ALCATEL-ENT1-CHASSIS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
16
Rows
16
Columns
136
chasEntPhysicalTable
table.1.3.6.1.4.1.6486.801.1.1.1.1.1.1
·
1 row entry
·
39 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasEntPhysicalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasEntPhysicalTable'
This table contains one row per physical entity. It is an extension for the entity physical table (rfc 2737) that is instantiated for every physical entity object. The fields are not always significant for every object.
Information about a particular physical entity.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| chasEntPhysAdminStatusAll modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value: powerOn <=> powered up Control Module possible value: powerOn <=> … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.1 | ||||||||||||||||||||||
| chasEntPhysOperStatusAll modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value : up <=> powered up Control Module possible value : notPr… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2 | ||||||||||||||||||||||
| chasEntPhysPowerThis value is only applicable to the NI, PS and Control Modules. It corresponds to a a static value for the power consumption of an NI module or Control Module. This value is in Watts. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.3 | ||||||||||||||||||||||
| chasEntPhysModuleTypeThis object is the unique Module Type or ID from the entities eeprom. This value is guarrantteed to be unique to each type of Module. This value is only intended for Alcatel internal use. | SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.4 | ||||||||||||||||||||||
| chasEntPhysPartNumberThis object contains the Alcatel Part Number for the entity. This value is used to identify what is needed when placing orders with Alcatel. | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-16 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.5 | ||||||||||||||||||||||
| chasEntPhysLedStatusOk1Chassis Management Module (CMM) front panel LED OK1 status indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.6 | ||||||||||||||||||||||
| chasEntPhysLedStatusOk2Chassis Management Module (CMM) front panel LED OK2 status indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.7 | ||||||||||||||||||||||
| chasEntPhysLedStatusPrimaryCMMChassis Management Module (CMM) front panel LED Primary chassis indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.8 | ||||||||||||||||||||||
| chasEntPhysLedStatusSecondaryCMMChassis Management Module (CMM) front panel LED Secondary chassis indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.9 | ||||||||||||||||||||||
| chasEntPhysLedStatusTemperatureChassis Management Module (CMM) front panel LED temperature status indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.10 | ||||||||||||||||||||||
| chasEntPhysLedStatusFanFor Hawk stacks used as a fan group status LED. For eagle CMM's user instead: Fan 1 (top left), Fan 2 (top right), Fan 3 (rear) | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.11 | ||||||||||||||||||||||
| chasEntPhysLedStatusBackupPSChassis backup power supply status indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.12 | ||||||||||||||||||||||
| chasEntPhysLedStatusInternalPSChassis internal power supply status indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.13 | ||||||||||||||||||||||
| chasEntPhysLedStatusControlChassis control status | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.14 | ||||||||||||||||||||||
| chasEntPhysLedStatusFabricChassis Management Module (CMM) Fabric status indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.15 | ||||||||||||||||||||||
| chasEntPhysLedStatusPSChassis Power Supply Unit status indication | ChasEntPhysLed Type Values:
Description: Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber. | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.16 | ||||||||||||||||||||||
| chasEntPhysAsic1RevThis object contains the ASIC revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.17 | ||||||||||||||||||||||
| chasEntPhysAsic2RevThis object contains the ASIC revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.18 | ||||||||||||||||||||||
| chasEntPhysAsic3RevThis object contains the ASIC revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.19 | ||||||||||||||||||||||
| chasEntPhysAsic4RevThis object contains the ASIC revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.20 | ||||||||||||||||||||||
| chasEntPhysAsic5RevThis object contains the ASIC revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.21 | ||||||||||||||||||||||
