ADTRAN-GEN-FRAME-RELAY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
176

adGenFrGroupTable

table
.1.3.6.1.4.1.664.5.70.29.1.1.2 · 1 row entry · 16 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrGroupTable' 
This table provides provisioning and status information
on all frame relay groups / bearer channels.
adGenFrGroupEntry row .1.3.6.1.4.1.664.5.70.29.1.1.2.1
The Frame Relay Group provisioning and status table entry. To
create a frame relay group, the following procedures are used:

(1) The management application creates Frame Relay Group
entry in the adGenF…
Indexes
Column Syntax OID
adGenFrGroupRowStatus
The adGenFrGroupRowStatus object allows create, change, and
delete operations on the Frame Relay Group / Bearer Channel.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.1
adGenFrGroupStatusString
The reason, if any, why the why the group is not in an
operational state due to provisioning or hardware limitations.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.2
adGenFrGroupAdminStatus
The desired state of the frame relay group. This object
must be set to up(1) or testing(3) to enable user data
transmission on PVCs of this group and for enabling of
any signaling protocol for this group.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.3
adGenFrGroupLmiType
The value of this object identifies the local in-channel signaling
protocol that is used for this frame relay UNI/NNI logical port.
Enumerationr/w
Enumerated Values:
1none
3ansi617d1994
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.5
adGenFrGroupLmiStatus
The value of this object identifies status of local in-channel signaling
protocol. If the signaling protocol is 'none', then this object will
report 'up'.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.6
adGenFrGroupLmiEnquiryIn
The number of Status Enquiry messages received. If the logical
port is not performing network-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.7
adGenFrGroupLmiEnquiryOut
The number of Status Enquiry messages transmitted. If the logical
port is not performing user-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.8
adGenFrGroupLmiStatusIn
The number of Status messages received. If the logical port
is not performing user-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.9
adGenFrGroupLmiStatusOut
The number of Status messages transmitted. If the logical port
is not performing network-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.10
adGenFrGroupLmiInvalidIn
The number of invalid LMI messages received by this logical port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.11
adGenFrGroupLmiStatusEnqTimeouts
The number of times this logical port has failed to receive a
Status Enquiry message in T392 seconds. If the logical port is
not performing network-side or bidirectional procedures then this
object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.12
adGenFrGroupLmiStatusTimeouts
The number of times this logical port has failed to receive a
Status message in a polling interval (within T391 seconds). If
the logical port is not performing user-side or bidirectional
procedures then this object is …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.13
adGenFrGroupClearCounters
Writing a value of 1 will reset the interface and signaling
statistics for this logical port.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.14
adGenFrGroupClearPmHistory
Writing a value of 1 will reset the interface performance
monitoring statistics/intervals for this logical port.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.15
adGenFrGroupLinkLastCreateError
The reason for the last error that occurred while attempting to
create an entry in the Frame Relay Link Table (adGenFrLinkTable)
for this specific frame relay group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.16
adGenFrGroupPvcLastCreateError
The reason for the last error that occurred while attempting to
create an entry in the Frame Relay PVC Table (adGenFrPVCTable)
for this specific frame relay group.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.1.2.1.17

