ACE202-MIB Table View

The SONET Medium table.

prtSonetMediumEntry row .1.3.6.1.4.1.164.3.1.6.2.1.1.1

An entry in the SONET Medium table. ifIndex of the
lowest SONET layer of type sonet(39).

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetMediumTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32	.1.3.6.1.4.1.164.3.1.6.2.1.1.1.1
prtSonetMediumValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.2.1.1.1.2

The SONET Section/Line Current table.

prtSectionLineCurrentEntry row .1.3.6.1.4.1.164.3.1.6.2.1.2.1

An entry in the SONET Section/Line Current table.
ifIndex of the section/line SONET layer of type
sonet(39).

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetCurrentLOS The counter associated with the number of LOS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.1
prtSonetCurrentLOF The counter associated with the number of LOF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.2
prtSonetCurrentLineAIS The counter associated with the number of Line AIS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.3
prtSonetCurrentLineFERF The counter associated with the number of Line FERF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.4
prtSonetCurrentSectionBIP The counter associated with the number of Section BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.5
prtSonetCurrentLineBIP The counter associated with the number of Line BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Enumerated Values: 1 notApplicable 2 rx 3 tx 4 both Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.6
prtSonetCurrentLineFEBE The counter associated with the number of Line FEBE errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Enumerated Values: 1 notApplicable 2 tu2 3 tu3 4 tu11 5 tu12 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.7
prtSonetCurrentUAS The counter associated with the number of UAS encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.8
prtSonetCurrentSES The counter associated with the number of SES encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.9
prtSonetCurrentES The number of Errored Seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-899	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.10
prtSonetCurrentStatus The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.	OctetString Constraints: range: 0-96	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.11
prtSonetCurrentLSV The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.12

The Section/Line Interval table.

prtSectionLineIntervalEntry row .1.3.6.1.4.1.164.3.1.6.2.1.3.1

An entry in the SONET Section/Line Interval table.
ifIndex of the section/line SONET layer of type
sonet(39).

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetLineIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.1
prtSonetIntervalLOS The counter associated with the number of LOS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.2
prtSonetIntervalLOF The counter associated with the number of LOF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.3
prtSonetIntervalLineAIS The counter associated with the number of Line AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.4
prtSonetIntervalLineFERF The counter associated with the number of Line FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.5
prtSonetIntervalSectionBIP The counter associated with the number of Section BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.6
prtSonetIntervalLineBIP The counter associated with the number of Line BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.7
prtSonetIntervalLineFEBE The counter associated with the number of Line FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.8
prtSonetIntervalUAS The counter associated with the number of UAS encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.9
prtSonetIntervalSES The counter associated with the number of SES encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.10
prtSonetIntervalES The number of Errored Seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.11
prtSonetIntervalStatus The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.	OctetString	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.12
prtSonetIntervalLSV The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.13

The SONET Path Current table.

prtPathCurrentEntry row .1.3.6.1.4.1.164.3.1.6.2.1.4.1

An entry in the SONET Path Current table.
ifIndex of the Path SONET layer of type
sonetPath(50).

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetCurrentPathAIS The counter associated with the number of Path AIS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.1
prtSonetCurrentPathFERF The counter associated with the number of Path FERF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.2
prtSonetCurrentLOP The counter associated with the number LOP seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 4-4	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.3
prtSonetCurrentSLM The counter associated with the number of SLM seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.4
prtSonetCurrentLOC The counter associated with the number of LOC seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.5
prtSonetCurrentPathBIP The counter associated with the number of Path BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 1-96	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.6
prtSonetCurrentPathFEBE The counter associated with the number of Path FEBE errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.7

The Path Interval table.

prtPathIntervalEntry row .1.3.6.1.4.1.164.3.1.6.2.1.5.1

An entry in the SONET Path Interval table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetPathIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.1
prtSonetIntervalPathAIS The counter associated with the number of Path AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.2
prtSonetIntervalPathFERF The counter associated with the number of Path FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.3
prtSonetIntervalLOP The counter associated with the number of LOP seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.4
prtSonetIntervalSLM The counter associated with the number of SLM seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.5
prtSonetIntervalLOC The counter associated with the number of LOC seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.6
prtSonetIntervalPathBIP The counter associated with the number of Path BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.7
prtSonetIntervalPathFEBE The counter associated with the number of Path FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.8

