ADTRAN-GENMUXPONDER-MIB Table View

ADTRAN-SHARED-CND-SYSTEM-TC-MIBGenSystemInterfaceTyper/w

Column Syntax OID

adGenMuxPPhysIfType

Control for setting the physical interface type. The intial
release of the Muxponder cards will only support the retrieval of
this OID to determine the Interface type of a particular port. In
future releases some muxp…

Type Values:

1	unknown
2	ds1
3	dsx1
4	e1
5	dsxE1
6	gigabitEthernet
7	ds3
8	portChannel
9	tenGigabitEthernet
10	erps
11	shdsl
12	adsl
13	vdsl
14	efmGroup
15	efmLink
16	efmPort
17	lagGroup
18	pppGroup
19	imaGroup
20	imaLink
21	atm
22	fxs
23	hdsl2
24	hdsl4
25	adsl2
26	vdsl2
27	ethernet
28	fast
29	interleave
30	hdsl
31	gpon
32	ipHost
33	frpvc
34	sonet
35	otn
36	wan
37	defaultEthernet
38	genericBridge
39	fibreChannel
40	otnTenGigabitEthernet
41	hundredGigabitEthernet
42	otnHundredGigabitEthernet
43	xgigabitEthernet

.1.3.6.1.4.1.664.5.70.26.1.1.1.1

adGenMuxPPeerIpAddressdeprecated

This variable is used to indicate the IP address of the peer device
connected to the interface.

This object is deprecated. Use OID adGenPeerAdjacencyLogicalIpAddress
from ADTRAN-GENERIC-PEER-ADJACENCY-MIB…

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.664.5.70.26.1.1.1.2

adGenMuxPPeerChassisIddeprecated

This string is used to specify the chassis name of the peer device
connected to the interface. It is recommended to use the peer device
TID as the chassis name.

This object is deprecated. Use OID adGenPee…

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.1.1.1.3

adGenMuxPPeerPortIddeprecated

This string is used to specify the port identification of the peer
device connected to the interface. It is recommended to specify the
interface type of the peer port along with the shelf/slot/port
information for the p…

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.1.1.1.4

adGenMuxPFacilityLoopbackEnable

Enables/disables a facility loopback on the indexed port interface.

adGenMuxPFacilityLoopbackTimeout

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.1.1.1.5

Used to specify a length of time in minutes before the facility loopback is
automatically removed.

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.664.5.70.26.1.1.1.6

adGenMuxPFacilityLoopbackTimeRemaining

Used to indicate the time remaining before the facility loopback is
automatically removed.
Format of string: hh:mm:ss

adGenMuxPTerminalLoopbackEnable

Constraints:
range: 1-8

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.1.1.1.7

Enables/disables a terminal loopback on the indexed port interface.

adGenMuxPTerminalLoopbackTimeout

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.1.1.1.8

Used to specify a length of time in minutes before the terminal loopback is
automatically removed.

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.664.5.70.26.1.1.1.9

adGenMuxPTerminalLoopbackTimeRemaining

Used to indicate the time remaining before the terminal loopback is
automatically removed.
Format of string: hh:mm:ss

Constraints:
range: 1-8

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.1.1.1.10

adGenMuxPYCableEnable

Used to enable or disable the YCable support.

adGenMuxPProtectedPairEnable

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.1.1.1.11

Used to enable or disable the use of a protected-pair to provide protection between a pair of interfaces.

adGenMuxPForwardingGroupLimitedEnable

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.1.1.1.12

Setting this value to True adds this port to a group of ports that are limited with respect to port forwarding.
Ports within the limited forwarding group are not allowed to forward data to other ports in the group but m…

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPCrossConnectName

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.1.1.1.13

adGenMuxPCrossConnectTable

table

.1.3.6.1.4.1.664.5.70.26.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPCrossConnectTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPCrossConnectTable'

The Muxponder Cross-Connect table.

adGenMuxPCrossConnectEntry row .1.3.6.1.4.1.664.5.70.26.2.1.1

An entry in the Muxponder Cross-Connect table.

Indexes

Column Syntax OID

adGenMuxPCrossConnectName

Cross-Connect name.

adGenMuxPCrossConnectType

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.2.1.1.1

Cross-Connect type.

Enumerationr/w

Enumerated Values:

1	twoWay
2	oneWay

.1.3.6.1.4.1.664.5.70.26.2.1.1.2

adGenMuxPCrossConnectSrcType

This is used to indicate the payload type of the source
endpoint.

adGenMuxPCrossConnectSrcIfIndex

Type Values:

1	notApplicable
2	sts1
3	sts3c
4	sts12c
5	sts48c
6	sts192c
7	sonetLine
8	vc3
9	vc4
10	vc4x4c
11	vc4x16c
12	vc4x64c
13	sdhLine
14	otnPort
15	odu4
16	odu3
17	odu3e1
18	odu3e2
19	odu2
20	odu2e
21	odu2f
22	odu1e
23	odu1f
24	odu1
25	odu0
26	oduflex
27	timeslot
28	gigabitEthernet
29	tenGigabitEthernet
30	fibreChannel1G
31	fibreChannel2G
32	fibreChannel4G
33	fibreChannel8G
34	fibreChannel10G

Description:

Possible payload types for muxponders.

.1.3.6.1.4.1.664.5.70.26.2.1.1.3

The IfIndex of the source endpoint.

adGenMuxPCrossConnectDstType

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.664.5.70.26.2.1.1.4

This is used to indicate the payload type of the destination
endpoint.

MuxPPayloadTypesr/w

Type Values:

1	notApplicable
2	sts1
3	sts3c
4	sts12c
5	sts48c
6	sts192c
7	sonetLine
8	vc3
9	vc4
10	vc4x4c
11	vc4x16c
12	vc4x64c
13	sdhLine
14	otnPort
15	odu4
16	odu3
17	odu3e1
18	odu3e2
19	odu2
20	odu2e
21	odu2f
22	odu1e
23	odu1f
24	odu1
25	odu0
26	oduflex
27	timeslot
28	gigabitEthernet
29	tenGigabitEthernet
30	fibreChannel1G
31	fibreChannel2G
32	fibreChannel4G
33	fibreChannel8G
34	fibreChannel10G

Description:

Possible payload types for muxponders.

.1.3.6.1.4.1.664.5.70.26.2.1.1.5

adGenMuxPCrossConnectDstIfIndex

The IfIndex of the destination endpoint.

adGenMuxPCrossConnectRowStatus

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.2.1.1.6

Cross-Connect Row Status.

adGenMuxPCrossConnectLastProvError

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.664.5.70.26.2.1.1.7

This string describes the last error experienced
for this particular entry in the table.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.2.1.1.8

adGenMuxPCrossConnectLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.2.2 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPCrossConnectLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPCrossConnectLastCreateErrorTable'

The Muxponder Cross-Connect last create error table.
Table that indicates the last error that occurred
during creation of a cross-connect.

adGenMuxPCrossConnectLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.2.2.1

An entry in the Muxponder Cross-Connect Last Create Error table.

Indexes

IF-MIBifIndex adGenMuxPPortCrossConnectName

Column	Syntax	OID
adGenMuxPCrossConnectLastCreateError The last error that occurred during the creation of a cross-connect.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.2.2.1.1`

adGenMuxPPortCrossConnectStatusTable

table

.1.3.6.1.4.1.664.5.70.26.2.3 · 1 row entry · 2 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPPortCrossConnectStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPPortCrossConnectStatusTable'

The Muxponder Port Cross-Connect Status table.

adGenMuxPPortCrossConnectStatusEntry row .1.3.6.1.4.1.664.5.70.26.2.3.1

An entry in the Muxponder Port Cross-Connect Status table.