adGenFrGroupCurrentTable

table
.1.3.6.1.4.1.664.5.70.29.1.1.3 · 1 row entry · 16 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrGroupCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrGroupCurrentTable' 
The FR Group current table contains performance
monitoring data for the current 15-minute interval.
adGenFrGroupCurrentEntry row .1.3.6.1.4.1.664.5.70.29.1.1.3.1
An entry in the FR Group current table
Indexes
Column Syntax OID
adGenFrGroupCurrentInOctets
The number of octets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.1
adGenFrGroupCurrentInPkts
The number of packets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.2
adGenFrGroupCurrentInDiscards
The number of received packets discarded on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.3
adGenFrGroupCurrentInErrors
The number of errored packets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.4
adGenFrGroupCurrentOutOctets
The number of octets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.5
adGenFrGroupCurrentOutPkts
The number of packets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.6
adGenFrGroupCurrentOutDiscards
The number of transmit packets discarded on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.7
adGenFrGroupCurrentOutErrors
The number of errored packets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.8
adGenFrGroupCurrentLmiEnquiryIn
The number of Status Enquiry messages received. If the logical
port is not performing network-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.9
adGenFrGroupCurrentLmiEnquiryOut
The number of Status Enquiry messages transmitted. If the logical
port is not performing user-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.10
adGenFrGroupCurrentLmiStatusIn
The number of Status messages received. If the logical port
is not performing user-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.11
adGenFrGroupCurrentLmiStatusOut
The number of Status messages transmitted. If the logical port
is not performing network-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.12
adGenFrGroupCurrentLmiInvalidIn
The number of invalid LMI messages received by this logical port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.13
adGenFrGroupCurrentLmiStatusEnqTimeouts
The number of times this logical port has failed to receive a
Status Enquiry message in T392 seconds. If the logical port is
not performing network-side or bidirectional procedures then this
object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.14
adGenFrGroupCurrentLmiStatusTimeouts
The number of times this logical port has failed to receive a
Status message in a polling interval (within T391 seconds). If
the logical port is not performing user-side or bidirectional
procedures then this object is …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.15
adGenFrGroupCurrentNetworkInactive
TODO. If
the logical port is not performing user-side or bidirectional
procedures then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.3.1.16

adGenFrGroupIntervalTable

table
.1.3.6.1.4.1.664.5.70.29.1.1.4 · 1 row entry · 18 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrGroupIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrGroupIntervalTable' 
The FR Group Interval Table contains various statistics
collected by each Frame Relay Group over the previous
24 hours of operation. The past 24 hours are broken
into 96 completed 15-minute intervals.  Each row in
this table represents one such interval (identified by
adGenFrGroupIntervalNumber) and for one specific
interface (identifed by ifIndex).
adGenFrGroupIntervalEntry row .1.3.6.1.4.1.664.5.70.29.1.1.4.1
An entry in the FR Group Interval table
Indexes
Column Syntax OID
adGenFrGroupIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15-minute interval and 96 is the least
recently completed 15-minute interval (assuming that all
96 intervals are valid).
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.1
adGenFrGroupIntervalTimeStamp
Timestamp of the 15-minute interval
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.2
adGenFrGroupIntervalInOctets
The number of octets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.3
adGenFrGroupIntervalInPkts
The number of packets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.4
adGenFrGroupIntervalInDiscards
The number of received packets discarded on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.5
adGenFrGroupIntervalInErrors
The number of errored packets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.6
adGenFrGroupIntervalOutOctets
The number of octets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.7
adGenFrGroupIntervalOutPkts
The number of packets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.8
adGenFrGroupIntervalOutDiscards
The number of transmit packets discarded on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.9
adGenFrGroupIntervalOutErrors
The number of errored packets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.10
adGenFrGroupIntervalLmiEnquiryIn
The number of Status Enquiry messages received. If the logical
port is not performing network-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.11
adGenFrGroupIntervalLmiEnquiryOut
The number of Status Enquiry messages transmitted. If the logical
port is not performing user-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.12
adGenFrGroupIntervalLmiStatusIn
The number of Status messages received. If the logical port
is not performing user-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.13
adGenFrGroupIntervalLmiStatusOut
The number of Status messages transmitted. If the logical port
is not performing network-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.14
adGenFrGroupIntervalLmiInvalidIn
The number of invalid LMI messages received by this logical port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.15
adGenFrGroupIntervalLmiStatusEnqTimeouts
The number of times this logical port has failed to receive a
Status Enquiry message in T392 seconds. If the logical port is
not performing network-side or bidirectional procedures then this
object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.16
adGenFrGroupIntervalLmiStatusTimeouts
The number of times this logical port has failed to receive a
Status message in a polling interval (within T391 seconds). If
the logical port is not performing user-side or bidirectional
procedures then this object is …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.17
adGenFrGroupIntervalNetworkInactive
TODO. If
the logical port is not performing user-side or bidirectional
procedures then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.4.1.18

