ADTRAN-AOS-NETWORK-SYNC-MIB

        The MIB module defines Network Sync configuration information and traps for AdtranOS products.
    
Source file
ADTRAN-AOS-NETWORK-SYNC-MIB
Last revised
Identity
adGenAOSNetSyncMib
Base OID
1.3.6.1.4.1.664.6.10000.53.1.9
Imported Objects
ADTRAN-AOS adGenAOSCommon adGenAOSConformance
ADTRAN-MIB adIdentity
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the adtran MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ADTRAN-AOS-NETWORK-SYNC-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ADTRAN-AOS-NETWORK-SYNC-MIB::adGenAOSNetSyncMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-AOS-NETWORK-SYNC-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-AOS-NETWORK-SYNC-MIB::adGenAOSNetSyncMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (13)
.1.3.6.1.4.1.664.5.53.1.9
.1.3.6.1.4.1.664.5.53.1.9.0
.1.3.6.1.4.1.664.5.53.1.9.1
Enumeration
.1.3.6.1.4.1.664.5.53.1.9.1.1
.1.3.6.1.4.1.664.5.53.1.9.2
Enumeration
.1.3.6.1.4.1.664.5.53.1.9.2.1
Enumeration
.1.3.6.1.4.1.664.5.53.1.9.2.2
.1.3.6.1.4.1.664.5.53.1.9.2.3
Enumeration
.1.3.6.1.4.1.664.5.53.1.9.2.4
.1.3.6.1.4.1.664.5.53.99.18
.1.3.6.1.4.1.664.5.53.99.18.1
.1.3.6.1.4.1.664.5.53.99.18.2
.1.3.6.1.4.1.664.6.10000.53.1.9
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. ADTRAN-MIBadtran
  5. ADTRAN-AOSadtran
  6. ADTRAN-AOS-NETWORK-SYNC-MIBadtranselected
Conformance Groups (3)
This group contains the objects necessary to enable/disable
NetSync failure traps.
.1.3.6.1.4.1.664.5.53.99.18.1.1
The objects necessary to control NetSync notification messages.
.1.3.6.1.4.1.664.5.53.99.18.1.2
Traps which may be used to enhance event driven
management of the chassis's Network Sync.
.1.3.6.1.4.1.664.5.53.99.18.1.3
Compliance Statements (1)

OID .1.3.6.1.4.1.664.5.53.99.18.2.1
The compliance statement for SNMP entities which implement
version 2 of the adGenAosNetSync MIB. When this MIB is implemented
with support for read-write, then such an implementation can claim
full compliance.
Required groups
optional adGenAOSNetSyncTrapCfgGroup A collection of objects providing configuration for the Network Sync trap.
optional adGenAOSNetSyncTrapGroup This group is used for the management of
asynchronous notifications of Network Sync traps.
optional adGenAOSNetSyncNotificationGroup This optional group defines the asynchronous
notifications generated by Network Sync traps.
Notifications / Traps (3)
NameOIDDescription
.1.3.6.1.4.1.664.5.53.1.9.0.1
A Network Sync trap signifies a change in clock defect status.
.1.3.6.1.4.1.664.5.53.1.9.0.2
A Network Sync trap signifies a change in Loss of timing state.
.1.3.6.1.4.1.664.5.53.1.9.0.3
A Network Sync trap signifies a change in T4 interface squelch state.