Sonet/SDH general port configuration table.

prtSonetGenEntry row .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1

An entry in the Sonet/SDH general port configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetGenCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1
prtSonetGenIdx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2
prtSonetGenSdThreshold SD=Signal Degraded Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 .	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3
prtSonetGenEedThreshold EED=Excessive Error Defect Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 .	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4

Sonet/SDH STM-1 port configuration table.

prtSonetStm1Entry row .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1

An entry in the Sonet/SDH STM-1 port configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetStm1CnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1
prtSonetStm1Idx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2
prtSonetStm1ClockSrc Clock Source of the STM-1 port. lbt = Loop Back Timing.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3
prtSonetStm1DccMode DCC Mode. DCC=Data Communication Channel. d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section).	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4
prtSonetStm1RoutingProt Routing Protocol.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5
prtSonetStm1MngProt Management Protocol over DCC: Proprietary, PPP or Frame Relay.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6

Sonet/SDH VC port configuration table.

prtSonetVcEntry row .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1

An entry in the Sonet/SDH VC port configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetVcCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1
prtSonetVcIdx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2
prtSonetVcJTxPathTraceEnable Enable/Disable Transmitting Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3
prtSonetVcJRxPathTraceEnable Enable/Disable checking Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4
prtSonetVcJPathTrace Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'.	OctetStringr/w	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5
prtSonetVcConnect Connect VCn (n - 11,12,2,3,4) port (yes/no).	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6

The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).

prtSonetTuEntry row .1.3.6.1.4.1.164.3.1.6.2.2.3.2.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetTuCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1
prtSonetTuPrtIdx This object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2
prtSonetTuIdx This object indicates a unique TU (Tributary Unit) within VC-4. The valid TUs are 1..63.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3
prtSonetTuConPrtIdx This object indicates the connected port, when prtSonetTuType=connect. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be indicated as 100.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4
prtSonetTuType The type of TU (Tributary Unit). connect - connected to one of the E1 ports. TUs that are not connected will not exist in this table.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5
prtSonetTuMode TU Mode of connection. addAndDrop - Add & Drop add - Add (TU receives from the E1 ports).	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6
prtSonetTuRowStatus Creation/Deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7

The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).

prtSonetXConnectEntry row .1.3.6.1.4.1.164.3.1.6.2.3.1.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetXConnectCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.1
prtSonetXConnectPrtIdx This object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.2
prtSonetXConnectConPrtIdx This object indicates the connected port. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be indicated as 255.	SNMPv2-SMIInteger32 Constraints: range: 4-4	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.3
prtSonetXConnectAUGIdx This object indicates an AUG (Administrative Unit Group) within STM-N. The valid AUGs values are: 1 for STM-1 1...4 for STM-4, 1..16 for STM-16 and 1..64 for STM-64 (STM-64) 255 designates NA.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.4
prtSonetXConnectTUG3Idx This object indicates a TUG-3 (Tributary Unit Group 3) within VC-4. The valid TUG3s are values are 1..3. and 255 which designates NA	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.5
prtSonetXConnectTUG2Idx This object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3. The valid TUG2's values are 1..7 and 255 which designates NA	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.6
prtSonetXConnectTUnIdx This object indicates a TUn within TUG-2 or TUG-3 (Tributary Unit n, where n is 2, 12 or 11 within TUG-2, or 3 within TUG-3) valid values are 1 for TU-2 1 for TU-3 1..4 for TU-11 1..3 for TU-12 …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.7
prtSonetXConnectRowStatus Creation/Deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.8
prtSonetXConnectDirection TU direction of connection. rx=Drop tx=Add both = Add & Drop	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.9
prtSonetXConnectTuNumber This object indicates which TU is used in prtSonetXConnectTUnIdx	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.10

The DS3 interface table.

prtDs3IfEntry row .1.3.6.1.4.1.164.3.1.6.3.1.1.1

An entry in the DS3 interface table.