adGenFrGroupDayCurrentTable

table
.1.3.6.1.4.1.664.5.70.29.1.1.5 · 1 row entry · 16 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrGroupDayCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrGroupDayCurrentTable' 
The FR Group current day table contains performance
monitoring data for the current 24-hour interval.
adGenFrGroupDayCurrentEntry row .1.3.6.1.4.1.664.5.70.29.1.1.5.1
An entry in the FR Group current day table
Indexes
Column Syntax OID
adGenFrGroupDayCurrentInOctets
The number of octets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.1
adGenFrGroupDayCurrentInPkts
The number of packets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.2
adGenFrGroupDayCurrentInDiscards
The number of received packets discarded on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.3
adGenFrGroupDayCurrentInErrors
The number of errored packets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.4
adGenFrGroupDayCurrentOutOctets
The number of octets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.5
adGenFrGroupDayCurrentOutPkts
The number of packets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.6
adGenFrGroupDayCurrentOutDiscards
The number of transmit packets discarded on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.7
adGenFrGroupDayCurrentOutErrors
The number of errored packets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.8
adGenFrGroupDayCurrentLmiEnquiryIn
The number of Status Enquiry messages received. If the logical
port is not performing network-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.9
adGenFrGroupDayCurrentLmiEnquiryOut
The number of Status Enquiry messages transmitted. If the logical
port is not performing user-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.10
adGenFrGroupDayCurrentLmiStatusIn
The number of Status messages received. If the logical port
is not performing user-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.11
adGenFrGroupDayCurrentLmiStatusOut
The number of Status messages transmitted. If the logical port
is not performing network-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.12
adGenFrGroupDayCurrentLmiInvalidIn
The number of invalid LMI messages received by this logical port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.13
adGenFrGroupDayCurrentLmiStatusEnqTimeouts
The number of times this logical port has failed to receive a
Status Enquiry message in T392 seconds. If the logical port is
not performing network-side or bidirectional procedures then this
object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.14
adGenFrGroupDayCurrentLmiStatusTimeouts
The number of times this logical port has failed to receive a
Status message in a polling interval (within T391 seconds). If
the logical port is not performing user-side or bidirectional
procedures then this object is …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.15
adGenFrGroupDayCurrentNetworkInactive
TODO. If
the logical port is not performing user-side or bidirectional
procedures then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.5.1.16

adGenFrGroupDayIntervalTable

table
.1.3.6.1.4.1.664.5.70.29.1.1.6 · 1 row entry · 18 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrGroupDayIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrGroupDayIntervalTable' 
The FR Group Day Interval Table contains various statistics
collected by each Frame Relay Group over the previous 7 days of
operation.  The past 7 days are broken into completed 24-hour
intervals.  Each row in this table represents one such interval
(identified by adGenFrGroupDayIntervalNumber) and for one specific
interface (identifed by ifIndex).
adGenFrGroupDayIntervalEntry row .1.3.6.1.4.1.664.5.70.29.1.1.6.1
An entry in the FR Group Interval table
Indexes
Column Syntax OID
adGenFrGroupDayIntervalNumber
A number between 1 and 7, where 1 is the most
recently completed 24-hour interval and 96 is the least
recently completed 24-hour interval (assuming that all
7 intervals are valid).
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.1
adGenFrGroupDayIntervalTimeStamp
Timestamp of the 15-minute interval
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.2
adGenFrGroupDayIntervalInOctets
The number of octets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.3
adGenFrGroupDayIntervalInPkts
The number of packets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.4
adGenFrGroupDayIntervalInDiscards
The number of received packets discarded on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.5
adGenFrGroupDayIntervalInErrors
The number of errored packets received on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.6
adGenFrGroupDayIntervalOutOctets
The number of octets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.7
adGenFrGroupDayIntervalOutPkts
The number of packets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.8
adGenFrGroupDayIntervalOutDiscards
The number of transmit packets discarded on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.9
adGenFrGroupDayIntervalOutErrors
The number of errored packets transmitted on the FR Group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.10
adGenFrGroupDayIntervalLmiEnquiryIn
The number of Status Enquiry messages received. If the logical
port is not performing network-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.11
adGenFrGroupDayIntervalLmiEnquiryOut
The number of Status Enquiry messages transmitted. If the logical
port is not performing user-side or bidirectional procedures
then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.12
adGenFrGroupDayIntervalLmiStatusIn
The number of Status messages received. If the logical port
is not performing user-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.13
adGenFrGroupDayIntervalLmiStatusOut
The number of Status messages transmitted. If the logical port
is not performing network-side or bidirectional procedures then
this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.14
adGenFrGroupDayIntervalLmiInvalidIn
The number of invalid LMI messages received by this logical port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.15
adGenFrGroupDayIntervalLmiStatusEnqTimeouts
The number of times this logical port has failed to receive a
Status Enquiry message in T392 seconds. If the logical port is
not performing network-side or bidirectional procedures then this
object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.16
adGenFrGroupDayIntervalLmiStatusTimeouts
The number of times this logical port has failed to receive a
Status message in a polling interval (within T391 seconds). If
the logical port is not performing user-side or bidirectional
procedures then this object is …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.17
adGenFrGroupDayIntervalNetworkInactive
TODO. If
the logical port is not performing user-side or bidirectional
procedures then this object is not applicable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.1.6.1.18

