ADSL-LINE-EXT-MIB Table View

This table is an extension of RFC 2662.  It
contains ADSL line configuration and
monitoring information. This includes the ADSL
line's capabilities and actual ADSL transmission
system.

adslLineExtEntry row .1.3.6.1.2.1.10.94.3.1.17.1

An entry extends the adslLineEntry defined in
[RFC2662]. Each entry corresponds to an ADSL
line.

Indexes

No indexes recorded

Column	Syntax	OID
adslLineTransAtucCap The transmission modes, represented by a bitmask that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment.	AdslTransmissionModeType Type Values: 0 ansit1413 1 etsi 2 q9921PotsNonOverlapped 3 q9921PotsOverlapped 4 q9921IsdnNonOverlapped 5 q9921isdnOverlapped 6 q9921tcmIsdnNonOverlapped 7 q9921tcmIsdnOverlapped 8 q9922potsNonOverlapeed 9 q9922potsOverlapped 10 q9922tcmIsdnNonOverlapped 11 q9922tcmIsdnOverlapped 12 q9921tcmIsdnSymmetric	.1.3.6.1.2.1.10.94.3.1.17.1.1
adslLineTransAtucConfig The transmission modes, represented by a bitmask, currently enabled by the ATU-C. The manager can only set those modes that are supported by the ATU-C. An ATU-C's supported modes are provided by AdslLin…	AdslTransmissionModeTyper/w Type Values: 0 ansit1413 1 etsi 2 q9921PotsNonOverlapped 3 q9921PotsOverlapped 4 q9921IsdnNonOverlapped 5 q9921isdnOverlapped 6 q9921tcmIsdnNonOverlapped 7 q9921tcmIsdnOverlapped 8 q9922potsNonOverlapeed 9 q9922potsOverlapped 10 q9922tcmIsdnNonOverlapped 11 q9922tcmIsdnOverlapped 12 q9921tcmIsdnSymmetric	.1.3.6.1.2.1.10.94.3.1.17.1.2
adslLineTransAtucActual The actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode used for the link. This value will be limited a single transmis…	AdslTransmissionModeType Type Values: 0 ansit1413 1 etsi 2 q9921PotsNonOverlapped 3 q9921PotsOverlapped 4 q9921IsdnNonOverlapped 5 q9921isdnOverlapped 6 q9921tcmIsdnNonOverlapped 7 q9921tcmIsdnOverlapped 8 q9922potsNonOverlapeed 9 q9922potsOverlapped 10 q9922tcmIsdnNonOverlapped 11 q9922tcmIsdnOverlapped 12 q9921tcmIsdnSymmetric	.1.3.6.1.2.1.10.94.3.1.17.1.3
adslLineGlitePowerState The value of this object specifies the power state of this interface. L0 is power on, L1 is power on but reduced and L3 is power off. Power state cannot be configured by an operator but it can be viewed via the ifOper…	Enumeration Enumerated Values: 1 none 2 l0 3 l1 4 l3	.1.3.6.1.2.1.10.94.3.1.17.1.4
adslLineConfProfileDualLite This object extends the definition an ADSL line and associated channels (when applicable) for cases when it is configured in dual mode, and operating in a G.Lite-type mode as denoted by adslLineTransAtucActual. Dual mo…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.94.3.1.17.1.5

This table extends adslAtucPerfDataTable [RFC2662]
with additional ADSL physical line counter
information such as unavailable seconds-line and
severely errored seconds-line.

adslAtucPerfDataExtEntry row .1.3.6.1.2.1.10.94.3.1.18.1

An entry extends the adslAtucPerfDataEntry defined
in [RFC2662]. Each entry corresponds to an ADSL
line.