Indexes

DS1-MIBdsx1LineIndex

Column	Syntax	OID
prtDs3IfTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32	.1.3.6.1.4.1.164.3.1.6.3.1.1.1.1
prtDs3IfValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Enumerated Values: 1 csu 2 dsu	.1.3.6.1.4.1.164.3.1.6.3.1.1.1.2

The DS3 Current table.

prtDs3CurrentEntry row .1.3.6.1.4.1.164.3.1.6.3.1.2.1

An entry in the DS3 Current table.

Indexes

No indexes recorded

Column	Syntax	OID
prtDs3CurrentLOS The counter associated with the number of LOS seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Enumerated Values: 1 other 2 sec1 3 sec10 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.1
prtDs3CurrentOOF The counter associated with the number of OOF seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.2
prtDs3CurrentLOC The counter associated with the number of LOC seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.3
prtDs3CurrentAIS The counter associated with the number of AIS seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.4
prtDs3CurrentRDI The counter associated with the number of RDI seconds, encountered by a DS3 interface.	SNMPv2-SMIGauge32 Enumerated Values: 1 notApplicable 2 notActive 3 active Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.5
prtDs3CurrentUAS The counter associated with the number of UAS, encountered by a SONET interface.	SNMPv2-SMIGauge32 Enumerated Values: 1 off 2 on Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.6
prtDs3CurrentBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Enumerated Values: 1 loopTiming 2 localTiming 3 throughTiming 4 adaptive Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.7
prtDs3CurrentFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Enumerated Values: 1 notApplicable 2 disable 3 enable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.8
prtDs3CurrentSLM The counter associated with the number of SLM seconds, encountered by an E3 (only ) interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 4-4	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.9
prtDs3CurrentSES The counter associated with the number of SES encountered by a E3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Enumerated Values: 2 notExist 3 exist Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.10
prtDs3CurrentES The number of Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.11
prtDs3CurrentBitParity Bit Parity Error counter. Relevant to T3 only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.12
prtDs3CurrentPlcpLOF The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configur…	SNMPv2-SMIGauge32 Enumerated Values: 1 notApplicable 2 v35 3 x21 4 rs530 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.13
prtDs3CurrentPlcpRAI Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Enumerated Values: 1 notApplicable 2 nx56Kbps 3 nx64Kbps Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.14
prtDs3CurrentPlcpBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Enumerated Values: 1 internal 2 external Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.15
prtDs3CurrentPlcpFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Enumerated Values: 1 dce 2 dte Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.16
prtDs3CurrentBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3.	SNMPv2-SMIGauge32 Enumerated Values: 1 notApplicable 2 internal 3 external 4 disable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.17
prtDs3CurrentLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.	SNMPv2-SMIGauge32 Enumerated Values: 1 normal 2 inverse Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.18
prtDs3CurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.19

The DS3 Interval table.

prtDs3IntervalEntry row .1.3.6.1.4.1.164.3.1.6.3.1.3.1

An entry in the DS3 Interval table.

Indexes

No indexes recorded

Column	Syntax	OID
prtDs3IntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.1
prtDs3IntervalLOS The counter associated with the number of LOS seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Enumerated Values: 1 normal 2 inverse Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.2
prtDs3IntervalOOF The counter associated with the number of OOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.3
prtDs3IntervalLOC The counter associated with the number of LOC seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.4
prtDs3IntervalAIS The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.5
prtDs3IntervalRDI The counter associated with the number of RDI seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Enumerated Values: 1 master 2 fallback Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.6
prtDs3IntervalUAS The counter associated with the number of UAS, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Enumerated Values: 1 none 2 internal 3 rxClk 4 station 5 lbt 6 ntr 7 adaptive 255 notApplicable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.7
prtDs3IntervalBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.8
prtDs3IntervalFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Enumerated Values: 1 notApplicable 2 f1544Khz 3 f2048Khz Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.9
prtDs3IntervalSLM The counter associated with the number of SLM seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.10
prtDs3IntervalSES The counter associated with the number of SES encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.11
prtDs3IntervalES The number of Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.12
prtDs3IntervalBitParity Bit Parity Error counter. Relevant to T3 only.	SNMPv2-SMIGauge32 Enumerated Values: 1 tx 2 rx 3 compress 4 priority 5 loadSharing 6 facs 7 codConnect 8 codDisconnect Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.13
prtDs3IntervalPlcpLOF The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configur…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.14
prtDs3IntervalPlcpRAI Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.15
prtDs3IntervalPlcpBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Enumerated Values: 1 unassigned-cond 2 broadcast-msge 3 multicast-msge 4 all-msge 5 none Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.16
prtDs3IntervalPlcpFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.17
prtDs3IntervalBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.18
prtDs3IntervalLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.	SNMPv2-SMIGauge32 Enumerated Values: 1 mac 2 llc 3 net Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.19
prtDs3IntervalStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.20