adGenFrLinkTable

table
.1.3.6.1.4.1.664.5.70.29.1.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrLinkTable' 
This table provides provisioning and status information
on all frame relay links.
adGenFrLinkEntry row .1.3.6.1.4.1.664.5.70.29.1.2.2.1
The Frame Relay Link provisioning and status table entry.
Indexes
Column Syntax OID
adGenFrLinkGroupIfIndex
This object represents the frame relay group to which
this frame relay link is to be connected.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.664.5.70.29.1.2.2.1.1
adGenFrLinkIfIndex
This object represents the physical T1/E1 link to which
this frame relay link is to constructed from.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.664.5.70.29.1.2.2.1.2
adGenFrLinkBundleId
This object represents the ds0 bundle ID number for this
frame relay link. Some hardware implementations will
only support a single ds0 bundle per T1/E1 link. For
implementations with this limitation, the bundle ID ma…
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.664.5.70.29.1.2.2.1.3
adGenFrLinkRowStatus
The adGenFrLinkRowStatus object allows create, change, and
delete operations on the Frame Relay link.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.664.5.70.29.1.2.2.1.4
adGenFrLinkTimeslots
The adGenFrLinkTimeslots is a string representation of
the timeslot or timeslot range that describes the active
ds0's for this link.

For example:

To indicate that timeslots 3 through 8 are …
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.2.2.1.5
adGenFrLinkStatusString
The reason, if any, why the frame relay link is
not in an operational state due to provisioning or
hardware limitations.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.2.2.1.7

adGenFrPVCTable

table
.1.3.6.1.4.1.664.5.70.29.1.3.4 · 1 row entry · 23 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrPVCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrPVCTable' 
This table provides provisioning and status information
on all frame relay virtual circuits (PVCs).
adGenFrPVCEntry row .1.3.6.1.4.1.664.5.70.29.1.3.4.1
The Frame Relay PVC supplemental provisioning and status
table entry. To create a Frame Relay PVC, the following
procedures are used:

(1) The management application creates Frame Relay PVC by
creatin…
Indexes
Column Syntax OID
adGenFrPVCIfIndex
The value of this object is equal to the ifIndex
value for this PVC end-point.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.1
adGenFrPVCDLCIIndex
The value of this object is equal to the DLCI
value for this PVC end-point.