Indexes

No indexes recorded

Column	Syntax	OID
adslAtucPerfStatFastR The value of this object reports the count of the number of fast line bs since last agent reset.	line retrainsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.3.1.18.1.1
adslAtucPerfStatFailedFastR The value of this object reports the count of the number of failed fast line retrains since last agent reset.	line retrainsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.3.1.18.1.2
adslAtucPerfStatSesL The value of this object reports the count of the number of severely errored seconds-line since last agent reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.3.1.18.1.3
adslAtucPerfStatUasL The value of this object reports the count of the number of unavailable seconds-line since last agent reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.3.1.18.1.4
adslAtucPerfCurr15MinFastR For the current 15-minute interval, adslAtucPerfCurr15MinFastR reports the current number of seconds during which there have been fast retrains.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.3.1.18.1.5
adslAtucPerfCurr15MinFailedFastR For the current 15-minute interval, adslAtucPerfCurr15MinFailedFastR reports the current number of seconds during which there have been failed fast retrains.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.3.1.18.1.6
adslAtucPerfCurr15MinSesL For the current 15-minute interval, adslAtucPerfCurr15MinSesL reports the current number of seconds during which there have been severely errored seconds-line.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.3.1.18.1.7
adslAtucPerfCurr15MinUasL For the current 15-minute interval, adslAtucPerfCurr15MinUasL reports the current number of seconds during which there have been unavailable seconds-line.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.3.1.18.1.8
adslAtucPerfCurr1DayFastR For the current day as measured by adslAtucPerfCurr1DayTimeElapsed [RFC2662], adslAtucPerfCurr1DayFastR reports the number of seconds during which there have been fast retrains.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.3.1.18.1.9
adslAtucPerfCurr1DayFailedFastR For the current day as measured by adslAtucPerfCurr1DayTimeElapsed [RFC2662], adslAtucPerfCurr1DayFailedFastR reports the number of seconds during which there have been failed fast retrains.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.3.1.18.1.10
adslAtucPerfCurr1DaySesL For the current day as measured by adslAtucPerfCurr1DayTimeElapsed [RFC2662], adslAtucPerfCurr1DaySesL reports the number of seconds during which there have been severely errored seconds-line.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.3.1.18.1.11
adslAtucPerfCurr1DayUasL For the current day as measured by adslAtucPerfCurr1DayTimeElapsed [RFC2662], adslAtucPerfCurr1DayUasL reports the number of seconds during which there have been unavailable seconds-line.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.3.1.18.1.12
adslAtucPerfPrev1DayFastR For the previous day, adslAtucPerfPrev1DayFastR reports the number of seconds during which there were fast retrains.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.3.1.18.1.13
adslAtucPerfPrev1DayFailedFastR For the previous day, adslAtucPerfPrev1DayFailedFastR reports the number of seconds during which there were failed fast retrains.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.3.1.18.1.14
adslAtucPerfPrev1DaySesL For the previous day, adslAtucPerfPrev1DaySesL reports the number of seconds during which there were severely errored seconds-line.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.3.1.18.1.15
adslAtucPerfPrev1DayUasL For the previous day, adslAtucPerfPrev1DayUasL reports the number of seconds during which there were unavailable seconds-line.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.3.1.18.1.16

This table provides one row for each ATU-C
performance data collection interval for
ADSL physical interfaces whose
IfEntries' ifType is equal to adsl(94).

adslAtucIntervalExtEntry row .1.3.6.1.2.1.10.94.3.1.19.1

An entry in the
adslAtucIntervalExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
adslAtucIntervalFastR For the current interval, adslAtucIntervalFastR reports the current number of seconds during which there have been fast retrains.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.3.1.19.1.1
adslAtucIntervalFailedFastR For the each interval, adslAtucIntervalFailedFastR reports the number of seconds during which there have been failed fast retrains.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.3.1.19.1.2
adslAtucIntervalSesL For the each interval, adslAtucIntervalSesL reports the number of seconds during which there have been severely errored seconds-line.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.3.1.19.1.3
adslAtucIntervalUasL For the each interval, adslAtucIntervalUasL reports the number of seconds during which there have been unavailable seconds-line.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.3.1.19.1.4

This table contains ADSL physical line counters
not defined in the adslAturPerfDataTable
from the ADSL-LINE-MIB [RFC2662].

adslAturPerfDataExtEntry row .1.3.6.1.2.1.10.94.3.1.20.1

An entry extends the adslAturPerfDataEntry defined
in [RFC2662]. Each entry corresponds to an ADSL
line.