A list of Total entries.

prtDs3TotalEntry row .1.3.6.1.4.1.164.3.1.6.3.1.4.1

An entry of Total table.

Indexes

No indexes recorded

Column	Syntax	OID
prtDs3TotalUAS Number of UASs (Unavailable Seconds) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.4.1.6
prtDs3TotalBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Enumerated Values: 1 mac 2 llc 3 net Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.4.1.17
prtDs3TotalLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.4.1.18

A list of current statistics entries.  This table
contains additional objects for the current table.

dsx1XCurrentEntry row .1.3.6.1.4.1.164.3.1.6.4.1.2.1

An entry containing additional statistical counters
applicable to a particular current table.

Indexes

No indexes recorded

Column	Syntax	OID
dsx1CurrentLOS The counter associated with the number of LOS seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.1
dsx1CurrentLOF The counter associated with the number of LOF seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Enumerated Values: 1 mac 2 llc 3 net	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.2
dsx1CurrentLOC Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.3
dsx1CurrentAIS The counter associated with the number of AIS seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Enumerated Values: 1 false 2 true	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.4
dsx1CurrentRAI Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detec…	PerfHist-TC-MIBPerfCurrentCount Enumerated Values: 1 block 2 forward 3 route 4 forward-route 5 high-priority 6 noOp 7 delete	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.5
dsx1CurrentLOMF Loss of Multi-Frame sequence in E1 time slot 16.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.6
dsx1CurrentFEBE Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.7
dsx1CurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.8
dsx1CurrentBPV The counter associated with the number of BPVs (Bi-Polar Violations) encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Enumerated Values: 1 connect 2 disconnect	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.9
dsx1CurrentLOCRCMF Loss of CRC4 Multi-Frame sequence in E1.	PerfHist-TC-MIBPerfCurrentCount Enumerated Values: 1 answer 2 originate 3 disable 4 answerAndOriginate	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.10
dsx1CurrentLOFC Counts the number of loss of frame events measured. encountered in the current 15 minute interval	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.11

A list of Interval entries.  This table
contains additional objects for the interval table.

dsx1XIntervalEntry row .1.3.6.1.4.1.164.3.1.6.4.1.3.1

An entry containing additional statistical counters
applicable to a particular interval table.

Indexes

No indexes recorded

Column	Syntax	OID
dsx1IntervalLOS The counter associated with the number of LOS seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.1
dsx1IntervalLOF The counter associated with the number of OOF seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.2
dsx1IntervalLOC Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.3
dsx1IntervalAIS The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.4
dsx1IntervalRAI Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detec…	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.5
dsx1IntervalLOMF Loss of Multi-Frame sequence in E1 time slot 16.	PerfHist-TC-MIBPerfIntervalCount Enumerated Values: 1 mon 2 tue 3 wed 4 thu 5 fri 6 sat 7 sun	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.6
dsx1IntervalFEBE Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute intervals.	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-3	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.7
dsx1IntervalStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.8
dsx1IntervalBPV The counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.9
dsx1IntervalLOCRCMF Loss of CRC4 Multi-Frame sequence in E1.	PerfHist-TC-MIBPerfIntervalCount Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.10
dsx1IntervalLOFC Counts the number of loss of frame events measured in one of the previous 96, individual 15 minute, intervals.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.4.1.3.1.11

A list of Total statistics entries.  This table
contains additional objects for the Total table.

dsx1XTotalEntry row .1.3.6.1.4.1.164.3.1.6.4.1.4.1

An entry containing additional statistical counters
applicable to a particular current table.