The values are restricted to the legal range for
the size of address field supported by the
application which is currently 10-bi…
Integer32
Constraints:
range: 16-991
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.2
adGenFrPVCStatusString
The reason, if any, why the why the PVC is not in an
operational state due to provisioning or hardware limitations.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.3
adGenFrPVCAdminStatus
The desired state of the frame relay PVC. This object
must be set to up(1) or testing(3) to enable user data
transmission on the PVC.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.4
adGenFrPVCState
This object provides the operation state information of
the PVC.
Enumeration
Enumerated Values:
1new
2none
3active
4inactive
5deleted
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.5
adGenFrPVCEncapsulation
The network protocol encapsulated on this frame relay PVC.
Enumerationr/w
Enumerated Values:
1ipv4
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.6
adGenFrPVCPrimaryPeerIpAddressType
IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCPrimaryPeerIpAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.7
adGenFrPVCPrimaryPeerIpAddress
Provisioned Primary Peer IP address. If this object
is set to a valid non-zero IP address and Inverse ARP
is enabled, the address much match that learned from
the Inverse ARP protocol. If they do not match, nor
does t…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.8
adGenFrPVCSecondaryPeerAddressType
IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCSecondaryPeerIpAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.9
adGenFrPVCSecondaryPeerIpAddress
Provisioned Secondary Peer IP address. If this object
is set to a valid non-zero IP address and Inverse ARP
is enabled, the address much match that learned from
the Inverse ARP protocol. If they do not match, nor
does…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.10
adGenFrPVCPrimaryGatewayAddressType
IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCPrimaryGatewayAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.11
adGenFrPVCPrimaryGatewayAddress
The primary gateway IP address for the peer. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.12
adGenFrPVCInverseArpEnable
Setting this value to true enables transmission of Inverse ARP
requests by this frame relay PVC. If the encapsulation protocol
is not ipv4, this oid has no effect. Note that if InARP request
transmissions are disable…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.19
adGenFrPVCLearnedPrimaryPeerIpAddressType
Learned IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCLearnedPrimaryPeerIpAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.20
adGenFrPVCLearnedPrimaryPeerIpAddress
Learned Primary Peer IP address. This value
is learned through the Inverse ARP protocol mechanism.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.21
adGenFrPVCLearnedSecondaryPeerAddressType
Learned IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCLearnedSecondaryPeerIpAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.22
adGenFrPVCLearnedSecondaryPeerIpAddress
Learned Secondary Peer IP address. This value
is learned through the Inverse ARP protocol mechanism.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.23
adGenFrPVCClearCounters
Writing a value of 1 will reset the PVC statistics for
this logical port.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.24
adGenFrPVCClearPmHistory
Writing a value of 1 will reset the interface performance
monitoring statistics/intervals for this logical port.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.25
adGenFrPVCOperStatus
The current operational state of the PVC.
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5dormant
6notPresent
7lowerLayerDown
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.26
adGenFrPVCLastChange
The value of sysUpTime at the time the PVC
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network management subsystem, then this
object contain…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.27
adGenFrPVCDescription
A descriptive name for the PVC
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.28
adGenFrPVCMtu
The size of the largest packet which can be
sent/received on the interface, specified in octets.
For a PVC, this is the size of the frame relay payload
and does not count the HDLC start/end flags, Frame Relay
address fi…
OctetsInteger32r/w
Constraints:
range: 262-1600
 .1.3.6.1.4.1.664.5.70.29.1.3.4.1.29

adGenFrPVCCurrentTable

table
.1.3.6.1.4.1.664.5.70.29.1.3.5 · 1 row entry · 14 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrPVCCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrPVCCurrentTable' 
The FR PVC current table contains performance
monitoring data for the current 15-minute interval.
adGenFrPVCCurrentEntry row .1.3.6.1.4.1.664.5.70.29.1.3.5.1
An entry in the FR PVC Current table
Indexes
Column Syntax OID
adGenFrPVCCurrentInOctets
The number of octets received on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.1
adGenFrPVCCurrentInPkts
The number of packets received on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.2
adGenFrPVCCurrentInDiscards
The number of received packets discarded on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.3
adGenFrPVCCurrentOutOctets
The number of octets transmitted on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.5
adGenFrPVCCurrentOutPkts
The number of packets transmitted on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.6
adGenFrPVCCurrentOutDiscards
The number of transmit packets discarded on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.7
adGenFrPVCCurrentPktsFECN1In
The number of packets received with the Forward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.9
adGenFrPVCCurrentPktsFECN1Out
The number of packets transmitted with the Forward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.10
adGenFrPVCCurrentPktsBECN1In
The number of packets received with the Backward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.11
adGenFrPVCCurrentPktsBECN1Out
The number of packets transmitted with the Backward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.12
adGenFrPVCCurrentPktsDE1In
The number of packets received with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.13
adGenFrPVCCurrentPktsDE1Out
The number of packets transmitted with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.14
adGenFrPVCCurrentOctetsDE1In
The number of octets received with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.15
adGenFrPVCCurrentOctetsDE1Out
The number of octets transmitted with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.5.1.16