Indexes

Column Syntax OID

adGenMuxPPortCrossConnectName

Cross-Connect name.

adGenMuxPPortCrossConnectStatus

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.2.3.1.1

This OID indicates whether this port is defined as a source, destination or both for
this cross-connect.

Enumeration

Enumerated Values:

1	source
2	destination
3	sourceAndDestination

.1.3.6.1.4.1.664.5.70.26.2.3.1.2

adGenMuxPProtGroupTable

table

.1.3.6.1.4.1.664.5.70.26.3.1 · 1 row entry · 27 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPProtGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPProtGroupTable'

The Muxponder Protection Group table.  This table is used
to create protection groups out of two interfaces.

adGenMuxPProtGroupEntry row .1.3.6.1.4.1.664.5.70.26.3.1.1

An entry in the Muxponder Protection Group table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPProtGroupName

Column Syntax OID

adGenMuxPProtGroupName

Protection Group name.

adGenMuxPProtGroupWorkingType

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.3.1.1.1

adGenMuxPProtGroupType

Protection Group type.

Enumerationr/w

Enumerated Values:

1	upsr
2	terminalUniDir
3	terminalBiDir
4	yCable

.1.3.6.1.4.1.664.5.70.26.3.1.1.2

This is used to indicate the payload type of the working
entity.

adGenMuxPProtGroupWorkingIfIndex

Type Values:

1	notApplicable
2	sts1
3	sts3c
4	sts12c
5	sts48c
6	sts192c
7	sonetLine
8	vc3
9	vc4
10	vc4x4c
11	vc4x16c
12	vc4x64c
13	sdhLine
14	otnPort
15	odu4
16	odu3
17	odu3e1
18	odu3e2
19	odu2
20	odu2e
21	odu2f
22	odu1e
23	odu1f
24	odu1
25	odu0
26	oduflex
27	timeslot
28	gigabitEthernet
29	tenGigabitEthernet
30	fibreChannel1G
31	fibreChannel2G
32	fibreChannel4G
33	fibreChannel8G
34	fibreChannel10G

Description:

Possible payload types for muxponders.

.1.3.6.1.4.1.664.5.70.26.3.1.1.3

The IfIndex of the working entity.

adGenMuxPProtGroupProtectingType

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.3.1.1.4

This is used to indicate the payload type of the protecting
entity.

MuxPPayloadTypesr/w

Type Values:

1	notApplicable
2	sts1
3	sts3c
4	sts12c
5	sts48c
6	sts192c
7	sonetLine
8	vc3
9	vc4
10	vc4x4c
11	vc4x16c
12	vc4x64c
13	sdhLine
14	otnPort
15	odu4
16	odu3
17	odu3e1
18	odu3e2
19	odu2
20	odu2e
21	odu2f
22	odu1e
23	odu1f
24	odu1
25	odu0
26	oduflex
27	timeslot
28	gigabitEthernet
29	tenGigabitEthernet
30	fibreChannel1G
31	fibreChannel2G
32	fibreChannel4G
33	fibreChannel8G
34	fibreChannel10G

Description:

Possible payload types for muxponders.

.1.3.6.1.4.1.664.5.70.26.3.1.1.5

adGenMuxPProtGroupProtectingIfIndex

The IfIndex of the protecting entity.

adGenMuxPProtGroupRowStatus

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.3.1.1.6

Protection Group Row Status.

adGenMuxPProtGroupLastProvError

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.3.1.1.7

This string describes the last error experienced
for this particular entry in the table.

adGenMuxPProtGroupWorkIsOnline

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.3.1.1.8

Indicates whether or not the working-entity is online. If not,
the protect-entity is online.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.3.1.1.9

adGenMuxPProtGroupSwitchCommands

Protection Group Switch Commands.

Enumerationr/w

Enumerated Values:

1	clear
2	manualSwitchToWork
3	manualSwitchToProt
4	forceSwitchToWork
5	forceSwitchToProt
6	lockout

.1.3.6.1.4.1.664.5.70.26.3.1.1.10

adGenMuxPProtGroupWorkEntityStatus

Working Entity Signal Status.

Enumeration

Enumerated Values:

1	clear
2	signalFaulty
3	signalDegraded
4	down

.1.3.6.1.4.1.664.5.70.26.3.1.1.11

adGenMuxPProtGroupProtectEntityStatus

Protect Entity Signal Status.

Enumeration

Enumerated Values:

1	clear
2	signalFaulty
3	signalDegraded
4	down

.1.3.6.1.4.1.664.5.70.26.3.1.1.12

adGenMuxPProtGroupRevertiveEnable

Enables/disables revertive switching for this protection group.

adGenMuxPProtGroupWaitToRestoreTime

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.3.1.1.13

Wait to restore time(in minutes).

Integer32r/w

Constraints:
range: 1-20

.1.3.6.1.4.1.664.5.70.26.3.1.1.14

adGenMuxPProtGroupTxK1Request

Transmit K1 byte Request.

Enumeration

Enumerated Values:

1	notAvailable
2	noRequest
3	doNotRevert
4	reverseRequest
5	waitToRestore
6	manualSwitch
7	signalDegrade
8	signalFail
9	forceSwitch
10	lockout
11	reserved
12	notSupported

.1.3.6.1.4.1.664.5.70.26.3.1.1.15

adGenMuxPProtGroupTxK1RequestChannel

Transmit K1 byte Request Channel.

Enumeration

Enumerated Values:

1	notAvailable
2	protect
3	working
4	invalid

.1.3.6.1.4.1.664.5.70.26.3.1.1.16

adGenMuxPProtGroupTxK2BridgeChannel

Transmit K2 byte Bridge Channel.

Enumeration

Enumerated Values:

1	notAvailable
2	protect
3	working
4	invalid

.1.3.6.1.4.1.664.5.70.26.3.1.1.17

adGenMuxPProtGroupTxK2APSArchitecture

Transmit K2 byte APS Architecture.

Enumeration

Enumerated Values:

1	notAvailable
2	notProtected
3	onePlusOne
4	oneToOne

.1.3.6.1.4.1.664.5.70.26.3.1.1.18

adGenMuxPProtGroupTxK2APSMode

Transmit K2 byte APS Mode.

Enumeration

Enumerated Values:

1	notAvailable
2	unidirectional
3	bidirectional
4	aisL
5	rdiL
6	msAis
7	msRdi
8	reserved

.1.3.6.1.4.1.664.5.70.26.3.1.1.19

adGenMuxPProtGroupRxK1Request

Receive K1 byte Request. If notAvailable is returned, then the following OIDs are not valid:
adGenMuxPProtGroupRxK1RequestChannel, adGenMuxPProtGroupRxK2BridgeChannel,
adGenMuxPProtGroupRxK2APSArchitecture, and adGenMu…

Enumeration

Enumerated Values:

1	notAvailable
2	noRequest
3	doNotRevert
4	reverseRequest
5	waitToRestore
6	manualSwitch
7	signalDegrade
8	signalFail
9	forceSwitch
10	lockout
11	reserved
12	notSupported

.1.3.6.1.4.1.664.5.70.26.3.1.1.20

adGenMuxPProtGroupRxK1RequestChannel

Receive K1 byte Request Channel.

Enumeration

Enumerated Values:

1	notAvailable
2	protect
3	working
4	invalid

.1.3.6.1.4.1.664.5.70.26.3.1.1.21

adGenMuxPProtGroupRxK2BridgeChannel

Receive K2 byte Bridge Channel.

Enumeration

Enumerated Values:

1	notAvailable
2	protect
3	working
4	invalid

.1.3.6.1.4.1.664.5.70.26.3.1.1.22

adGenMuxPProtGroupRxK2APSArchitecture

Receive K2 byte APS Architecture.