Indexes

No indexes recorded

Column	Syntax	OID
dsx1TotalBPV The counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.	PerfHist-TC-MIBPerfTotalCount Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.164.3.1.6.4.1.4.1.9
dsx1TotalLOFC The counter associated with the number loss of frames encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.4.1.4.1.11

An extension to the DS1 Configuration table.

dsx1XConfigEntry row .1.3.6.1.4.1.164.3.1.6.4.2.1

An entry containing additional configuration
parameters.

Indexes

No indexes recorded

Column	Syntax	OID
dsx1IdleCode Byte pattern of the data received/transmitted in the E1T1 framer idle timeslots. Valid range: (0 - FF HEX).	SNMPv2-SMIInteger32r/w Enumerated Values: 1 onPowerOn 2 whenAnyStationOnLan 3 onTraffic 4 onManualConnect Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.4.2.1.1
dsx1LineMode T1 device operation mode. Valid for T1 only.	Enumerationr/w Enumerated Values: 1 noStationOnLan 2 onTraffic 3 onDelayFromConnectionOnRequest 4 onManualDisConnect	.1.3.6.1.4.1.164.3.1.6.4.2.1.2
dsx1dBTxGain Transmit line Gain for T1 CSU line mode.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.4.2.1.3
dsx1RxSensitivity Determine the maximum attenuation of the receive signal that can be compensated for by the interface receive path. Not applicable for T1.	Enumerationr/w Enumerated Values: 1 onPowerOn 2 whenAnyStationOnLan 3 onTraffic 4 onManualConnect	.1.3.6.1.4.1.164.3.1.6.4.2.1.4
dsx1RestoreTime Used to change the sync. algorithms to reduce the time required for the port to return to normal operation after a RED alarm.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.4.2.1.5
dsx1TcFirstSignal Trunk conditioning signal - value to be sent as a signal during the first 2.5 seconds after alarm detection. Range is 0x0..0xF. 0xFF is a NULL value. Valid for T1 only.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.4.2.1.6
dsx1TcSignal Trunk conditioning signal value after alarm detection. Range is 0x1..0xF for E1, and 0x0..0xF for T1.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.4.2.1.7
dsx1TcPattern Trunk conditioning data pattern to be sent upon a DS0 fail. Range is 0x0..0xFF.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.4.2.1.8
dsx1Scramble Scrambling is an operation that randomizes the bits of the payload of the ATM cell by a polynom. This operation helps with the error detection mechanism of the HEC. Not applicable for E1. active - will scramble/descram…	Enumerationr/w Constraints: range: 4-4	.1.3.6.1.4.1.164.3.1.6.4.2.1.9
dsx1LineAdaptiveTimingMode Enables end to end clock synchronization. Default value - off.	Enumerationr/w Enumerated Values: 1 main 2 alternate	.1.3.6.1.4.1.164.3.1.6.4.2.1.10
dsx1TxClockSource The source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock …	Enumerationr/w Constraints: range: 6-6	.1.3.6.1.4.1.164.3.1.6.4.2.1.11
dsx1AisEnable Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected).	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.4.2.1.12
dsx1TsEchoCancel This parameter defines for each TS whether Echo-Cancellation is on. Each bit represents one TS as follows: First octet bit'0'=not in use bit'1'= TS#1, bit'7' = TS#7, .. 2nd octet bit'0' = TS#8,.., 4th octet bit'7' = TS…	OctetStringr/w	.1.3.6.1.4.1.164.3.1.6.4.2.1.13
dsx1EchoCancelerModule This parameter indicates whether echo-cancellation module exists for this line.	Enumeration	.1.3.6.1.4.1.164.3.1.6.4.2.1.14

The HDLC configuration table.

hdlcEntry row .1.3.6.1.4.1.164.3.1.6.5.1.1

Defines the contents of each line in the RAD HDLC Table.

