ADTRAN-GENSHAPER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
11
adGenShaperProvTable
table
.1.3.6.1.4.1.664.5.70.19.1.1
·
1 row entry
·
9 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenShaperProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENSHAPER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENSHAPER-MIB::adGenShaperProvTable'
The Shaper provisioning table.
An entry in the Shaper provisioning table. Shaper entries
are uniquely identified by their name and slot.
are uniquely identified by their name and slot.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
A user configurable name for the Shaper. Upon creation of the Shaper,
the associated name will default to a unique value. |
OctetString Constraints: range: 1-50 |
.1.3.6.1.4.1.664.5.70.19.1.1.1.1 |
||||||||||||
|
This object is used to create a new row or modify or delete an
existing row in the Shaper table. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.664.5.70.19.1.1.1.2 |
||||||||||||
|
Returns the current operational status of the Shaper.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.19.1.1.1.3 |
||||||||||||
|
This variable provides the Shaper status. If there is no error, the Shaper
status will be 'running'. If there is an error and the Shaper cannot be applied, then adGenShaperProvOperStatusDetail will provide more detail… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.70.19.1.1.1.4 |
||||||||||||
|
This string describes the last error experienced
for this particular entry in the table. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.70.19.1.1.1.5 |
||||||||||||
|
This variable specifies where the shaper is applied. This value will determine which
combination of objects will be used to identify where the shaper is applied. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.19.1.1.1.6 |
||||||||||||
|
This variable specifies the shaper rate in kbps. The range supported
is determined by the interface the shaper is connected to. The minimum shaper rate is 1kbps and the maximum is the line rate of the interface. |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.664.5.70.19.1.1.1.7 |
||||||||||||
|
Specifies the Layer 2 Ethernet interface the shaper is applied to. A value of
zero means this interface has not been set. |
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.664.5.70.19.1.1.1.8 |
||||||||||||
|
This variable configures the Burst Size in bytes for the shaper. The burst
size specifies the number of consecutive bytes allowed to egress at the interface rate when no packets have been sent for some time. |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.664.5.70.19.1.1.1.9 |
adGenShaperSlotTable
table.1.3.6.1.4.1.664.5.70.19.1.2
·
1 row entry
·
1 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenShaperSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENSHAPER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENSHAPER-MIB::adGenShaperSlotTable'
The Shaper provisioning table.
An entry in the Shaper slot table. These items are applicable to the device
and not to an individual shaper.
and not to an individual shaper.
| Column | Syntax | OID |
|---|---|---|
|
If creation of a shaper fails. This string will be used to return the
reason for failure. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.70.19.1.2.1.1 |
.1.3.6.1.4.1.664.5.70.19.1.3
·
1 row entry
·
1 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenShaperLookupPerInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENSHAPER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENSHAPER-MIB::adGenShaperLookupPerInterfaceTable'
The Shaper lookup per interface table.
An entry in the Shaper lookup per interface table. This table will only contain entries
for those interface that are connected to a shaper that is applied perInterface(2).
for those interface that are connected to a shaper that is applied perInterface(2).
| Column | Syntax | OID |
|---|---|---|
|
If the selected interface is connected to a shaper that is applied perInterface(2), this
object will contain the name of the shaper. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.70.19.1.3.1.1 |