Enumeration

Enumerated Values:

1	notAvailable
2	notProtected
3	onePlusOne
4	oneToOne

.1.3.6.1.4.1.664.5.70.26.3.1.1.23

adGenMuxPProtGroupRxK2APSMode

Receive K2 byte APS Mode.

Enumeration

Enumerated Values:

1	notAvailable
2	unidirectional
3	bidirectional
4	aisL
5	rdiL
6	msAis
7	msRdi
8	reserved

.1.3.6.1.4.1.664.5.70.26.3.1.1.24

adGenMuxPProtGroupOperStatus

Operational Status of the Protection Group. This operational status
indicates whether or not the provisioning necessary for protection switching
to function properly has been adequately provisioned. It is not affected…

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.3.1.1.25

adGenMuxPProtGroupStatusString

The status string for the protection group. Indicates
why the protection group is down. If protection group is up,
then a blank string will be returned.

adGenMuxPProtGroupWaitToRestoreRemainingTime

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.3.1.1.26

The remaining time(in seconds) to restore the entity when wait to restore is enabled.

secondsUnsigned32

Constraints:
range: 0-1200

.1.3.6.1.4.1.664.5.70.26.3.1.1.27

adGenMuxPProtGroupLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.3.2 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPProtGroupLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPProtGroupLastCreateErrorTable'

The Muxponder Protection Group Last Create Error table.
This table is used to indicate the last error that occurred
during creation of a protection group.

adGenMuxPProtGroupLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.3.2.1

An entry in the Muxponder Protection Group Last Create Error table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPEthernetProtGroupName

Column	Syntax	OID
adGenMuxPProtGroupLastCreateError The last error that occurred during the creation of a protection group.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.3.2.1.1`

adGenMuxPEthernetProtGroupTable

table

.1.3.6.1.4.1.664.5.70.26.3.3 · 1 row entry · 17 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPEthernetProtGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPEthernetProtGroupTable'

The Ethernet Protection Group table.  This table is used
to create protection groups between two Ethernet interfaces.

adGenMuxPEthernetProtGroupEntry row .1.3.6.1.4.1.664.5.70.26.3.3.1

An entry in the Ethernet Protection Group table.

Indexes

Column Syntax OID

adGenMuxPEthernetProtGroupName

Protection Group name.

adGenMuxPEthernetProtGroupType

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.3.3.1.1

Protection Group type.

Enumerationr/w

Enumerated Values:

yCable

.1.3.6.1.4.1.664.5.70.26.3.3.1.2

adGenMuxPEthernetProtGroupWorkingType

The payload type of the working entity.

adGenMuxPEthernetProtGroupWorkingIfIndex

Type Values:

1	notCompatible
2	gigabitEthernet
3	tenGigabitEthernet

Description:

Possible payload types for Ethernet.

.1.3.6.1.4.1.664.5.70.26.3.3.1.3

The IfIndex of the working entity.

adGenMuxPEthernetProtGroupProtectingType

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.3.3.1.4

The payload type of the protecting entity.

adGenMuxPEthernetProtGroupProtectingIfIndex

Type Values:

1	notCompatible
2	gigabitEthernet
3	tenGigabitEthernet

Description:

Possible payload types for Ethernet.

.1.3.6.1.4.1.664.5.70.26.3.3.1.5

The IfIndex of the protecting entity.

adGenMuxPEthernetProtGroupRowStatus

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.3.3.1.6

Protection Group Row Status.

adGenMuxPEthernetProtGroupLastProvError

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.3.3.1.7

This string describes the last error experienced
for this particular entry in the table.

adGenMuxPEthernetProtGroupOperStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.3.3.1.8

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.3.3.1.9

adGenMuxPEthernetProtGroupStatusString

The status string for the protection group. Indicates
why the protection group is down. If protection group is up,
then a blank string will be returned.

adGenMuxPEthernetProtGroupWorkIsOnline

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.3.3.1.10

Indicates whether or not the working-entity is online. If not,
the protect-entity is online.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.3.3.1.11

adGenMuxPEthernetProtGroupSwitchCommands

Protection Group Switch Commands.

Enumerationr/w

Enumerated Values:

1	clear
2	manualSwitchToWork
3	manualSwitchToProt
4	forceSwitchToWork
5	forceSwitchToProt
6	lockout

.1.3.6.1.4.1.664.5.70.26.3.3.1.12

adGenMuxPEthernetProtGroupWorkEntityStatus

Working Entity Signal Status.

Enumeration

Enumerated Values:

1	clear
2	signalFaulty
3	signalDegraded
4	down

.1.3.6.1.4.1.664.5.70.26.3.3.1.13

adGenMuxPEthernetProtGroupProtectEntityStatus

Protect Entity Signal Status.

Enumeration

Enumerated Values:

1	clear
2	signalFaulty
3	signalDegraded
4	down

.1.3.6.1.4.1.664.5.70.26.3.3.1.14

adGenMuxPEthernetProtGroupRevertiveEnable

Enables/disables revertive switching for this protection group.

adGenMuxPEthernetProtGroupWaitToRestoreTime

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.3.3.1.15

Wait to restore time(in minutes).

Integer32r/w

Constraints:
range: 1-20

.1.3.6.1.4.1.664.5.70.26.3.3.1.16

adGenMuxPEthernetProtGroupWaitToRestoreRemainingTime

The remaining time(in seconds) to restore the entity when wait to restore is enabled.

secondsUnsigned32

Constraints:
range: 0-1200

.1.3.6.1.4.1.664.5.70.26.3.3.1.17

adGenMuxPEthernetProtGroupLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.3.4 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPEthernetProtGroupLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPEthernetProtGroupLastCreateErrorTable'

The Ethernet Protection Group Last Create Error table.
This table is used to indicate the last error that occurred
during creation of a protection group.

adGenMuxPEthernetProtGroupLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.3.4.1

An entry in the Ethernet Protection Group Last Create Error table.

Indexes

Column	Syntax	OID
adGenMuxPEthernetProtGroupLastCreateError The last error that occurred during the creation of a protection group.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.3.4.1.1`

adGenMuxPLagGroupTable

table

.1.3.6.1.4.1.664.5.70.26.4.1 · 1 row entry · 11 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPLagGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPLagGroupTable'

The Link Aggregation Group table.

adGenMuxPLagGroupEntry row .1.3.6.1.4.1.664.5.70.26.4.1.1

An entry in the Link Aggregation Group table.
The indexing is per the LAG interface index.
The IANA type is linegroup (210).

Indexes

adGenMuxPLagGroupRowStatus

Column Syntax OID

This object is used to create a new row or modify or delete an
existing row in this table. Setting this value to 'active'
indicates that the LAG is administratively In-Service.
Setting this value to 'notInService' indic…

adGenMuxPLagGroupOperStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.4.1.1.1

The current operational status of the local end of the LAG.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.4.1.1.2

adGenMuxPLagGroupNumber

The LAG number n, where n is between 1 and the maximum number
of LAG groups.

adGenMuxPLagGroupMaxNumCfgLinks

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.26.4.1.1.3

adGenMuxPLagGroupName

The textual name given to this LAG.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.4.1.1.4

The maximum number of ports that may be configured
on this LAG group.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.26.4.1.1.5

adGenMuxPLagGroupNumCfgLinks

The actual number of ports configured on this LAG group.

adGenMuxPLagGroupMinNumActLinks

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.26.4.1.1.6

The minimum number of active port links that have
to be mapped to this LAG before the OperStatus
of the LAG can be declared 'up'.
If the active number ever drops below this number
then the LAG will enter an OperStatus o…

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.26.4.1.1.7

adGenMuxPLagGroupNumActLinks

The actual number of active port links that are 'up'.

adGenMuxPLagGroupLastChange

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.26.4.1.1.8

The value of sysUpTime at the time this
LAG group entered its current operational state.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.664.5.70.26.4.1.1.9

adGenMuxPLagGroupLastError

The string describing the last error experienced.

adGenMuxPLagGroupMinActLinkAlarmEnable

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.4.1.1.10

Enable or disable the minimum active links alarm for this link aggregation group.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.4.1.1.11

adGenMuxPLagGroupLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.4.2 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPLagGroupLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPLagGroupLastCreateErrorTable'

The Muxponder LAG Group Last Create Error table.
This table is used to indicate the last error that occurred
during creation of a LAG group.

adGenMuxPLagGroupLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.4.2.1

An entry in the Muxponder LAG Group Last Create Error table.