Indexes

No indexes recorded

Column	Syntax	OID
hdlcProtocol The HDLC protocol type V35 - HDLC encapsulated over V35 X21 - HDLC encapsulated over X21 RS530 - HDLC encapsulated over RS530	Enumerationr/w Enumerated Values: 1 other 2 local 3 remote	.1.3.6.1.4.1.164.3.1.6.5.1.1.1
hdlcRateResolution The baud rate of the internal clock.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.5.1.1.2
hdlcTxClockSource The baud rate of the internal clock.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.5.1.1.3
hdlcTerminalMode .	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.5.1.1.4
hdlcLoopbackState internal - All data coming from the network port is looped back external - All data comming from the line is looped back.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.5.1.1.5
hdlcTxClockPolarity normal - The transmitted data is sampled at the middle of bit time inverse - The transmitted data is sampled at the end of the bit time (high data rate/long cable).	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.5.1.1.6
hdlcFlowControl Enable/Disable the CTS/RTS flow control signals.	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.5.1.1.7
hdlcLineRate The rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128 and the following values: 1544, 3088, 6176. The rate values for HSSI is nMbps, where 1<=n<=52.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.5.1.1.8
hdlcRxClockMode .	Enumerationr/w	.1.3.6.1.4.1.164.3.1.6.5.1.1.9
hdlcLOF Total number of seconds the port is in Loss Of Frame state.	SNMPv2-SMIGauge32 Constraints: range: 48-48	.1.3.6.1.4.1.164.3.1.6.5.1.1.10
hdlcRxClockPolarity normal - The received data is sampled at the middle of bit time inverse - The received data is sampled at the end of the bit time (high data rate/long cable).	Enumerationr/w Constraints: range: 4-4	.1.3.6.1.4.1.164.3.1.6.5.1.1.11

All the entries of this table are identical (have the 
same value) for all the configurations (1..255) except 
the TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry.

sysCClkSrcEntry row .1.3.6.1.4.1.164.3.3.1.6.1.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
sysCClkCnfgIdx This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.164.3.3.1.6.1.1.1
sysCClkSrcIdx An index in the table. There are only two entries in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters	Enumeration	.1.3.6.1.4.1.164.3.3.1.6.1.1.2
sysCClkSrcMode This entry indicates the source the nodal timing is locked to. none - is an invalid option for Master clock. internal - is an invalid option for Fallback clock . station - is an invalid option for a stand-alone un…	Enumerationr/w	.1.3.6.1.4.1.164.3.3.1.6.1.1.3
sysCClkSrcPrt This entry is valid only when working in rxClk mode. For invalid entry the return value will be 9999. The valid port number depends on the IO slot no., the installed card type and the port type: outside…	SNMPv2-SMIInteger32r/w Enumerated Values: 1 permanent 2 dynamic 3 invalid 4 semiDynamic Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.3.1.6.1.1.4
sysCClkStationFreq This entry indicates the frequency of the station clock when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'.	Enumerationr/w	.1.3.6.1.4.1.164.3.3.1.6.1.1.5
sysCClkRevertiveTimeout The time in seconds in which the system will monitor the higher level clock source, before decision to revert to that clock. In case the time is zero, revertive mode will be disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.3.1.6.1.1.6

Mask tables enable definition of forwarding restrictions and 
control of message flow in the internetwork. Each entry
in this table defines a mask statement consisting of up to 
three mask definitions and an action defined by 
radBridgeMaskOper. Different types of mask entries are supported, 
as defined by radBridgeMaskType.

radBridgeMaskEntry row .1.3.6.1.4.1.164.4.1.3.1

An entry in table radBridgeMaskTable.

