtNbrPendingLSupd Number of outstanding link state update packets to be sent to this neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.11

Extensions to ospfAreaTable

alaOspfAreaAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1

Area table additions

Indexes

No indexes recorded

Column	Syntax	OID
alaOspfAreaOperStatus Operational status of the area	Enumeration Enumerated Values: 1 inactive 2 up 3 down	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.1
alaOspfAreaLastSpfRun Time in secs since last SPF ran for this area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.2
alaOspfAreaActiveVlinks Number of active virtual links in this area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.3
alaOspfAreaIncrSpfRuns The number of times that incremental SPF has been run for this area to calculate inter-area routes	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.4
alaOspfAreaInitNbrs Number of ospf INIT state neighbors in this area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.5
alaOspfAreaExchNbrs Number of ospf EXCHANGE state neighbors in this area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.6
alaOspfAreaFullNbrs Number of ospf FULL state neighbors in this area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.7
alaOspfAreaNumIntfs Number of interfaces in this area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.8
alaOspfAreaAttachedIntfs List of interfaces attached to this area	OctetString Constraints: range: 0-2200	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.9
alaOspfArea2WayNbrs Number of ospf 2-WAY state neighbors in this area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.10
alaOspfAreaNssaTranslatorRoledeprecated Specifies whether or not an NSSA border router will unconditionally translate Type-7 LSAs into Type-5 LSAs. When set to always, an NSSA border router always translates Type-7 LSAs into Type-5 LSAs regardless of the tran…	Enumeration Enumerated Values: 1 always 2 candidate 3 none	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.11
alaOspfAreaNssaTranslatorStabilityIntervaldeprecated Defines the length of time (in seconds) an elected Type-7 translator will continue to perform its translator duties once it has determined that its translator status has been deposed by another NSSA border router transl…	Integer32 Constraints: range: 0-120	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.12
alaOspfAreaNssaImportSetPbit Specifies whether or not an NSSA AS boundary router sets the P-bit when external routes are imported into the NSSA as Type-7 LSAs. For non-NSSA boundary routers, this value is not defined and will be none.	Enumeration Enumerated Values: 1 propagate 2 doNotPropagate 3 none	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.13
alaOspfAreaNssaTranslatorStatedeprecated The state of the NSSA Translator, for NSSA border routers. For non-NSSA border routers, the state is none.	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled 4 none	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.14
alaOspfAreaNssaElectedTranslatorRouterId The elected/current NSSA translator router id elected by this NSSA border router. For non-NSSA border router, this object is not defined.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.15

Extensions to ospfExtLsdbTable

alaOspfExtLsdbAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1

External Link state database additions

Indexes

No indexes recorded

Column	Syntax	OID
alaOspfExtLsdbProto Protocol through which this external LSA was learnt	Enumeration Enumerated Values: 1 local 2 static 3 direct 4 rip 5 ospf 6 isis 7 bgp	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.1
alaOspfExtLsdbRouteTag A 32-bit value attached to each external route.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.2
alaOspfExtLsdbFwdAddr The address to which data traffic for the advertised destination is to be forwarded. If the Forwarding address is set to 0.0.0.0, data traffic is to be forwarded to the LSA's originator.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.3
alaOspfExtLsdbMetricType The type of external metric.	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.4
alaOspfExtLsdbMetric The OSPF External TOS 0 Metric.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.5
alaOspfExtLsdbLength The length of the AS External Link-State Advertisement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.6
alaOspfExtLsdbMask The IP address mask for the advertised destination.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.7

Extensions to ospfAreaAggregateTable

alaOspfAreaAggregateAugEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38.1

Additions to the area aggregate table

Indexes

No indexes recorded

Column	Syntax	OID
alaOspfAreaAggregateMetric If set, this value is used as the metric for the area aggregate route, overriding the calculated metric	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38.1.1