Indexes

IF-MIBifIndex adGenMuxPLagPortMapPort

Column	Syntax	OID
adGenMuxPLagGroupLastCreateError The last error that occurred during the creation of a LAG.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.4.2.1.1`

adGenMuxPLagPortMapTable

table

.1.3.6.1.4.1.664.5.70.26.4.3 · 1 row entry · 7 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPLagPortMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPLagPortMapTable'

Row creation adds/maps a physical port to a LAG.

adGenMuxPLagPortMapEntry row .1.3.6.1.4.1.664.5.70.26.4.3.1

An entry in the Port Map table.
This entry associates one port with a LAG.
Indexing is via LAG interface index and faceplate
port interface index.

Indexes

Column Syntax OID

adGenMuxPLagPortMapPort

Faceplate port interface index.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.4.3.1.1

adGenMuxPLagPortMapRowStatus

This object is used to create a new row or delete an
existing row in this table. Setting this value to ?createAndGo?
adds the port to the LAG. Setting this value to ?destroy?
removes the port from the LAG (and the tabl…

adGenMuxPLagPortMapOperStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.4.3.1.2

The current operational status of the LAG-Port mapping
indicating if the physical port is actively participating
in the LAG. This can be down if the row status of the LAG
is down, or the physical port is down.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.4.3.1.3

adGenMuxPLagPortMapLagNumber

The LAG number n, where n is between 1 and the maximum number
of LAG groups.

adGenMuxPLagPortMapPortNumber

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.26.4.3.1.4

The faceplate port number n, where n is between 1 and the number
of faceplate ports.

adGenMuxPLagPortMapLastChange

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.26.4.3.1.5

The value of sysUpTime at the time this LAG-Port mapping entered
its current operational state.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.664.5.70.26.4.3.1.6

adGenMuxPLagPortMapLastError

The string describing the last error experienced.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.4.3.1.7

adGenMuxPLagPortMapLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.4.4 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPLagPortMapLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPLagPortMapLastCreateErrorTable'

The Muxponder LAG-Port Last Create Error table.
This table is used to indicate the last error that occurred
during creation of a LAG-Port map.

adGenMuxPLagPortMapLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.4.4.1

An entry in the Muxponder LAG-Port Last Create Error table.
The table is indexed by the LAG group for which the port create failed.

Indexes

Column	Syntax	OID
adGenMuxPLagPortMapLastCreateError The last error that occurred during the creation of a LAG.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.4.4.1.1`

adGenMuxPLagPortStatusTable

table

.1.3.6.1.4.1.664.5.70.26.4.5 · 1 row entry · 2 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPLagPortStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPLagPortStatusTable'

Displays the status of the available ports in the system,
including which LAG group (if any) a port is associated.

adGenMuxPLagPortStatusEntry row .1.3.6.1.4.1.664.5.70.26.4.5.1

An entry in the Port Status table.
Each entry is represents one port.

Indexes

adGenMuxPLagPortStatusLagIfIndex

Column Syntax OID

The ifIndex value of the LAG group of which this
port is apart. A value of '0' indicates that the port
is currently not mapped to any LAG group. IANA type
should be linegroup(210).

adGenMuxPLagPortStatusOperStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.26.4.5.1.1

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.4.5.1.2

adGenMuxPTimingProvTable

table

.1.3.6.1.4.1.664.5.70.26.5.1.1 · 1 row entry · 12 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPTimingProvTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPTimingProvTable'

The Muxponder Timing provisioning table.

adGenMuxPTimingProvEntry row .1.3.6.1.4.1.664.5.70.26.5.1.1.1

An entry in the Muxponder Timing provisioning table.

Indexes

adGenMuxPTimingPrimarySourceSelection

Column Syntax OID

The timing source selection for the primary timing source. If the timing
source selection is an Interface or InterfaceFixed, the interface index
must be provisioned using the adGenMuxPTimingPrimarySourceInterface OID.
T…

Enumerationr/w

Enumerated Values:

1	system
2	interface
3	interfaceFixed

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.1

adGenMuxPTimingPrimarySourceInterface

The interface index for the primary timing source. If the primary timing source
selection is an Interface or InterfaceFixed, set this variable to the interface
index from where the timing will be derived. This variable …

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.2

adGenMuxPTimingSecondarySourceSelection

The timing source selection for the secondary timing source. If the timing
source selection is an Interface or InterfaceFixed, the interface index
must be provisioned using the adGenMuxPTimingSecondarySourceInterface OI…

Enumerationr/w

Enumerated Values:

1	system
2	interface
3	interfaceFixed

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.3

adGenMuxPTimingSecondarySourceInterface

The interface index for the secondary timing source. If the secondary timing source
selection is an Interface or InterfaceFixed, set this variable to the interface
index from where the timing will be derived. This varia…

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.4

adGenMuxPTimingAlarmEnablePrimaryFailed

This variable indicates the primary timing source failed alarm flag.
Setting this variable to true will generate an alarm when the primary
timing source fails.

adGenMuxPTimingAlarmEnableSecondaryFailed

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.5

This variable indicates the secondary timing source failed alarm flag.
Setting this variable to true will generate an alarm when the secondary
timing source fails.

adGenMuxPTimingAlarmEnableHoldover

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.6

This variable indicates the holdover alarm flag. Setting this variable
to true will generate an alarm when both the primary and secondary
timing source fails and the system switches to internal timing.

adGenMuxPTimingForceClockFailover

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.7

adGenMuxPTimingReceiveSSMEnabledeprecated

This variable indicates the clock selection process as described in
ITU-T standard G.781 section 5.12.

If set to enable, then the incoming SSM messages are enabled for clock
selection (not applicable if c…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.8

Writing 1 to this object will cause the clock source to failover.

Enumerationr/w

Enumerated Values:

1	failOver
2	notAvailable

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.9

adGenMuxPTimingRevertiveSwitchType

This variable indicates the clock selection process as described in
ITU-T standard G.781 section 5.12.

If set to ssm, then the incoming SSM messages are enabled for clock
selection (not applicable if cloc…

Enumerationr/w

Enumerated Values:

1	ssm
2	none

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.10

adGenMuxPTimingLastError

The string describing the last error experienced during provisioning changes.

adGenMuxPTimingSystemTimingType

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.11

This variable indicates the type of the system timing generated by the module.
If set to loopA/loopB, the module will provide packet based timing references
to the system. The module can only be configured to provide ei…

Enumerationr/w

Enumerated Values:

1	none
2	loopA
3	loopB

.1.3.6.1.4.1.664.5.70.26.5.1.1.1.12

adGenMuxPTimingProvPortTable

table

.1.3.6.1.4.1.664.5.70.26.5.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPTimingProvPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPTimingProvPortTable'

The Muxponder Timing port provisioning table.

adGenMuxPTimingProvPortEntry row .1.3.6.1.4.1.664.5.70.26.5.1.2.1

An entry in the Muxponder Timing port provisioning table.