| chasEntPhysAsic6RevThis object contains the ASIC revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.22 | ||||||||||||||||||||||
| chasEntPhysCpldRevThis object contains the CPLD revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.23 | ||||||||||||||||||||||
| chasEntPhysDaughterFpga1RevThis object contains the daughter fpga revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.24 | ||||||||||||||||||||||
| chasEntPhysDaughterFpga2RevThis object contains the daughter fpga revision Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.25 | ||||||||||||||||||||||
| chasEntPhysNiNumThis value is only applicable to the NI. It indicates an NI associated with this physicalEntry | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.26 | ||||||||||||||||||||||
| chasEntPhysGbicNumThis value is only applicable to the NI. It indicates a gbic associated with this ni | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.27 | ||||||||||||||||||||||
| chasEntPhysWaveLenThis object contains the wave length of a SFP device | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.28 | ||||||||||||||||||||||
| chasEntPhysUbootRevThis object contains the uboot version Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.29 | ||||||||||||||||||||||
| chasEntPhysUbootMinibootRevThis object contains the uboot miniboot version Number of the ni entity | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.30 | ||||||||||||||||||||||
| chasEntPhysMacAddressThis object contains the MAC address of the ni entity | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.31 | ||||||||||||||||||||||
| chasEntPhysCpuModelThis object contains the model description of the cmm/ni cpu | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-32 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.32 | ||||||||||||||||||||||
| chasEntPhysAirflowChassis PS fan airflow direction | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.33 | ||||||||||||||||||||||
| chasEntPhysPowerUsedThis value is only applicable to the PS. It is the current reading for the power usage of the PS. This value is in Watts. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.34 | ||||||||||||||||||||||
| chasEntPhysPowerTypeThis object is the type of the power supply, It corresponds to AC, DC or BPS. This value is only intended for Alcatel internal use. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.35 | ||||||||||||||||||||||
| chasEntPowerSupplyNameThe name of the power supply of this entry. | SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.36 | ||||||||||||||||||||||
| chasEntPowerSupplyTypeType of power supply. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.37 | ||||||||||||||||||||||
| chasEntPowerSupplyInputTypeType of power supply input. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.38 | ||||||||||||||||||||||
| chasEntPowerSupplyWattageThe wattage of power supply. | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.39 |
chasEntTemperatureTable
table.1.3.6.1.4.1.6486.801.1.1.1.1.1.2
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasEntTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasEntTemperatureTable'
This table contains one row per temperature sensor located on an entity represented by the associated row in the entPhysicalTable.
Information about a particular physical temperature sensor.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| chasEntTempCurrentThis object indicates the current output of the temperature sensor in degrees Celsius. | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.1 | ||||||||||
| chasEntTempThresholdThis object is the threshold temperature in degrees Celsius for the sensor. When the value of chasEntTempCurrent exceeds this value, a temperature notification is provided to the user. | Integer32 Constraints: range: 1-150 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.2 | ||||||||||
| chasEntTempDangerThresholdThis object is the danger threshold temperature in degrees Celsius for the sensor. When the value of chasEntTempCurrent exceeds this value, the associated physical entity is powered down. | Integer32 Constraints: range: 30-150 | .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.3 | ||||||||||
| chasEntTempStatusThis object is the status value of the temperature sensor. It reflects the temperature relative to the chasEntTempThreshold and chasEntTempDangerThreshold values. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.4 |
chasControlModuleTable
table.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1
·
1 row entry
·
14 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasControlModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasControlModuleTable'
This table contains one row for the primary control module.
