AH_TRAP_MIB

        This is the MIB module for access point trap definitions 
for Aerohive Networks Inc.

Imported Objects

ahAPTrap, AhString, AhNodeID, AhMACProtocolAH-SMI-MIB
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPESNMPv2-SMI
DisplayStringSNMPv2-TC

Type Definitions (2)

Name Base Type Values/Constraints
AhProbableCauseahClear(0), ahUnknown(1), ahFlashFailure(2), ahFanFailure(3), ahPowerSupplyFailure(4), ahSoftwareUpgradeFailure(5), ahRadioFailure(6), ahConfFailure(7)
AhStateahUp(1), ahDown(2)

Objects

ahTrapModule .1.3.6.1.4.1.26928.1.1.1.1.1
ahNotificationVarBind .1.3.6.1.4.1.26928.1.1.1.1.2
ahAPId
.1.3.6.1.4.1.26928.1.1.1.1.2.1
ahCurrentState .1.3.6.1.4.1.26928.1.1.1.1.2.10
ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.2.11
ahCode .1.3.6.1.4.1.26928.1.1.1.1.2.12
ahIfIndex .1.3.6.1.4.1.26928.1.1.1.1.2.13
ahObjectType .1.3.6.1.4.1.26928.1.1.1.1.2.14
ahRemoteId
.1.3.6.1.4.1.26928.1.1.1.1.2.15
ahIDPType .1.3.6.1.4.1.26928.1.1.1.1.2.16
ahIDPChannel .1.3.6.1.4.1.26928.1.1.1.1.2.17
ahIDPRSSI .1.3.6.1.4.1.26928.1.1.1.1.2.18
ahIDPCompliance .1.3.6.1.4.1.26928.1.1.1.1.2.19
ahAPName
.1.3.6.1.4.1.26928.1.1.1.1.2.2
ahSSID .1.3.6.1.4.1.26928.1.1.1.1.2.20
ahStationType .1.3.6.1.4.1.26928.1.1.1.1.2.21
ahIDPStationData .1.3.6.1.4.1.26928.1.1.1.1.2.22
ahRemoved .1.3.6.1.4.1.26928.1.1.1.1.2.23
ahClientMAC
.1.3.6.1.4.1.26928.1.1.1.1.2.24
ahCLientIP
.1.3.6.1.4.1.26928.1.1.1.1.2.25
ahClientHostName
.1.3.6.1.4.1.26928.1.1.1.1.2.26
ahClientUserName
.1.3.6.1.4.1.26928.1.1.1.1.2.27
ahPowerSrc .1.3.6.1.4.1.26928.1.1.1.1.2.28
ahPoEEth0On .1.3.6.1.4.1.26928.1.1.1.1.2.29
ahSeverity .1.3.6.1.4.1.26928.1.1.1.1.2.3
ahPoEEth0Pwr .1.3.6.1.4.1.26928.1.1.1.1.2.30
ahPoEEth1On .1.3.6.1.4.1.26928.1.1.1.1.2.31
ahPoEEth1Pwr .1.3.6.1.4.1.26928.1.1.1.1.2.32
ahRadioChannel .1.3.6.1.4.1.26928.1.1.1.1.2.33
ahRadioTxPower .1.3.6.1.4.1.26928.1.1.1.1.2.34
ahClientAuthMethod .1.3.6.1.4.1.26928.1.1.1.1.2.35
ahClientEncryptionMethod .1.3.6.1.4.1.26928.1.1.1.1.2.36
ahClientMACProtocol
.1.3.6.1.4.1.26928.1.1.1.1.2.37
ahClientVLAN .1.3.6.1.4.1.26928.1.1.1.1.2.38
ahClientUserProfId .1.3.6.1.4.1.26928.1.1.1.1.2.39
ahObjectName .1.3.6.1.4.1.26928.1.1.1.1.2.4
ahClientChannel .1.3.6.1.4.1.26928.1.1.1.1.2.40
ahClientCWPUsed .1.3.6.1.4.1.26928.1.1.1.1.2.41
ahBSSID
.1.3.6.1.4.1.26928.1.1.1.1.2.42
ahPoEEth0MaxSpeed .1.3.6.1.4.1.26928.1.1.1.1.2.43
ahPoEEth1MaxSpeed .1.3.6.1.4.1.26928.1.1.1.1.2.44
ahPoEWifi0Setting .1.3.6.1.4.1.26928.1.1.1.1.2.45
ahPoEWifi1Setting .1.3.6.1.4.1.26928.1.1.1.1.2.46
ahPoEWifi2Setting .1.3.6.1.4.1.26928.1.1.1.1.2.47
ahAssociationTime
.1.3.6.1.4.1.26928.1.1.1.1.2.48
ahIDPInNet .1.3.6.1.4.1.26928.1.1.1.1.2.49
ahProbableCause .1.3.6.1.4.1.26928.1.1.1.1.2.5
ahDiscoverAge
.1.3.6.1.4.1.26928.1.1.1.1.2.50
ahUpdateAge
.1.3.6.1.4.1.26928.1.1.1.1.2.51
ahRunningAverageInterference .1.3.6.1.4.1.26928.1.1.1.1.2.52
ahShortTermInterference .1.3.6.1.4.1.26928.1.1.1.1.2.53
ahSnapshotInterference .1.3.6.1.4.1.26928.1.1.1.1.2.54
ahFailureSet .1.3.6.1.4.1.26928.1.1.1.1.2.55
ahInterferenceThreshold .1.3.6.1.4.1.26928.1.1.1.1.2.56
ahCRCErrRateThreshold .1.3.6.1.4.1.26928.1.1.1.1.2.57
ahCRCErrRate .1.3.6.1.4.1.26928.1.1.1.1.2.58
ahBandwidthSentinelStatus .1.3.6.1.4.1.26928.1.1.1.1.2.59
ahCurValue .1.3.6.1.4.1.26928.1.1.1.1.2.6
ahGuaranteedBandwidth .1.3.6.1.4.1.26928.1.1.1.1.2.60
ahActualBandwidth .1.3.6.1.4.1.26928.1.1.1.1.2.61
ahBandwidthSentinelAction
.1.3.6.1.4.1.26928.1.1.1.1.2.62
ahBeaconInterval
.1.3.6.1.4.1.26928.1.1.1.1.2.63
ahLevel .1.3.6.1.4.1.26928.1.1.1.1.2.64
ahAlarmAlertType .1.3.6.1.4.1.26928.1.1.1.1.2.65
ahThresholdValue .1.3.6.1.4.1.26928.1.1.1.1.2.66
ahShortTermValue .1.3.6.1.4.1.26928.1.1.1.1.2.67
ahSnapshotValue .1.3.6.1.4.1.26928.1.1.1.1.2.68
ahIfName
.1.3.6.1.4.1.26928.1.1.1.1.2.69
ahThresholdHigh .1.3.6.1.4.1.26928.1.1.1.1.2.7
ahThresholdLow .1.3.6.1.4.1.26928.1.1.1.1.2.8
ahPreviousState .1.3.6.1.4.1.26928.1.1.1.1.2.9