Indexes

adGenMuxPTimingTransmitSSMEnable

Column Syntax OID

This object indicates if SSM transmission is enabled/disabled on a port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.664.5.70.26.5.1.2.1.1

adGenMuxPTimingEsmcType

This object is applicable only to SyncE interfaces.

This variable indicates the ESMC type(EEC options) selected for the port.
The EEC (Ethernet Equipment Clock) options are for Synchronous Ethernet device…

Enumerationr/w

Enumerated Values:

1	syncEECOption1
2	syncEECOption2

.1.3.6.1.4.1.664.5.70.26.5.1.2.1.2

adGenMuxPTimingStatusTable

table

.1.3.6.1.4.1.664.5.70.26.5.2.1 · 1 row entry · 7 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPTimingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPTimingStatusTable'

The Muxponder Timing status table.

adGenMuxPTimingStatusEntry row .1.3.6.1.4.1.664.5.70.26.5.2.1.1

An entry in the Muxponder Timing status table.

Indexes

adGenMuxPTimingCurrentSourceType

Column Syntax OID

Displays which timing source is currently in use by the system.

Enumeration

Enumerated Values:

1	primary
2	secondary
3	internal

.1.3.6.1.4.1.664.5.70.26.5.2.1.1.1

adGenMuxPTimingPrimarySourceHealth

Displays the health of the primary timing source.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.5.2.1.1.2

adGenMuxPTimingSecondarySourceHealth

Displays the health of the secondary timing source.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.5.2.1.1.3

adGenMuxPTimingPrimarySourceRxSSM

This variable indicates the SSM value received by the primary clock source.

adGenMuxPTimingSecondarySourceRxSSM

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.5.2.1.1.4

This variable indicates the SSM value received by the secondary clock source.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.5.2.1.1.5

adGenMuxPTimingTxSSM1

This variable indicates the SSM value transmitted by E1 Optimized(SDH) or
SyncE EEC-Option 1 ports.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.5.2.1.1.6

adGenMuxPTimingTxSSM2

This variable indicates the SSM value transmitted by T1 Optimized(SONET) or
SyncE EEC-Option 2 ports.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.5.2.1.1.7

adGenMuxPPhysPeerProvTable

table deprecated

.1.3.6.1.4.1.664.5.70.26.6.1 · 1 row entry · 12 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPPhysPeerProvTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPPhysPeerProvTable'

The Muxponder Physical Peer Provisioning table. This table is used to
configure physical port connection information of bi-directional ports.

This table is deprecated. Use adGenPeerAdjacencyPhysicalTable in
ADTRAN-GENERIC-PEER-ADJACENCY-MIB for configuring physical peer.

adGenMuxPPhysPeerProvEntry row .1.3.6.1.4.1.664.5.70.26.6.1.1

An entry in the Muxponder Physical Peer Provisioning table.

Indexes

Column	Syntax	OID
adGenMuxPPhysPeerOneIpAddressTxdeprecated This variable is used to indicate the IP address of the peer device connected to the Transmit component of a bi-directional interface. This object is deprecated. Use OID adGenPeerAdjacencyPhysicalOneIpAdd…	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.664.5.70.26.6.1.1.1`
adGenMuxPPhysPeerOneIpAddressRxdeprecated This variable is used to indicate the IP address of the peer device connected to the Receive component of a bi-directional interface. This object is deprecated. Use OID adGenPeerAdjacencyPhysicalOneIpAddr…	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.664.5.70.26.6.1.1.2`
adGenMuxPPhysPeerOneChassisIdTxdeprecated This string is used to indicate the chassis name of the peer device connected to the Transmit component of a bi-directional interface. It is recommended to use the peer device TID as the chassis name. Thi…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.6.1.1.3`
adGenMuxPPhysPeerOneChassisIdRxdeprecated This string is used to indicate the chassis name of the peer device connected to the Receive component of a bi-directional interface. It is recommended to use the peer device TID as the chassis name. This…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.6.1.1.4`
adGenMuxPPhysPeerOnePortIdTxdeprecated This string is used to specify the port identification of the peer device connected to the Transmit component of a bi-directional interface. It is recommended to specify the interface type of the peer port along with th…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.6.1.1.5`
adGenMuxPPhysPeerOnePortIdRxdeprecated This string is used to specify the port identification of the peer device connected to the Receive component of a bi-directional interface. It is recommended to specify the interface type of the peer port along with the…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.6.1.1.6`
adGenMuxPPhysPeerTwoIpAddressTxdeprecated This object is applicable only when two peer devices are connected to the interface using a Y-cable. This variable is used to indicate the IP address of the peer device connected to the Transmit component of a bi-direct…	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.664.5.70.26.6.1.1.7`
adGenMuxPPhysPeerTwoIpAddressRxdeprecated This object is applicable only when two peer devices are connected to the interface using a Y-cable.This variable is used to indicate the IP address of the peer device connected to the Receive component of a bi-directio…	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.664.5.70.26.6.1.1.8`
adGenMuxPPhysPeerTwoChassisIdTxdeprecated This object is applicable only when two peer devices are connected to the interface using a Y-cable. This string is used to indicate the chassis name of the peer device connected to the Transmit component of a bi-direct…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.6.1.1.9`
adGenMuxPPhysPeerTwoChassisIdRxdeprecated This object is applicable only when two peer devices are connected to the interface using a Y-cable. This string is used to indicate the chassis name of the peer device connected to the Receive component of a bi-directi…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.6.1.1.10`
adGenMuxPPhysPeerTwoPortIdTxdeprecated This object is applicable only when two peer devices are connected to the interface using a Y-cable. This string is used to specify the port identification of the peer device connected to the Transmit component of a bi-…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.6.1.1.11`
adGenMuxPPhysPeerTwoPortIdRxdeprecated This object is applicable only when two peer devices are connected to the interface using a Y-cable. This string is used to specify the port identification of the peer device connected to the Receive component of a bi-d…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.6.1.1.12`

adGenMuxPIfStatusTable

table

.1.3.6.1.4.1.664.5.70.26.7.1 · 1 row entry · 2 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPIfStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPIfStatusTable'

The Muxponder Interface status table.

adGenMuxPIfStatusEntry row .1.3.6.1.4.1.664.5.70.26.7.1.1

An entry in the Muxponder Interface status table.

Indexes

adGenMuxPInterfacePortStatus

Column Syntax OID

Port status.
The bit positions are:
0 - this interface is in fault
1 - at least one superordinate interface or equipment is in fault
2 - at least one subordinate interface is in fault
3 - superordinate interface or …

Bits

Enumerated Values:

0	fault
1	superordinateFault
2	subordinateFault
3	superordinateUnassigned
4	subordinateInserviceOrMaintenance
5	protected
6	superordinateProtected
7	subordinateProtected
8	mapped
9	reserved1
10	subordinateMapped
11	crossconnected
12	reserved2
13	subordinateCrossConnected
14	online

.1.3.6.1.4.1.664.5.70.26.7.1.1.1

adGenMuxPInterfacePortProtGrpName

The name of the protection group for this port. If this port is not part of a
protection group, this field will be blank.

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPMappingName

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.7.1.1.2

adGenMuxPMappingTable

table

.1.3.6.1.4.1.664.5.70.26.8.1 · 1 row entry · 11 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMappingTable'

The Muxponder Mapping table.

adGenMuxPMappingEntry row .1.3.6.1.4.1.664.5.70.26.8.1.1

An entry in the Muxponder Mapping table.