Information about the primary control module. This table is an extension
of the entity physical table but this class is instanciated only for a
the primary control module that has a particular Index. When operatiing
in …
of the entity physical table but this class is instanciated only for a
the primary control module that has a particular Index. When operatiing
in …
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| chasControlActivateTimeoutThis value is in seconds. It represents how much time before the switch automatically falls back to the certified version. This value is set via the Activate(reload working) cli command. An Activate reboot must be initi… | Integer32r/w Constraints: range: 0-900 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.1 | ||||||||||||||||||
| chasControlVersionMngtFor the primary this means: notSignificant - No command applied. certifySynchro - Copy the file from the working to the certified directory and from the primary to the secondary … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.2 | ||||||||||||||||||
| chasControlDelayedActivateTimerTimer value in seconds used to initiate a delayed activate of the primary CMM. Writing this object to a non-zero value results in CMM reboot of the working directory following expiration of the specified activate timer… | Unsigned32r/w Constraints: range: 0-31622400 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.3 | ||||||||||||||||||
| chasControlCertifyStatusReturned value indicates if the control module has been certified (that is the working directory matches the certified directory) | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.4 | ||||||||||||||||||
| chasControlSynchronizationStatusReturned value indicates if the control module has been synchronized (that is the working directory matches the working directory on the other control module(s) if present). Returned value is monoControlModule when no … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.5 | ||||||||||||||||||
| chasControlAcrossCmmWorkingSynchroStatusReturned value indicates if the /working has been synchronized across the CMMs (that is the working directory matches the working directory on all CMMs if present) | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.6 | ||||||||||||||||||
| chasControlAcrossCmmCertifiedSynchroStatusReturned value indicates if the /certified has been synchronized across the CMMs if present) | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.7 | ||||||||||||||||||
| chasControlNextRunningVersionThe pathname for the image directory that will be used on the next reload. Value may be /flash/certified or /flash/<working directory name>. | SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.8 | ||||||||||||||||||
| chasControlCurrentRunningVersionThe pathname of the image directory to the version that is currently executing. Value may be /flash/certified or /flash/<working directory name>. | SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.9 | ||||||||||||||||||
| chasControlWorkingVersionThe path to the currently specified working image directory. Value may be /flash/certified or /flash/<working directory name>. | SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.10 | ||||||||||||||||||
| chasControlRedundancyTimeTime in minutes that the running image must stay up without error before a subsequent error reset will restart the board from the running image. If a CMM in dual-CMM switch fails after a reload and before chasControlRed… | Integer32r/w Constraints: range: 0-900 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.11 | ||||||||||||||||||
chasControlEmpIpAddressdeprecated This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)when configuring EMP interfaces. The IP Address for the primary control module EMP interface. This address is used for managin… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.12 | ||||||||||||||||||
chasControlEmpIpMaskdeprecated This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)when configuring EMP interfaces. The IP Address Mask for the primary control module EMP interface. This address mask is used f… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.13 | ||||||||||||||||||
| chasControlChassisIdThe virtual chassis id for the action specified by chasControlVersionMngt when operating in virtual chassis mode. A value of 0 indicates the local chassis. | Integer32r/w Constraints: range: 0-16 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.14 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasControlRedundantTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasControlRedundantTable'
This table contains one row per control module. There is always at least one control module in the system.
Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…
Indexes
| Column | Syntax | OID |
|---|---|---|
| chasControlNumberOfTakeoverThis object is a count of the number of times the control module has changed from primary to secondary mode as a result of a Takeover. Note that this object can be accessed via user interface to either the primary or se… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2.1.1 |
| chasControlDelayedRebootTimerTimer value (in seconds) used to initiate a delayed reboot of the primary or secondary CMM using the certified configuration. Writing this object to a non-zero value results in a CMM reboot following expiration of the … | Unsigned32r/w Constraints: range: 0-31622400 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2.1.2 |
| chasControlDelayedResetAllThis object is used to schedule a delayed reset all action for a chassis when running in virtual chassis mode. If set to -1 - cancel the timer, 0 - reset all immediately, any other value will start counting down the tim… | Integer32r/w Constraints: range: -1-65535 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2.1.3 |
chasChassisTable
table.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3
·
1 row entry
·
25 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasChassisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasChassisTable'
This table contains one row per chassis. There is always at least one chassis or many when running in virtual chassis mode.
Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| chasFreeSlotsThe number of free NI front panel slots. | Unsigned32 Constraints: range: 0-18 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.1 | ||||||||||
| chasPowerLeftThe power still available on the chassis in Watts. | Integer32 Constraints: range: -100000-100000 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.2 | ||||||||||
| chasNumberOfResetsThis object is a count of the number of times this station has been reset since a cold-start. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.3 | ||||||||||
| chasTempRangeTemp Range is the value of the temperature sensor for the chassis. The Temp Range value reflects the temperature of the chassis relative to the Temp Threshold value (i.e., over vs. under the threshold). | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.4 | ||||||||||
| chasTempThresholdThis object is the threshold temperature in degrees Celsius for the chassis. Temp Threshold is the chassis temperature point at which, when reached due to an ascending or descending temperature transition, a temperature… | Integer32r/w Constraints: range: 1-150 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.5 | ||||||||||
| chasDangerTempThresholdThis Threshold is a second one which is hardcoded. When the Chassis Exceeds this value it starts shutting down NIs. This value will be set by the factory and not changeable. | Integer32 Constraints: range: 30-150 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.6 | ||||||||||
| chasPrimaryPhysicalIndexThis value holds the Entity Table Physical Index for the Control Module that is currently primary. This is to allow snmp managers to determine which Control Module is currently primary so it knows what entry in the chas… | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.7 | ||||||||||
| chasCPMAHardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CPMA control module board. This temperature is what is used for comparing to the threshold … | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.8 | ||||||||||
| chasCFMAHardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CFMA fabric board. This temperature is what is used for comparing to the threshold and dete… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.9 | ||||||||||
| chasCPMBHardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CPMB control module board. This temperature is what is used for comparing to the threshold … | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.10 | ||||||||||
| chasCFMBHardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CFMB fabric board. This temperature is what is used for comparing to the threshold and dete… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.11 | ||||||||||
| chasCFMCHardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CFMC fabric board. This temperature is what is used for comparing to the threshold and dete… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.12 | ||||||||||
| chasCFMDHardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CFMD fabric board. This temperature is what is used for comparing to the threshold and dete… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.13 | ||||||||||
| chasFTAHardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for Fantray 1. This temperature is what is used for comparing to the threshold and determining whet… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.14 | ||||||||||
| chasFTBHardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for Fantry 2. This temperature is what is used for comparing to the threshold and determining wheth… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.15 | ||||||||||
| chasNI1HardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 1. This temperature is what is used for comparing to the threshold and det… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.16 | ||||||||||
| chasNI2HardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 2. This temperature is what is used for comparing to the threshold and det… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.17 | ||||||||||
| chasNI3HardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 3. This temperature is what is used for comparing to the threshold and det… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.18 | ||||||||||
| chasNI4HardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 4. This temperature is what is used for comparing to the threshold and det… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.19 | ||||||||||
| chasNI5HardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 5. This temperature is what is used for comparing to the threshold and det… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.20 | ||||||||||
| chasNI6HardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 6. This temperature is what is used for comparing to the threshold and det… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.21 | ||||||||||
| chasNI7HardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 7. This temperature is what is used for comparing to the threshold and det… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.22 | ||||||||||
| chasNI8HardwareBoardTempThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 8. This temperature is what is used for comparing to the threshold and det… | Integer32 Constraints: range: 0-200 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.23 | ||||||||||
| chasPowerSupplyRedundancyThis object indicates the state of power supply redundancy mode. When on(1), N+1 mode redundancy is enabled(default mode). In this mode the system controls the power supplies to maintain efficient use of the power suppl… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.24 | ||||||||||
| chasPowerSupplyRedundancyReserveWhen chasPowerSupplyRedundancyReserve is enabled, N+1 power supply redundancy reserve holds the wattage of one power supply in reserve such that the user cannot insert NIs or configure power over Ethernet (POE) that w… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.25 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4
·
1 row entry
·
8 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasSupervisionRfsLsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasSupervisionRfsLsTable'
This table contains a list of file on the remote chassis per directory.
Information about a remote file.
