Far End Config Insufficient Links - Cleared.
The far end IMAgroup has sufficient links in
the Active state to be in the Operational state.
adGenImaGroupFeCfgInsufficentLinksAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.11
Far End Config Insufficient Links - Active.
The far end IMA group does not have sufficient links in
the Active state to be in the Operational state.
adGenImaGroupFeBlockedClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.12
Far End Blocked - Cleared. The far end
IMA group is no longer inhibited.
adGenImaGroupFeBlockedAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.13
Far End Blocked - Active. The far end
IMA group has been inhibited, so this group cannot
become Operational.
adGenImaGroupTimingMismatchClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.14
Config Timing Mismatch - Cleared. The
the far end transmit clock mode is now the same as
the near end transmit clock mode.
adGenImaGroupTimingMismatchAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.15
Config Timing Mismatch - Active. The
the far end transmit clock mode is different than
the near end transmit clock mode.
adGenImaLinkLifClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.16
oss of IMA Frame - Cleared. The link
has acquired IMA framing.
adGenImaLinkLifAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.17
oss of IMA Frame - Active. The link
cannot acquire IMA framing.
adGenImaLinkLodsClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.18
oss of Delay Synch - Cleared. The link
has acquired delay synchronization.
adGenImaLinkLodsAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.19
oss of Delay Synch - Active. The link
cannot acquire delay synchronization.
adGenImaGroupCfgAbortClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.2
Config Abort - Cleared. The group has
accepted the group parameters proposed by the
far end IMA group.
adGenImaLinkRfiClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.20
emote Failure Indication - Cleared. The
far end link no longer reports a link failure.
adGenImaLinkRfiAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.21
emote Failure Indication - Active. The
far end link has reported a link failure.
adGenImaLinkTxMisconnectedClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.22
ransmit Mis-connected - Cleared. The
transmit link is now properly connected.
adGenImaLinkTxMisconnectedAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.23
ransmit Mis-connected - Active. A
mis-connection has been detected for the transmit
link. The link is not connected to the same far
end IMA group as the other links in the group.
adGenImaLinkRxMisconnectedClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.24
eceive Mis-connected - Cleared. The
receive link is now properly connected.
adGenImaLinkRxMisconnectedAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.25
eceive Mis-connected - Active. A
mis-connection has been detected for the receive
link. The link is not connected to the same far
end IMA group as the other links in the group.
adGenImaLinkTxFaultClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.26
ransmit Fault - Cleared. The transmit
fault is no longer detected at the near end.
adGenImaLinkTxFaultAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.27
ransmit Fault - Active. A transmit
fault has been detected at the near end.
adGenImaLinkRxFaultClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.28
eceive Fault - Cleared. The receive
fault is no longer detected at the near end.
adGenImaLinkRxFaultAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.29
eceive Fault - Active. A receive
fault has been detected at the near end.
adGenImaGroupCfgAbortAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.3
Config Abort - Active. The group has
rejected the group parameters proposed by the
far end IMA group.
adGenImaLinkFeTxUnusableClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.30
ar End Transmit Unusable - Cleared.
The far end no longer reports Transmit Unusable.
adGenImaLinkFeTxUnusableAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.31
ar End Transmit Unusable - Active.
The far end reports Transmit Unusable.
adGenImaLinkFeRxUnusableClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.32
ar End Receive Unusable - Cleared.
The far end no longer reports Receive Unusable.
adGenImaLinkFeRxUnusableAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.33
ar End Receive Unusable - Active.
The far end reports Receive Unusable.
adGenImaGroupCfgInsufficentLinksClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.4
Config Insufficient Links - Cleared.
The group has sufficient links in the Active
state to be in the Operational state.
adGenImaGroupCfgInsufficentLinksAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.5
Config Insufficient Links - Active.
The group does not have sufficient links in
the Active state to be in the Operational state.
adGenImaGroupFeStartupClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.6
Far End Startup - Cleared. The far
end IMA group is no longer in the start up state.
adGenImaGroupFeStartupAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.7
Far End Startup - Active. The far
end IMA group is in the start up state.
adGenImaGroupFeCfgAbortClr
.1.3.6.1.4.1.664.5.67.1.25.10.0.8
Config Abort - Cleared. The far end
group has accepted the group parameters proposed
by the IMA group.
adGenImaGroupFeCfgAbortAct
.1.3.6.1.4.1.664.5.67.1.25.10.0.9
Config Abort - Active. The far end
group has rejected the group parameters proposed
by the IMA group.
adGenImaProvisioning 
adGenImaGroupProvTable 
adGenImaGroupProvEntry 
adGenImaGroupVersion 
adGenImaGroupFeCfgInsufficentLinksClr