Notifications/Traps

NameOIDDescription
ahFailureTrap.1.3.6.1.4.1.26928.1.1.1.1.1.1
This event is generated for any equipment or software failures.
ahInterferenceMapAlertEvent.1.3.6.1.4.1.26928.1.1.1.1.1.10
For every one minute interval, AP will monitor the interference channel utilizations
(snapshot, short term means average and running average) and CRC error rate 
against their thresholds, if any one of them is above their threshold 
(thresholds are settable by CLI), AP should send HM an interference alert event to HM.
AP will send out clear alert to HM only when: the last short term period��s CRC_error_rate,
means average Interference CU and the last snapshot interference CU are all below their thresholds.
ahBandwidthSentinelEvent.1.3.6.1.4.1.26928.1.1.1.1.1.11
HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
The ��alert�� trap will serve the purpose to tell HM that the client is violating the bandwidth sentinel,
the ��clear�� trap will clear the previous ��alert�� trap.
ahAlarmMsgMapAlertEvent.1.3.6.1.4.1.26928.1.1.1.1.1.12
HiveOS will send two different kinds of level alert: interface level alert, and client level alert.
There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; interface level includes all alert type, 
the client level includes Tx drop/retry rate, Rx drop Rate; the 'set' alert means there is an alert raised, 
with type indicated in the alert type field, the 'clear' alert means the previous alert condition has been cleared.
ahThresholdCrossingEvent.1.3.6.1.4.1.26928.1.1.1.1.1.2
This event is generated whenever a threshold is crossed for the first time.
ahStateChangeEvent.1.3.6.1.4.1.26928.1.1.1.1.1.3
This event is generated whenever an object state change occurs.
ahConnectionChangeEvent.1.3.6.1.4.1.26928.1.1.1.1.1.4
This event is generated whenever a connection state change
occurs. The connection might be between a HiveAP and its client,
or between a HiveAP and a neighboring HiveAP.
ahIDPStationEvent.1.3.6.1.4.1.26928.1.1.1.1.1.5
This event is generated whenever IDP detects an AP 
in its neighborhood. The ahRomoteId indicates the detected AP
MAC address, and the ahIDPCompliance indicates conformance of
IDP policy this AP satisfies. The ahIDPChannel and ahIDPRSSI
indicates the radio channel and Receive Signal Strenth Indication.
ahClientInfoEvent.1.3.6.1.4.1.26928.1.1.1.1.1.6
This event is generated whenever HiveAP a new client 
makes an association and its IP address, hostname, and
User name is obtained.
ahPoEEvent.1.3.6.1.4.1.26928.1.1.1.1.1.7
This event is generated whenever a HiveAP (802.11n 
product line) boots up or changes power levels.
ahChannelPowerChangeEvent.1.3.6.1.4.1.26928.1.1.1.1.1.8
This event is generated whenever a HiveAP boots up, 
or changes channels or power levels.
ahIDPMitigateEvent.1.3.6.1.4.1.26928.1.1.1.1.1.9
This event is generated whenever IDP detects an rogue client
connect to a rogue AP. The ahRomoteId indicates the detected 
Station MAC address.