A row in this table contains a file per directory per chassis
A row in this table contains a file per directory per chassis
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| chasSupervisionRfsLsFileIndexThis value holds file Index for the RFS LS table. | Integer32 Constraints: range: 1-100 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.1 | ||||||||
| chasSupervisionRfsLsSlotCMM Slot where remote file is located. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.2 | ||||||||
| chasSupervisionRfsLsDirNameThe remote directory name where remote file is located in | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-255 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.3 | ||||||||
| chasSupervisionRfsLsFileNameThe file name of remote file | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-33 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.4 | ||||||||
| chasSupervisionRfsLsFileTypeThe Type of a remote file | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.5 | ||||||||
| chasSupervisionRfsLsFileSizesize of this remote file | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.6 | ||||||||
| chasSupervisionRfsLsFileAttrattributes of this remote file | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.7 | ||||||||
| chasSupervisionRfsLsFileDateTimethe modification date and time of a remote file | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-16 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.8 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.6
·
1 row entry
·
2 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasControlReloadStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasControlReloadStatusTable'
Table containing reload status of each network interface slot or stack module
Entry of a network interface reload status
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| chasControlReloadIndexThe index (entPhsycialIndex) value of the network interface. | Integer32 Constraints: range: 1-64 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.6.1.1 | ||||||||
| chasControlReloadStatusReturned value indicates if the network interface module is enabled or disabled for reload. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.6.1.2 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasSupervisionRfsDfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasSupervisionRfsDfTable'
This table contains information about file system size and use.
This entry contains information about file system size and use.
Indexes
| Column | Syntax | OID |
|---|---|---|
| chasSupervisionRfsDfSlotCMM Slot where flash space is evaluated. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.1 |
| chasSupervisionRfsDfFlashFreeNumber bytes free on the file system. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.2 |
| chasSupervisionRfsDfFlashSizeNumber of total bytes on the file system. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.3 |
| chasSupervisionRfsDfUsbFreeThe amount of free space on the USB file system. | kbSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.4 |
| chasSupervisionRfsDfUsbSizeThe total amount of space on the USB file system. | kbSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.5 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasSupervisionFlashMemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasSupervisionFlashMemTable'
This table contains the systems flash memory information.
This contains one entry for the flash memory table.
Indexes
| Column | Syntax | OID |
|---|---|---|
| chasSupervisionSlotCMM Slot where flash space is evaluated. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1.1 |
| chasSupervisionFlashSizeFlash memory size. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1.2 |
| chasSupervisionFlashFreeNumber bytes free on file system. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1.3 |
| chasSupervisionFlashUsedA rounded up percentage of Flash Memory used. | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1.4 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.10
·
1 row entry
·
2 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk chasSupervisionCmmCertifiedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::chasSupervisionCmmCertifiedTable'
This table contains certification status
Information about control module certification status. This class is
instanciated only when running in virtual chassis mode.
instanciated only when running in virtual chassis mode.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| chasSupervisionCmmNumCMM Slot where /certified directory is evaluated. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.10.1.1 | ||||||
| chasSupervisionCmmCertifiedStatusThe status of the CMM certified directory - certified or not. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.10.1.2 |
alaChasEntPhysFanTable
table.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaChasEntPhysFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::alaChasEntPhysFanTable'
This table contains one row per physical fan entity.
Information about a particular fan in a chassis physical entity.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| alaChasEntPhysFanLocalIndexIndex to a chassis fan entity | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1.1 | ||||||
| alaChasEntPhysFanStatusChassis fan operational status | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1.2 | ||||||
| alaChasEntPhysFanAirflowChassis fan airflow direction | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1.3 | ||||||
| alaChasEntPhysFanSpeedChassis fan speed. | rpmSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1.4 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaChasBpsFwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::alaChasBpsFwTable'
This table contains one row per shelf bps firrmware
Information about a bps firrmare
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
alaChasBpsShelfIddeprecated Bps shelf ID | AlaChasBpsShelfId Type Constraints: range: 1..3Description: BPS shelf Id . | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.1 | ||||
alaChasBpsUpdateFirmwaredeprecated This object is used to start BPS firmware update. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.2 | ||||
alaChasBpsCpldRevdeprecated This object contains the CPLD revision Number of the BPS | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.3 | ||||
alaChasBpsMmcuRevdeprecated This object contains the MMCU revision Number of the BPS | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.4 | ||||
alaChasBpsCmcuRevdeprecated This object contains the CMCU revision Number of the BPS | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.5 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaChasBpsConnectorPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::alaChasBpsConnectorPriorityTable'
This table contains BPS connector priority for each slot
Information about bps connector priority for each slot
Indexes
| Column | Syntax | OID |
|---|---|---|
alaChasBpsChassisIddeprecated Numbers allocated for the stack NIs as follows:- 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.1 |
alaChasBpsConnectorShelfIddeprecated Bps shelf ID | AlaChasBpsShelfId Type Constraints: range: 1..3Description: BPS shelf Id . | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.2 |
alaChasBpsConnectorPrioritydeprecated This object specifies the bps connector priority. | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.3 |
alaChasBpsConnectorNumdeprecated This object specifies the bps connector num. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.4 |
alaChasBpsSerialNumdeprecated This object specifies the bps serial num. | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-14 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.5 |
alaChasBpsModeTable
table.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.3
·
1 row entry
·
1 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaChasBpsModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::alaChasBpsModeTable'
This table contains one row for bps config parameters.