Indexes

Column Syntax OID

adGenMuxPMappingName

Mapping name.

adGenMuxPMappingDirection

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.8.1.1.1

adGenMuxPMappingType

Mapping type.

Enumerationr/w

Enumerated Values:

1	bitTransparentSynchronous
2	bitTransparentAsynchronous
3	gfpfNontransparent
4	gfpfSemitransparent
5	gfptTransparent
6	wis
7	passthrough
8	crossconnect
9	gmp

.1.3.6.1.4.1.664.5.70.26.8.1.1.2

Mapping direction.

Enumerationr/w

Enumerated Values:

1	twoWay
2	oneWay

.1.3.6.1.4.1.664.5.70.26.8.1.1.3

adGenMuxPMappingSrcType

This is used to indicate the payload type of the source
endpoint.

adGenMuxPMappingSrcInterface

Type Values:

1	notApplicable
2	sts1
3	sts3c
4	sts12c
5	sts48c
6	sts192c
7	sonetLine
8	vc3
9	vc4
10	vc4x4c
11	vc4x16c
12	vc4x64c
13	sdhLine
14	otnPort
15	odu4
16	odu3
17	odu3e1
18	odu3e2
19	odu2
20	odu2e
21	odu2f
22	odu1e
23	odu1f
24	odu1
25	odu0
26	oduflex
27	timeslot
28	gigabitEthernet
29	tenGigabitEthernet
30	fibreChannel1G
31	fibreChannel2G
32	fibreChannel4G
33	fibreChannel8G
34	fibreChannel10G

Description:

Possible payload types for muxponders.

.1.3.6.1.4.1.664.5.70.26.8.1.1.4

The interface of the source endpoint.

MuxPMapInterfacer/w

Type Constraints:
range: 10

Description:

An octet string used to uniquely identify a mappable interface. A value of zero indicates
that there isn't any encapsulation at that level.
The Octet string is defined as follows:
OCTET Position Represented…

.1.3.6.1.4.1.664.5.70.26.8.1.1.5

adGenMuxPMappingDstType

This is used to indicate the payload type of the destination
endpoint.

MuxPPayloadTypesr/w

Type Values:

1	notApplicable
2	sts1
3	sts3c
4	sts12c
5	sts48c
6	sts192c
7	sonetLine
8	vc3
9	vc4
10	vc4x4c
11	vc4x16c
12	vc4x64c
13	sdhLine
14	otnPort
15	odu4
16	odu3
17	odu3e1
18	odu3e2
19	odu2
20	odu2e
21	odu2f
22	odu1e
23	odu1f
24	odu1
25	odu0
26	oduflex
27	timeslot
28	gigabitEthernet
29	tenGigabitEthernet
30	fibreChannel1G
31	fibreChannel2G
32	fibreChannel4G
33	fibreChannel8G
34	fibreChannel10G

Description:

Possible payload types for muxponders.

.1.3.6.1.4.1.664.5.70.26.8.1.1.6

adGenMuxPMappingDstInterface

The interface of the destination endpoint.

MuxPMapInterfacer/w

Type Constraints:
range: 10

Description:

.1.3.6.1.4.1.664.5.70.26.8.1.1.7

adGenMuxPMappingRowStatus

Mapping Row Status.

adGenMuxPMappingLastProvError

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.8.1.1.8

This string describes the last error experienced
for this particular entry in the table.

adGenMuxPMappingOperStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.8.1.1.9

Operation Status of the Mapping. This operational status
indicates whether or not the provisioning necessary for a mapping
to function properly has been adequately provisioned. It is not affected by
by faults/degrades…

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.8.1.1.10

adGenMuxPMappingStatusString

The status string for the mapping. Indicates
why the mapping is down. If the mapping is up,
then a blank string will be returned.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.8.1.1.11

adGenMuxPMappingLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.8.2 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMappingLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMappingLastCreateErrorTable'

The Muxponder Mapping last create error table.
Table that indicates the last error that occurred
during creation of a mapping.

adGenMuxPMappingLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.8.2.1

An entry in the Muxponder Mapping Last Create Error table.

Indexes

IF-MIBifIndex adGenMuxPPortMappingName

Column	Syntax	OID
adGenMuxPMappingLastCreateError The last error that occurred during the creation of a mapping.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.8.2.1.1`

adGenMuxPPortMappingStatusTable

table

.1.3.6.1.4.1.664.5.70.26.8.3 · 1 row entry · 2 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPPortMappingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPPortMappingStatusTable'

The Muxponder Port Mapping Status table.

adGenMuxPPortMappingStatusEntry row .1.3.6.1.4.1.664.5.70.26.8.3.1

An entry in the Muxponder Port Mapping Status table.

Indexes

Column Syntax OID

adGenMuxPPortMappingName

Mapping name.

adGenMuxPPortMappingStatus

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.8.3.1.1

This OID indicates whether this port is defined as a source, destination or both for
this mapping.

Enumeration

Enumerated Values:

1	source
2	destination
3	sourceAndDestination

.1.3.6.1.4.1.664.5.70.26.8.3.1.2

adGenMuxPMultiProtGroupTable

table

.1.3.6.1.4.1.664.5.70.26.9.1 · 1 row entry · 9 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMultiProtGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMultiProtGroupTable'

The Multi Protection Group table.  This table is used
to create multi protection groups.  A multi-protection group
defines a set of protection pairs in which their switching logic
is linked causing them to all switch at the same time.  Each
protection pair must be redundant(the working-entity and protect-
entity are on different cards) and mapped to a timeslot within the
same high-speed ODU1.

adGenMuxPMultiProtGroupEntry row .1.3.6.1.4.1.664.5.70.26.9.1.1

An entry in the Multi Protection Group table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPMultiProtGroupName

Column Syntax OID

adGenMuxPMultiProtGroupName

Multi Protection Group name.

adGenMuxPMultiProtGroupRowStatus

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.1.1.1

Multi Protection Group Row Status.

adGenMuxPMultiProtGroupLastProvError

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.9.1.1.2

This string describes the last error experienced
for this particular entry in the table.

adGenMuxPMultiProtGroupOperStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.1.1.3

Operational Status of the Multi Protection Group. This operational status
indicates whether or not the provisioning necessary for protection switching
to function properly has been adequately provisioned. It is not af…

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.9.1.1.4

adGenMuxPMultiProtGroupStatusString

The status string for the multi protection group. Indicates
why the protection group is down. If protection group is up,
then a blank string will be returned.

adGenMuxPMultiProtGroupWorkIsOnline

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.1.1.5

Indicates whether or not the working-entity is online. If not,
the protect-entity is online.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.9.1.1.6

adGenMuxPMultiProtGroupSwitchCommands

Multi Protection Group Switch Commands.

Enumerationr/w

Enumerated Values:

1	clear
2	manualSwitchToWork
3	manualSwitchToProt
4	forceSwitchToWork
5	forceSwitchToProt
6	lockout

.1.3.6.1.4.1.664.5.70.26.9.1.1.7

adGenMuxPMultiProtGroupRevertiveEnable

Enables/disables revertive switching for this multi protection group.

adGenMuxPMultiProtGroupWaitToRestoreTime

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.664.5.70.26.9.1.1.8

Wait to restore time(in minutes).

