ALCATEL-ENT1-DVMRP-MIB
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This MIB contains management information for Coronado Layer
3 Hardware Routing Engine (HRE) management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE
- Source file
ALCATEL-ENT1-DVMRP-MIB- Last revised
- Identity
alcatelIND1DVMRPMIB- Base OID
1.3.6.1.4.1.6486.801.1.2.1.10.7.1
Imported Objects
| ALCATEL-ENT1-BASE | routingIND1Dvmrp |
| DVMRP-STD-MIB | dvmrpInterfaceEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | TruthValue |
Net-SNMP examples using the alcatel-ent1 MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALCATEL-ENT1-DVMRP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALCATEL-ENT1-DVMRP-MIB::alcatelIND1DVMRPMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DVMRP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DVMRP-MIB::alcatelIND1DVMRPMIB'
Objects (28)
Showing 28 of 28 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.1 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.10 |
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.11 |
||
|
Enumeration
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.12 |
|
|
Enumeration
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.13 |
|
|
Enumeration
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.14 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.2 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.3 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.4 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.5 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.6 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.7 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.8 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.9 |
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1.2 |
|
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2 |
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ALCATEL-ENT1-BASEalcatel-ent1
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- DVMRP-STD-MIBalcatel-ent1
- ALCATEL-ENT1-DVMRP-MIBalcatel-ent1selected
Conformance Groups (3)
|
alaDvmrpAdminStatus alaDvmrpRouteReportInterval alaDvmrpFlashUpdateInterval alaDvmrpNeighborTimeout alaDvmrpRouteExpirationTimeout alaDvmrpRouteHoldDown alaDvmrpNeighborProbeInterval alaDvmrpPruneLifetime alaDvmrpPruneRetransmission alaDvmrpGraftRetransmission alaDvmrpInitNbrAsSubord alaDvmrpBfdStatus alaDvmrpBfdAllInterfaceStatus alaDvmrpMbrOperStatus
A collection of objects to support the management of global
configuration parameters on DVMRP routers. |
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.1
|
|
|
These objects are required to provide additional information
about configured DVMRP tunnels not found in the standard tunnel MIB. |
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.2
|
|
|
These objects are required to provide additional information
about configured DVMRP interfaces not found in the standard tunnel MIB. |
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.3
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.1.1The compliance statement for routers running DVMRP
and implementing the ALCATEL-IND1-DVMRP MIB.
and implementing the ALCATEL-IND1-DVMRP MIB.
Required groups
| mandatory | alaDvmrpConfigMIBGroup | |
| mandatory | alaDvmrpTunnelXIfMIBGroup | |
| mandatory | alaDvmrpIfConfigGroup |