This trap indicates that LOS alarm mode has cleared.
adGenGponOntSetBatteryFailureAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.10
This trap indicates that ONT Battery Failure alarm mode has set.
adGenGponOntClrBatteryLowAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.11
This trap indicates that ONT Battery Low alarm mode has cleared.
adGenGponOntSetBatteryLowAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.12
This trap indicates that ONT Battery Low alarm mode has set.
adGenGponOntClrPhyIntrustionAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.13
This trap indicates that ONT Physical Intrustion alarm mode has cleared.
adGenGponOntSetPhyIntrusionAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.14
This trap indicates that ONT Physical Intrusion alarm mode has set.
adGenGponOntDiscoveryAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.15
The OLT has discovered a new ONT that has not been activated yet.
adGenGponOntActivationAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.16
The OLT has activated a new ONT which should be discovered by the management system.
adGenGponConfigServerAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.18
The config server alarm has cleared.
adGenGponConfigServerAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.19
The ONT encountered a problem communicating with the config file servers.
adGenGponOntSetLOSAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.2
This trap indicates that LOS alarm mode has set.
adGenGponConfigFileAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.20
The config file alarm has cleared.
adGenGponConfigFileAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.21
The ONT encountered an error processing the configuration file.
adGenGponConfigChecksumMismatchAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.22
The config checksum mismatch alarm has cleared.
adGenGponConfigChecksumMismatchAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.23
The configuration file checksum has been changed locally on the ONT.
adGenGponOntOMCICommFailAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.24
indicates that ONT successfully established the OMCI communication after the
previous failure condition.
adGenGponOntOMCICommFailAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.25
This trap indicates that OMCI communication with an ONT failed to be established or has become inoperable.
adGenGponCirOversubscribedAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.26
This trap indicates clearing of PON CIR bandwidth oversubscribed condition.
adGenGponCirOversubscribedAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.27
This trap indicates that PON CIR bandwidth is oversubscribed. Any further ONU activation might fail.
adGenGponPonLosAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.28
rovision a threshold limit on percentage of ONTs that are activated once and are now in LOS condition which
will trigger the active alarm condition. If number of ONTs corresponding to one-half of the above active threshold
come back up again, this alarm will be cleared.
adGenGponPonLosAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.29
The percentage of ONTs activated once on a single PON in LOS condition that exceeds a provisioned threshold level.
adGenGponOntClrEquipmentAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.3
This trap indicates that ONT Equipment alarm mode has cleared.
adGenGponMulticastBwThresholdAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.30
This trap indicates the multicast bandwidth used is less than the multicast bandwidth threshold value provisioned on the PON.
adGenGponMulticastBwThresholdAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.31
This trap indicates the multicast bandwidth used is equal to or greater than the multicast bandwidth threshold value provisioned on the PON.
adGenGponPonDiscoveredInvalidSNAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.32
This trap indicates that an ONT has an invalid serial number during ONT discovery procedure.
adGenGponOntInvalidSNAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.33
This trap indicates that an activated ONT reports an invalid serial number.
adGenGponOntUpstreamBipTcaAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.34
indicates the ONT upstream BIP error rate remains less than the BIP error threshold 10^-(n+1)
for 1000 seconds, n is the BIP TCA Threshold value provisioned on the OLT.
adGenGponOntUpstreamBipTcaAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.35
indicates the ONT upstream BIP error rate is greater than or equal to the BIP threshold 10^-n,
n is the BIP TCA threshold value provisioned on the OLT.
adGenGponOntDownstreamBipTcaAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.36
indicates the ONT downstream BIP error rate remains less than the BIP threshold value 10^-(n+1)
for 1000 seconds, n is the BIP TCA threshold value provisioned on the OLT.
adGenGponOntDownstreamBipTcaAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.37
indicates the ONT downstream BIP error rate is greater than or equal to the BIP threshold value 10^-n,
n is the BIP TCA threshold value provisioned on the OLT.
adGenGponOntDyingGaspAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.38
This trap indicates that ONT is powering off imminently.
adGenGponPonFailoverAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.39
This trap indicates that a PON failover condition has been cleared.
adGenGponOntSetEquipmentAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.4
This trap indicates that ONT Equipment alarm mode has set.
adGenGponPonFailoverAlarmActive
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.40
This trap indicates that a PON failover condition is active.
adGenGponPonHwFailureAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.41
This trap indicates that PON Hardware Failure alarm has cleared.
adGenGponPonHwFailureAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.42
This trap indicates that PON Hardware Failure alarm has set
adGenGponPonDegradationAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.43
This trap indicates that PON Degredation alarm has cleared
adGenGponPonDegradationAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.44
This trap indicates that PON Degredation alarm has set
adGenGponOntClrDyingGaspAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.45
This trap indicates that ONT Dying Gasp alarm has cleared.
adGenGponOntSetDyingGaspAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.46
This trap indicates that ONT is powering off imminently.
adGenGponOntClrPoweringAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.5
This trap indicates that ONT Powering alarm mode has cleared.
adGenGponOntSetPoweringAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.6
This trap indicates that ONT Powering alarm mode has set.
adGenGponOntClrBatteryMissingAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.7
This trap indicates that ONT Battery Missing alarm mode has cleared.
adGenGponOntSetBatteryMissingAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.8
This trap indicates that ONT Battery Missing alarm mode has set.
adGenGponOntClrBatteryFailureAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.9
This trap indicates that ONT Battery Failure alarm mode has cleared.
adGenGponOntClrLanLOSAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.1
This trap indicates that GPON ONT ethernet port Lan LOS alarm mode has cleared.
adGenGponOntPortSetLanLOSAlarm
.1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.2
This trap indicates that GPON ONT ethernet port Lan LOS alarm mode has set.
adGenGponOntVideoPortLOSAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.3
This trap indicates that GPON ONT video port LOS alarm mode has cleared.
adGenGponOntVideoPortLOSAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.4
This trap indicates that GPON ONT video port LOS alarm mode has set.
adGenGponOntVideoPortOORLowAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.5
This trap indicates that GPON ONT video port OOR Low alarm mode has cleared.
adGenGponOntVideoPortOORLowAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.6
This trap indicates that GPON ONT video port OOR Low alarm mode has set.
adGenGponOntVideoPortOORHighAlarmClear
.1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.7
This trap indicates that GPON ONT video port OOR High alarm mode has cleared.
adGenGponOntVideoPortOORHighAlarmSet
.1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.8
This trap indicates that GPON ONT video port OOR High alarm mode has set.