Integer32r/w

Constraints:
range: 1-20

.1.3.6.1.4.1.664.5.70.26.9.1.1.9

adGenMuxPMultiProtGroupLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.9.2 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMultiProtGroupLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMultiProtGroupLastCreateErrorTable'

The Multi Protection Group Last Create Error table.
This table is used to indicate the last error that occurred
during creation of a multi protection group.

adGenMuxPMultiProtGroupLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.9.2.1

An entry in the Multi Protection Group Last Create Error table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPMultiProtGroupName adGenMuxPMultiSonetProtPairName

Column	Syntax	OID
adGenMuxPMultiProtGroupLastCreateError The last error that occurred during the creation of a protection group.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.9.2.1.1`

adGenMuxPMultiSonetProtPairTable

table

.1.3.6.1.4.1.664.5.70.26.9.3 · 1 row entry · 22 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMultiSonetProtPairTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMultiSonetProtPairTable'

The Multi SONET Protection Pair table.  This table is used
to create multi protection pairs out of two SONET interfaces.

adGenMuxPMultiSonetProtPairEntry row .1.3.6.1.4.1.664.5.70.26.9.3.1

An entry in the Multi SONET Protection Pair table.

Indexes

Column Syntax OID

adGenMuxPMultiSonetProtPairName

Multi SONET Protection Pair name.

adGenMuxPMultiSonetProtPairType

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.3.1.1

Multi SONET Protection Pair type.

Enumerationr/w

Enumerated Values:

1	terminalUniDir
2	yCable

.1.3.6.1.4.1.664.5.70.26.9.3.1.2

adGenMuxPMultiSonetProtPairWorkingType

This is used to indicate the payload type of the working
entity.

adGenMuxPMultiSonetProtPairWorkingIfIndex

Type Values:

1	notApplicable
2	sts1
3	sts3c
4	sts12c
5	sts48c
6	sts192c
7	sonetLine
8	vc3
9	vc4
10	vc4x4c
11	vc4x16c
12	vc4x64c
13	sdhLine
14	otnPort
15	odu4
16	odu3
17	odu3e1
18	odu3e2
19	odu2
20	odu2e
21	odu2f
22	odu1e
23	odu1f
24	odu1
25	odu0
26	oduflex
27	timeslot
28	gigabitEthernet
29	tenGigabitEthernet
30	fibreChannel1G
31	fibreChannel2G
32	fibreChannel4G
33	fibreChannel8G
34	fibreChannel10G

Description:

Possible payload types for muxponders.

.1.3.6.1.4.1.664.5.70.26.9.3.1.3

The IfIndex of the working entity.

adGenMuxPMultiSonetProtPairProtectingType

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.9.3.1.4

This is used to indicate the payload type of the protecting
entity.

adGenMuxPMultiSonetProtPairProtectingIfIndex

Type Values:

1	notApplicable
2	sts1
3	sts3c
4	sts12c
5	sts48c
6	sts192c
7	sonetLine
8	vc3
9	vc4
10	vc4x4c
11	vc4x16c
12	vc4x64c
13	sdhLine
14	otnPort
15	odu4
16	odu3
17	odu3e1
18	odu3e2
19	odu2
20	odu2e
21	odu2f
22	odu1e
23	odu1f
24	odu1
25	odu0
26	oduflex
27	timeslot
28	gigabitEthernet
29	tenGigabitEthernet
30	fibreChannel1G
31	fibreChannel2G
32	fibreChannel4G
33	fibreChannel8G
34	fibreChannel10G

Description:

Possible payload types for muxponders.

.1.3.6.1.4.1.664.5.70.26.9.3.1.5

The IfIndex of the protecting entity.

adGenMuxPMultiSonetProtPairRowStatus

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.9.3.1.6

Protection Pair Row Status.

adGenMuxPMultiSonetProtPairLastProvError

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.9.3.1.7

This string describes the last error experienced
for this particular entry in the table.

adGenMuxPMultiSonetProtPairWorkEntityStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.3.1.8

Working Entity Signal Status.

Enumeration

Enumerated Values:

1	clear
2	signalFaulty
3	signalDegraded
4	down

.1.3.6.1.4.1.664.5.70.26.9.3.1.9

adGenMuxPMultiSonetProtPairProtectEntityStatus

Protect Entity Signal Status.

Enumeration

Enumerated Values:

1	clear
2	signalFaulty
3	signalDegraded
4	down

.1.3.6.1.4.1.664.5.70.26.9.3.1.10

adGenMuxPMultiSonetProtPairTxK1Request

Transmit K1 byte Request.

Enumeration

Enumerated Values:

1	notAvailable
2	noRequest
3	doNotRevert
4	reverseRequest
5	waitToRestore
6	manualSwitch
7	signalDegrade
8	signalFail
9	forceSwitch
10	lockout
11	reserved
12	notSupported

.1.3.6.1.4.1.664.5.70.26.9.3.1.11

adGenMuxPMultiSonetProtPairTxK1RequestChannel

Transmit K1 byte Request Channel.

Enumeration

Enumerated Values:

1	notAvailable
2	protect
3	working
4	invalid

.1.3.6.1.4.1.664.5.70.26.9.3.1.12

adGenMuxPMultiSonetProtPairTxK2BridgeChannel

Transmit K2 byte Bridge Channel.

Enumeration

Enumerated Values:

1	notAvailable
2	protect
3	working
4	invalid

.1.3.6.1.4.1.664.5.70.26.9.3.1.13

adGenMuxPMultiSonetProtPairTxK2APSArchitecture

Transmit K2 byte APS Architecture.

Enumeration

Enumerated Values:

1	notAvailable
2	notProtected
3	onePlusOne
4	oneToOne

.1.3.6.1.4.1.664.5.70.26.9.3.1.14

adGenMuxPMultiSonetProtPairTxK2APSMode

Transmit K2 byte APS Mode.

Enumeration

Enumerated Values:

1	notAvailable
2	unidirectional
3	bidirectional
4	aisL
5	rdiL
6	msAis
7	msRdi
8	reserved

.1.3.6.1.4.1.664.5.70.26.9.3.1.15

adGenMuxPMultiSonetProtPairRxK1Request

Receive K1 byte Request. If notAvailable is returned, then the following OIDs are not valid:
adGenMuxPSonetProtPairRxK1RequestChannel, adGenMuxPSonetProtPairRxK2BridgeChannel,
adGenMuxPSonetProtPairRxK2APSArchitecture,…

Enumeration

Enumerated Values:

1	notAvailable
2	noRequest
3	doNotRevert
4	reverseRequest
5	waitToRestore
6	manualSwitch
7	signalDegrade
8	signalFail
9	forceSwitch
10	lockout
11	reserved
12	notSupported

.1.3.6.1.4.1.664.5.70.26.9.3.1.16

adGenMuxPMultiSonetProtPairRxK1RequestChannel

Receive K1 byte Request Channel.

Enumeration

Enumerated Values:

1	notAvailable
2	protect
3	working
4	invalid

.1.3.6.1.4.1.664.5.70.26.9.3.1.17

adGenMuxPMultiSonetProtPairRxK2BridgeChannel

Receive K2 byte Bridge Channel.

Enumeration

Enumerated Values:

1	notAvailable
2	protect
3	working
4	invalid

.1.3.6.1.4.1.664.5.70.26.9.3.1.18

adGenMuxPMultiSonetProtPairRxK2APSArchitecture

Receive K2 byte APS Architecture.

Enumeration

Enumerated Values:

1	notAvailable
2	notProtected
3	onePlusOne
4	oneToOne

.1.3.6.1.4.1.664.5.70.26.9.3.1.19

adGenMuxPMultiSonetProtPairRxK2APSMode

Receive K2 byte APS Mode.

Enumeration

Enumerated Values:

1	notAvailable
2	unidirectional
3	bidirectional
4	aisL
5	rdiL
6	msAis
7	msRdi
8	reserved

.1.3.6.1.4.1.664.5.70.26.9.3.1.20

adGenMuxPMultiSonetProtPairOperStatus

Operational Status of the Protection Pair. This operational status
indicates whether or not the provisioning necessary for protection switching
to function properly has been adequately provisioned. It is not affected …

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.9.3.1.21

adGenMuxPMultiSonetProtPairStatusString

The status string for the protection pair. Indicates
why the protection pair is down. If protection pair is up,
then a blank string will be returned.