Indexes

No indexes recorded

Column	Syntax	OID
adslAturPerfStatSesL The value of this object reports the count of severely errored second-line since the last agent reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.3.1.20.1.1
adslAturPerfStatUasL The value of this object reports the count of unavailable seconds-line since the last agent reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.3.1.20.1.2
adslAturPerfCurr15MinSesL For the current 15-minute interval, adslAturPerfCurr15MinSesL reports the current number of seconds during which there have been severely errored seconds-line.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.3.1.20.1.3
adslAturPerfCurr15MinUasL For the current 15-minute interval, adslAturPerfCurr15MinUasL reports the current number of seconds during which there have been available seconds-line.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.3.1.20.1.4
adslAturPerfCurr1DaySesL For the current day as measured by adslAturPerfCurr1DayTimeElapsed [RFC2662], adslAturPerfCurr1DaySesL reports the number of seconds during which there have been severely errored seconds-line.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.3.1.20.1.5
adslAturPerfCurr1DayUasL For the current day as measured by adslAturPerfCurr1DayTimeElapsed [RFC2662], adslAturPerfCurr1DayUasL reports the number of seconds during which there have been unavailable seconds-line.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.3.1.20.1.6
adslAturPerfPrev1DaySesL For the previous day, adslAturPerfPrev1DaySesL reports the number of seconds during which there were severely errored seconds-line.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.3.1.20.1.7
adslAturPerfPrev1DayUasL For the previous day, adslAturPerfPrev1DayUasL reports the number of seconds during which there were severely errored seconds-line.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.3.1.20.1.8

This table provides one row for each ATU-R
performance data collection interval for
ADSL physical interfaces whose
IfEntries' ifType is equal to adsl(94).

adslAturIntervalExtEntry row .1.3.6.1.2.1.10.94.3.1.21.1

An entry in the
adslAturIntervalExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
adslAturIntervalSesL For the each interval, adslAturIntervalSesL reports the number of seconds during which there have been severely errored seconds-line.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.3.1.21.1.1
adslAturIntervalUasL For the each interval, adslAturIntervalUasL reports the number of seconds during which there have been unavailable seconds-line.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.3.1.21.1.2

The adslConfProfileExtTable extends the ADSL line
profile configuration information in the
adslLineConfProfileTable from the ADSL-LINE-MIB
[RFC2662] by adding the ability to configure the
ADSL physical line mode.

adslConfProfileExtEntry row .1.3.6.1.2.1.10.94.3.1.22.1

An entry extends the adslLineConfProfileEntry
defined in [RFC2662]. Each entry corresponds to an
ADSL line profile.

Indexes

No indexes recorded

Column	Syntax	OID
adslConfProfileLineType This object is used to configure the ADSL physical line mode. It has following valid values: noChannel(1), when no channels exist. fastOnly(2), when only fast channel exists. interleavedOnly(3), when onl…	Enumerationr/w Enumerated Values: 1 noChannel 2 fastOnly 3 interleavedOnly 4 fastOrInterleaved 5 fastAndInterleaved	.1.3.6.1.2.1.10.94.3.1.22.1.1

This table extends the
adslLineAlarmConfProfileTable and provides
threshold parameters for all the counters defined
in this MIB module.

adslAlarmConfProfileExtEntry row .1.3.6.1.2.1.10.94.3.1.23.1

An entry extends the adslLineAlarmConfProfileTable
defined in [RFC2662]. Each entry corresponds to
an ADSL alarm profile.

Indexes

No indexes recorded

Column	Syntax	OID
adslAtucThreshold15MinFailedFastR The first time the value of the corresponding instance of adslAtucPerfCurr15MinFailedFastR reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucFailedFastRThreshTrap not…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.3.1.23.1.1
adslAtucThreshold15MinSesL The first time the value of the corresponding instance of adslAtucPerf15MinSesL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucSesLThreshTrap notification will be g…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.3.1.23.1.2
adslAtucThreshold15MinUasL The first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucUasLThreshTrap notification will be g…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.3.1.23.1.3
adslAturThreshold15MinSesL The first time the value of the corresponding instance of adslAturPerf15MinSesL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAturSesLThreshTrap notification will be g…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.3.1.23.1.4
adslAturThreshold15MinUasL The first time the value of the corresponding instance of adslAturPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAturUasLThreshTrap notific…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.3.1.23.1.5