Information about bps mode
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| alaChasBpsModeThis object is only applicable to BPS .Value is used to specify current Mode of switch. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.3.1.1 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4
·
1 row entry
·
11 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaChasBpsPowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::alaChasBpsPowerSupplyTable'
This table contains BPS power supplies details
Information about a particular BPS power supply
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
alaChasBpsPowerSupplyShelfIddeprecated BPS shelf ID | AlaChasBpsShelfId Type Constraints: range: 1..3Description: BPS shelf Id . | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.1 | ||||||
alaChasBpsPowerSupplyIndexdeprecated This value hold BPS power power supply Index | Integer32 Constraints: range: 1-6 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.2 | ||||||
alaChasBpsPowerSupplyNamedeprecated This object hold name of BPS power supply | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-63 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.3 | ||||||
alaChasBpsPowerSupplyDescrdeprecated This object hold description of BPS power supply | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-63 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.4 | ||||||
alaChasBpsPowerSupplyModuleTypedeprecated This object is unique module Type or ID from BPS entities eeprom | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-31 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.5 | ||||||
alaChasBpsPowerSupplyPartNumberdeprecated This object contains the BPS power supply Part Number | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-16 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.6 | ||||||
alaChasBpsPowerSupplyHardwareRevdeprecated The vendor-specific hardware revision string for theBPS power supplies Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a… | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-8 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.7 | ||||||
alaChasBpsPowerSupplySerialNumdeprecated The vendor-specific serial number string for theBPS power supplies | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-32 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.8 | ||||||
alaChasBpsPowerSupplyMfgDatedeprecated This object contains the manufacturing date of the BPS power supplies .Its format is mmm dd yyyy : NOV 27 2012. | SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-11 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.9 | ||||||
alaChasBpsPowerSupplyOperStatusdeprecated Oper status of BPS power supply | Enumeration Enumerated Values:
| .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.10 | ||||||
alaChasBpsPowerSupplyPowerProvdeprecated It corresponds to max power of BPS power supply.This value is in Watts. | Integer32 Constraints: range: 0-2000 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.11 |
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaChasBpsTotalPowerAllocTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-CHASSIS-MIB::alaChasBpsTotalPowerAllocTable'
This table contains one row for parameters which reflect total allocation by BPS .
Information about various bps config parameters
Indexes
| Column | Syntax | OID |
|---|---|---|
alaChasBpsSysTotalAvailablePowerdeprecated This value is only applicable to the BPS Module. Itcorresponds to system total power available on BPS This value is in Watts. | Integer32 Constraints: range: 0-900 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1.1 |
alaChasBpsSysTotalAllocationdeprecated This value is only applicable to the BPS Modules. Itcorresponds to total system power allocated by BPS This value is in Watts. | Integer32 Constraints: range: 0-900 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1.2 |
alaChasBpsPoeTotalAvailablePowerdeprecated This value is only applicable to the BPS Modules. Itcorresponds to system total power available on BPS This value is in Watts. | Integer32 Constraints: range: 0-6000 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1.3 |
alaChasBpsPoeTotalAllocationdeprecated This value is only applicable to the Bps Modules. Itcorresponds to total POE power allocated by BPS This value is in Watts. | Integer32 Constraints: range: 0-6000 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1.4 |