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPMultiProtGroupName

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.3.1.22

adGenMuxPMultiSonetProtPairLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.9.4 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMultiSonetProtPairLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMultiSonetProtPairLastCreateErrorTable'

The Multi SONET Protection Pair Last Create Error table.
This table is used to indicate the last error that occurred
during creation of a protection pair.

adGenMuxPMultiSonetProtPairLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.9.4.1

An entry in the Multi SONET Protection Pair Last Create Error table.

Indexes

Column	Syntax	OID
adGenMuxPMultiSonetProtPairLastCreateError The last error that occurred during the creation of a protection pair.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.9.4.1.1`

adGenMuxPMultiEthernetProtPairTable

table

.1.3.6.1.4.1.664.5.70.26.9.5 · 1 row entry · 12 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMultiEthernetProtPairTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMultiEthernetProtPairTable'

The Multi Ethernet Protection Pair table.  This table is used
to create protection pairs between two Ethernet interfaces.

adGenMuxPMultiEthernetProtPairEntry row .1.3.6.1.4.1.664.5.70.26.9.5.1

An entry in the Multi Ethernet Protection Pair table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPMultiProtGroupName adGenMuxPMultiEthernetProtPairName

Column Syntax OID

adGenMuxPMultiEthernetProtPairName

Multi Protection Pair name.

adGenMuxPMultiEthernetProtPairType

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.5.1.1

Multi Protection Pair type.

Enumerationr/w

Enumerated Values:

yCable

.1.3.6.1.4.1.664.5.70.26.9.5.1.2

adGenMuxPMultiEthernetProtPairWorkingType

The payload type of the working entity.

adGenMuxPMultiEthernetProtPairWorkingIfIndex

Type Values:

1	notCompatible
2	gigabitEthernet
3	tenGigabitEthernet

Description:

Possible payload types for Ethernet.

.1.3.6.1.4.1.664.5.70.26.9.5.1.3

The IfIndex of the working entity.

adGenMuxPMultiEthernetProtPairProtectingType

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.9.5.1.4

The payload type of the protecting entity.

adGenMuxPMultiEthernetProtPairProtectingIfIndex

Type Values:

1	notCompatible
2	gigabitEthernet
3	tenGigabitEthernet

Description:

Possible payload types for Ethernet.

.1.3.6.1.4.1.664.5.70.26.9.5.1.5

The IfIndex of the protecting entity.

adGenMuxPMultiEthernetProtPairRowStatus

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.9.5.1.6

Multi Ethernet Protection Pair Row Status.

adGenMuxPMultiEthernetProtPairLastProvError

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.9.5.1.7

This string describes the last error experienced
for this particular entry in the table.

adGenMuxPMultiEthernetProtPairOperStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.5.1.8

Operational Status of the Multi Ethernet Protection Pair. This operational status
indicates whether or not the provisioning necessary for protection switching
to function properly has been adequately provisioned. It i…

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.9.5.1.9

adGenMuxPMultiEthernetProtPairStatusString

The status string for the protection pair. Indicates
why the protection pair is down. If protection pair is up,
then a blank string will be returned.

adGenMuxPMultiEthernetProtPairWorkEntityStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.5.1.10

Working Entity Signal Status.

Enumeration

Enumerated Values:

1	clear
2	signalFaulty
3	signalDegraded
4	down

.1.3.6.1.4.1.664.5.70.26.9.5.1.11

adGenMuxPMultiEthernetProtPairProtectEntityStatus

Protect Entity Signal Status.

Enumeration

Enumerated Values:

1	clear
2	signalFaulty
3	signalDegraded
4	down

.1.3.6.1.4.1.664.5.70.26.9.5.1.12

adGenMuxPMultiEthernetProtPairLastCreateErrorTable

table

.1.3.6.1.4.1.664.5.70.26.9.6 · 1 row entry · 1 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMultiEthernetProtPairLastCreateErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMultiEthernetProtPairLastCreateErrorTable'

The Multi Ethernet Protection Pair Last Create Error table.
This table is used to indicate the last error that occurred
during creation of a protection pair.

adGenMuxPMultiEthernetProtPairLastCreateErrorEntry row .1.3.6.1.4.1.664.5.70.26.9.6.1

An entry in the Multi Ethernet Protection Pair Last Create Error table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPMultiProtGroupName

Column	Syntax	OID
adGenMuxPMultiEthernetProtPairLastCreateError The last error that occurred during the creation of a protection pair.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.664.5.70.26.9.6.1.1`

adGenMuxPMultiFibreChannelProtPairTable

table

.1.3.6.1.4.1.664.5.70.26.9.7 · 1 row entry · 12 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adGenMuxPMultiFibreChannelProtPairTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENMUXPONDER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENMUXPONDER-MIB::adGenMuxPMultiFibreChannelProtPairTable'

The Multi Ethernet Protection Pair table.  This table is used
to create protection pairs between two Fibre Channel interfaces.

adGenMuxPMultiFibreChannelProtPairEntry row .1.3.6.1.4.1.664.5.70.26.9.7.1

An entry in the Multi Fibre Channel Protection Pair table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenMuxPMultiProtGroupName adGenMuxPMultiFibreChannelProtPairName

Column Syntax OID

adGenMuxPMultiFibreChannelProtPairName

Multi Protection Pair name.

adGenMuxPMultiFibreChannelProtPairType

Constraints:
range: 1-50

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.7.1.1

Multi Protection Pair type.

Enumerationr/w

Enumerated Values:

yCable

.1.3.6.1.4.1.664.5.70.26.9.7.1.2

adGenMuxPMultiFibreChannelProtPairWorkingType

The payload type of the working entity.

FibreChanPayloadTypes

Type Values:

1	notCompatible
2	fibreChannel1G
3	fibreChannel2G
4	fibreChannel4G
5	fibreChannel8G
6	fibreChannel10G

Description:

Possible payload types for Fibre Channel.

.1.3.6.1.4.1.664.5.70.26.9.7.1.3

adGenMuxPMultiFibreChannelProtPairWorkingIfIndex

The IfIndex of the working entity.

adGenMuxPMultiFibreChannelProtPairProtectingType

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.9.7.1.4

The payload type of the protecting entity.

FibreChanPayloadTypes

Type Values:

1	notCompatible
2	fibreChannel1G
3	fibreChannel2G
4	fibreChannel4G
5	fibreChannel8G
6	fibreChannel10G

Description:

Possible payload types for Fibre Channel.

.1.3.6.1.4.1.664.5.70.26.9.7.1.5

adGenMuxPMultiFibreChannelProtPairProtectingIfIndex

The IfIndex of the protecting entity.

adGenMuxPMultiFibreChannelProtPairRowStatus

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.664.5.70.26.9.7.1.6

Multi Fibre Channel Protection Pair Row Status.

adGenMuxPMultiFibreChannelProtPairLastProvError

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.664.5.70.26.9.7.1.7

This string describes the last error experienced
for this particular entry in the table.

adGenMuxPMultiFibreChannelProtPairOperStatus

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.664.5.70.26.9.7.1.8

Operational Status of the Multi Fibre Channel Protection Pair. This operational status
indicates whether or not the provisioning necessary for protection switching
to function properly has been adequately provisioned. …

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.664.5.70.26.9.7.1.9

adGenMuxPMultiFibreChannelProtPairStatusString

The status string for the protection pair. Indicates
why the protection pair is down. If protection pair is up,
then a blank string will be returned.