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeMaskType Defines the type of mask entry.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.3.1.1
radBridgeMaskIfIndex Specifies the if Index of the interface to which the mask is applied.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.3.1.2
radBridgeMaskNum The Mask entry number, defined by its line number in the mask table.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.3.1.3
radBridgeMaskDest Specifies the type of destination address carried by the frame to which the mask will be applied. Unassigned-condition deactivates the mask entry.	Enumerationr/w Enumerated Values: 1 tx 2 rx 3 compress 4 priority 5 loadSharing 6 facs 7 codConnect 8 codDisconnect	.1.3.6.1.4.1.164.4.1.3.1.4
radBridgeMaskPat1 Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.	OctetStringr/w	.1.3.6.1.4.1.164.4.1.3.1.5
radBridgeMaskActiveBit1 Specifies the positions of the wild card characters (*) in the radBridgeMaskPat1 field.	OctetStringr/w	.1.3.6.1.4.1.164.4.1.3.1.6
radBridgeMaskFrom1 Offset base of radBridgeMaskPat1 within the frame. Net can be in some cases the data start point.	Enumerationr/w Enumerated Values: 1 unknown 2 ip 3 ipx 4 sna 5 netbios 6 apple 7 dec 255 all	.1.3.6.1.4.1.164.4.1.3.1.7
radBridgeMaskOffset1 Specifies the radBridgeMaskPat1 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm1.The mask offset is an even decimal number in the range of 0 to 1518.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.3.1.8
radBridgeMaskCond1 Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset1 the packet contains data that matches the content of radBridgeMaskPa…	Enumerationr/w Enumerated Values: 1 unknown 2 all 3 broadcast 4 multicast	.1.3.6.1.4.1.164.4.1.3.1.9
radBridgeMaskPat2 Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.	OctetStringr/w Enumerated Values: 1 false 2 true	.1.3.6.1.4.1.164.4.1.3.1.10
radBridgeMaskActiveBit2 Specifies the positions of the wild card characters (*) in the radBridgeMaskPat2 field.	OctetStringr/w	.1.3.6.1.4.1.164.4.1.3.1.11
radBridgeMaskFrom2 Offset base of radBridgeMaskPat2 within the frame. Net can be in some cases the data start point.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.3.1.12
radBridgeMaskOffset2 Specifies the radBridgeMaskPat2 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm2.The mask offset is an even decimal number in the range of 0 to 1518.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 macAddress 2 netAddress 3 ipRange 4 appleAddress Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.3.1.13
radBridgeMaskCond2 Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset2 the packet contains data that matches the content of radBridgeMaskPa…	Enumerationr/w Enumerated Values: 1 false 2 true	.1.3.6.1.4.1.164.4.1.3.1.14
radBridgeMaskPat3 Describes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.	OctetStringr/w	.1.3.6.1.4.1.164.4.1.3.1.15
radBridgeMaskActiveBit3 Specifies the positions of the wild card characters (*) in the radBridgeMaskPat3 field.	OctetStringr/w	.1.3.6.1.4.1.164.4.1.3.1.16
radBridgeMaskFrom3 Offset base of radBridgeMaskPat3 within the frame. Net can be in some cases the data start point.	Enumerationr/w Enumerated Values: 1 macAddress 2 netAddress 3 ipRange 4 appleAddress	.1.3.6.1.4.1.164.4.1.3.1.17
radBridgeMaskOffset3 Specifies the radBridgeMaskPat3 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm3. The mask offset is an even decimal number in the range of 0 to 1518.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 false 2 true Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.3.1.18
radBridgeMaskCond3 Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset3 the packet contains data that matches the content of radBridgeMaskPa…	Enumerationr/w Enumerated Values: 1 unknown 2 ipxRip 3 ipxSap 4 ipxSpx 5 ipUdp 6 ipTcp 7 ipIcmp 8 ipxNcp 9 ipxWan 10 ipxEco 11 ipxErr 12 ipxPep	.1.3.6.1.4.1.164.4.1.3.1.19
radBridgeMaskOper The type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is removed from the list.	Enumerationr/w Enumerated Values: 1 false 2 true	.1.3.6.1.4.1.164.4.1.3.1.20

The table of COD parameters

radBridgeCODEntry row .1.3.6.1.4.1.164.4.1.4.1.1

Each radBridgeCODEntry consists of the following parameters

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeCODIfIndex The interface to which this COD entry is applicable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.4.1.1.1
radBridgeCODManualConnect The management station can start connection manually by setting this parameter	Enumerationr/w Enumerated Values: 1 false 2 true	.1.3.6.1.4.1.164.4.1.4.1.1.2
radBridgeCODMode In answer mode only one incoming call may be accepted at a time. Other nodes attempting to access the local modem will receive a busy signal until the connection is terminated. (Answer mode has no difficulty supporting …	Enumerationr/w Enumerated Values: 1 block 2 forward 3 route 4 forward-route 5 high-priority 6 noOp 7 delete 8 smartMask	.1.3.6.1.4.1.164.4.1.4.1.1.3
radBridgeCODConnectDelay The connect delay defines the minimum time period that the link must stay disconnected, between 2 succesive connections (in seconds).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.4.1.1.4
radBridgeCODisConnectDelay The disconnect delay defines the minimum time period the link must stay connected, between 2 succesive disconnections (in seconds).	SNMPv2-SMIInteger32r/w Enumerated Values: 1 false 2 true Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.4.1.1.5
radBridgeCODImplicitSwitch The inplicit switch allows the user to ignore implicit triggers provided by the COD software.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.4.1.1.6
radBridgeCODNumAccess The number of successful connections that have been established since the COD has been reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.4.1.4.1.1.7
radBridgeCODTotalConnecTime The sum of all the connect time intervals since the COD was reset.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.4.1.1.8