adGenFrPVCIntervalTable

table
.1.3.6.1.4.1.664.5.70.29.1.3.6 · 1 row entry · 16 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrPVCIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrPVCIntervalTable' 
The FR PVC Interval Table contains various statistics
collected by each Frame Relay PVC over the previous
24 hours of operation. The past 24 hours are broken
into 96 completed 15-minute intervals.  Each row in
this table represents one such interval (identified by
adGenFrPVCIntervalNumber) and for one specific
interface (identifed by ifIndex and
adGenFrPVCDLCIIndex).
adGenFrPVCIntervalEntry row .1.3.6.1.4.1.664.5.70.29.1.3.6.1
An entry in the FR PVC Interval table
Indexes
Column Syntax OID
adGenFrPVCIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15-minute interval and 96 is the least
recently completed 15-minute interval (assuming that all
96 intervals are valid).
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.1
adGenFrPVCIntervalTimeStamp
Timestamp of the 15-minute interval
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.2
adGenFrPVCIntervalInOctets
The number of octets received on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.3
adGenFrPVCIntervalInPkts
The number of packets received on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.4
adGenFrPVCIntervalInDiscards
The number of received packets discarded on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.5
adGenFrPVCIntervalOutOctets
The number of octets transmitted on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.7
adGenFrPVCIntervalOutPkts
The number of packets transmitted on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.8
adGenFrPVCIntervalOutDiscards
The number of transmit packets discarded on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.9
adGenFrPVCIntervalPktsFECN1In
The number of packets received with the Forward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.11
adGenFrPVCIntervalPktsFECN1Out
The number of packets transmitted with the Forward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.12
adGenFrPVCIntervalPktsBECN1In
The number of packets received with the Backward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.13
adGenFrPVCIntervalPktsBECN1Out
The number of packets transmitted with the Backward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.14
adGenFrPVCIntervalPktsDE1In
The number of packets received with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.15
adGenFrPVCIntervalPktsDE1Out
The number of packets transmitted with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.16
adGenFrPVCIntervalOctetsDE1In
The number of octets received with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.17
adGenFrPVCIntervalOctetsDE1Out
The number of octets transmitted with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.6.1.18

adGenFrPVCDayCurrentTable

table
.1.3.6.1.4.1.664.5.70.29.1.3.7 · 1 row entry · 14 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrPVCDayCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrPVCDayCurrentTable' 
The FR PVC current day table contains performance
monitoring data for the current 24-hour interval.
adGenFrPVCDayCurrentEntry row .1.3.6.1.4.1.664.5.70.29.1.3.7.1
An entry in the FR PVC current day table
Indexes
Column Syntax OID
adGenFrPVCDayCurrentInOctets
The number of octets received on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.1
adGenFrPVCDayCurrentInPkts
The number of packets received on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.2
adGenFrPVCDayCurrentInDiscards
The number of received packets discarded on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.3
adGenFrPVCDayCurrentOutOctets
The number of octets transmitted on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.5
adGenFrPVCDayCurrentOutPkts
The number of packets transmitted on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.6
adGenFrPVCDayCurrentOutDiscards
The number of transmit packets discarded on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.7
adGenFrPVCDayCurrentPktsFECN1In
The number of packets received with the Forward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.9
adGenFrPVCDayCurrentPktsFECN1Out
The number of packets transmitted with the Forward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.10
adGenFrPVCDayCurrentPktsBECN1In
The number of packets received with the Backward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.11
adGenFrPVCDayCurrentPktsBECN1Out
The number of packets transmitted with the Backward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.12
adGenFrPVCDayCurrentPktsDE1In
The number of packets received with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.13
adGenFrPVCDayCurrentPktsDE1Out
The number of packets transmitted with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.14
adGenFrPVCDayCurrentOctetsDE1In
The number of octets received with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.15
adGenFrPVCDayCurrentOctetsDE1Out
The number of octets transmitted with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.7.1.16

