ADTRAN-GEN-MONITOR-SESSION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
11
.1.3.6.1.4.1.664.5.70.61.1.1 · 1 row entry · 4 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMonitorSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-MONITOR-SESSION-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-MONITOR-SESSION-MIB::adGenMonitorSessionTable'
Monitor Session Provisioning table.
adGenMonitorSessionEntry row .1.3.6.1.4.1.664.5.70.61.1.1.1
An entry in Monitor Session provisioning Table. Monitor Session entries
are uniquely identified by their ID and Slot on which it is created.
Column Syntax OID
Displays Monitor Session Number(ID).
Integer32
Constraints:
range: 1-1
.1.3.6.1.4.1.664.5.70.61.1.1.1.1
This object is used to control the Administrative State of
the Monitor Session.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.664.5.70.61.1.1.1.2
This string describes the last error experienced
for this particular entry in the table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.664.5.70.61.1.1.1.3
This object is used to create a new row or modify or delete an
existing row in this table.Setting this value to ?createAndWait? creates
the new Monitor Session and setting this value to ?destroy? removes the
Monitor S…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.664.5.70.61.1.1.1.4
.1.3.6.1.4.1.664.5.70.61.1.2 · 1 row entry · 4 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMonitorSessionSrcProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-MONITOR-SESSION-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-MONITOR-SESSION-MIB::adGenMonitorSessionSrcProvTable'
Monitor Session Source Provisioning table.
adGenMonitorSessionSrcProvEntry row .1.3.6.1.4.1.664.5.70.61.1.2.1
An entry in Monitor Session Source Table. This table can be
used to add or remove Source Ports for Monitor Session.
The first index is adGenSlotInfoIndex to identify the Slot on which Monitor
Session is created. The sec…
Column Syntax OID
Identifies the interface index of the Source port to be connected to this Monitor Session.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.664.5.70.61.1.2.1.1
Provision for the traffic direction of source interface :
rx(0) - Monitor traffic received (ingress) on this port ,
tx(1) - Monitor traffic transmitted (egress) on this port ,
both(2) - Monitor all traffic on this po…
Enumerationr/w
Enumerated Values:
0rx
1tx
2both
.1.3.6.1.4.1.664.5.70.61.1.2.1.2
This string describes the last error experienced
for this particular entry in the table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.664.5.70.61.1.2.1.3
This object is used to create a new row or modify or delete an
existing row in this table.Setting this value to ?createAndGo?
and 'createAndWait' adds the source port to the Monitor Session
and setting this value to ?d…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.664.5.70.61.1.2.1.4
.1.3.6.1.4.1.664.5.70.61.1.3 · 1 row entry · 3 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMonitorSessionDestProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-MONITOR-SESSION-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-MONITOR-SESSION-MIB::adGenMonitorSessionDestProvTable'
Monitor Session Destination Provisioning table.
adGenMonitorSessionDestProvEntry row .1.3.6.1.4.1.664.5.70.61.1.3.1
An entry in Monitor Session Destination Table. This table can be
used to add or remove Destination Port for Monitor Session.
The first index is adGenSlotInfoIndex to identify the Slot on which Monitor
Session is create…
Column Syntax OID
Identifies the interface index of the Destination port to be
connected to this Monitor Session.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.664.5.70.61.1.3.1.1
This string describes the last error experienced
for this particular entry in the table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.664.5.70.61.1.3.1.2
This object is used to create a new row or delete an
existing row in this table.Setting this value to ?createAndGo? and
'createAndWait'adds the destination port to the Monitor Session and
setting this value to ?destro…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.664.5.70.61.1.3.1.3