adGenFrPVCDayIntervalTable

table
.1.3.6.1.4.1.664.5.70.29.1.3.8 · 1 row entry · 16 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrPVCDayIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrPVCDayIntervalTable' 
The FR PVC Day Interval Table contains various statistics
collected by each Frame Relay PVC over the previous
7 days of operation. The past 7 days are broken
into completed 24-hour intervals.  Each row in
this table represents one such interval (identified by
adGenFrPVCIntervalNumber) and for one specific
interface (identifed by ifIndex and
adGenFrPVCDLCIIndex).
adGenFrPVCDayIntervalEntry row .1.3.6.1.4.1.664.5.70.29.1.3.8.1
An entry in the FR PVC Day Interval table
Indexes
Column Syntax OID
adGenFrPVCDayIntervalNumber
A number between 1 and 7, where 1 is the most
recently completed 24-hour interval and 96 is the least
recently completed 24-hour interval (assuming that all
7 intervals are valid).
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.1
adGenFrPVCDayIntervalTimeStamp
Timestamp of the 15-minute interval
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.2
adGenFrPVCDayIntervalInOctets
The number of octets received on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.3
adGenFrPVCDayIntervalInPkts
The number of packets received on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.4
adGenFrPVCDayIntervalInDiscards
The number of received packets discarded on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.5
adGenFrPVCDayIntervalOutOctets
The number of octets transmitted on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.7
adGenFrPVCDayIntervalOutPkts
The number of packets transmitted on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.8
adGenFrPVCDayIntervalOutDiscards
The number of transmit packets discarded on the FR PVC.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.9
adGenFrPVCDayIntervalPktsFECN1In
The number of packets received with the Forward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.11
adGenFrPVCDayIntervalPktsFECN1Out
The number of packets transmitted with the Forward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.12
adGenFrPVCDayIntervalPktsBECN1In
The number of packets received with the Backward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.13
adGenFrPVCDayIntervalPktsBECN1Out
The number of packets transmitted with the Backward Explicit
Congestion Notification bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.14
adGenFrPVCDayIntervalPktsDE1In
The number of packets received with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.15
adGenFrPVCDayIntervalPktsDE1Out
The number of packets transmitted with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.16
adGenFrPVCDayIntervalOctetsDE1In
The number of octets received with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.17
adGenFrPVCDayIntervalOctetsDE1Out
The number of octets transmitted with the Discard Eligible
bit set to 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.3.8.1.18

adGenFrSlotTable

table
.1.3.6.1.4.1.664.5.70.29.1.4.1 · 1 row entry · 3 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenFrSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-FRAME-RELAY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-FRAME-RELAY-MIB::adGenFrSlotTable' 
This table provides frame relay group/bearer channel
and PVC slot specific information.
adGenFrSlotEntry row .1.3.6.1.4.1.664.5.70.29.1.4.1.1
Slot specific Frame Relay Group information.
Indexes
Column Syntax OID
adGenFrSlotGroupLastCreateError
The reason for the last error that occurred while attempting to
create an entry in the Frame Relay Group Table (adGenFrGroupTable)
on a specific slot.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.70.29.1.4.1.1.1
adGenFrSlotPVCMaxNumber
Maximum number of allowed Frame Relay PVCs on this slot. Each access
module provides a pool of available PVC resources that may
be assigned to any Frame Relay Group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.4.1.1.2
adGenFrSlotPVCCurrentNumber
The current number of Frame Relay PVC resources currently in
use on this slot. Each access module provides a pool of available PVC
resources that may be assigned to any Frame Relay Group. This
object reports the numbe…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.29.1.4.1.1.3