The table of COD parameters

radBridgeCODTimeTriggerEntry row .1.3.6.1.4.1.164.4.1.4.2.1

Each radBridgeCODTimeTriggerEntry consists of the following parameters

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeCODTimeIfIndex The interface to which this COD Time Trigger entry is applicable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.4.2.1.1
radBridgeCODDay The day of the week in which the dial up connection operates.	Enumeration	.1.3.6.1.4.1.164.4.1.4.2.1.2
radBridgeCODTimeTriggerNum Every day of the week the user can configure 3 dial up connections.	Integer32	.1.3.6.1.4.1.164.4.1.4.2.1.3
radBridgeCODTimeTriggerFrom Time to start Dial Up connection, in format hh:mm.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.4.1.4.2.1.4
radBridgeCODTimeTriggerTo Time to terminate Dial Up connection, in format HH:MM.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.4.1.4.2.1.5
radBridgeCODTimeTriggerStatus The status of a table entry.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.4.2.1.6

The table of COD Traffic trigger

radBridgeCODTrafficEntry row .1.3.6.1.4.1.164.4.1.4.3.1.1

Each radBridgeCODTrafficEntry consists of the following parameters.

Indexes

intSwdlObjIdx intSwdlFileIdx

Column	Syntax	OID
radBridgeCODProtocolType The Protocol Type of the Traffic Table	Enumerationr/w	.1.3.6.1.4.1.164.4.1.4.3.1.1.1
radBridgeCODTrafficTriggerStatus Command of Status of the Protocol Traffic Trigger	Enumerationr/w	.1.3.6.1.4.1.164.4.1.4.3.1.1.2

The table of COD Condition parameters

radBridgeCODCondEntry row .1.3.6.1.4.1.164.4.1.4.4.1

Each radBridgeCODCondEntry consists of the following parameters

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeCODCondIfIndex The interface, this COD entry is applicable to.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.4.4.1.1
radBridgeCODOriginateConnectCondition This condition, allows the user to specify the condition under which the link is connected. The options are onPowerOn - On power on. whenAnyStationOnLan - When any station on lan. onTraffic - …	Enumerationr/w	.1.3.6.1.4.1.164.4.1.4.4.1.2
radBridgeCODOriginateDisConnectCondition This condition allows the user to specify the condition under which the link is disconnected. The options are: noStationOnLan - When there is no station on lan. Counts 15 minutes from the point …	Enumerationr/w Enumerated Values: 1 notApplicable 2 off 3 on	.1.3.6.1.4.1.164.4.1.4.4.1.3
radBridgeCODOriginateDisConnectDelay Delay time in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.4.4.1.4
radBridgeCODAnswerConnectCondition CODCondAnswerConnect allows the user to specify the condition under which the link is connected. The options are: onPowerOn - On power on. whenAnyStationOnLan - When any station on lan. onTraffic …	Enumerationr/w	.1.3.6.1.4.1.164.4.1.4.4.1.5
radBridgeCODSpecificOnTrafficOIDCondition A reference to a specific entry in the radBridgeMaskTable, which describes the particular COD condition . If Connect or Disconnect Conditions are not onTraffic, its value should be set to the OBJECT IDENTIFIER { 0 0 …	ObjectIdentifier	.1.3.6.1.4.1.164.4.1.4.4.1.6
radBridgeCODDisConnectMinimunFramesNumber Frames rate.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.4.4.1.7

The routing table used by RIP to calculate routes to remote
desination networks.

radBridgeIPXRipTableEntry row .1.3.6.1.4.1.164.4.1.5.2.6.1

The routing information for one of this entity's destination networks.

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeIPXRipDestNetwork The destination network address to which this entry's routing information pertains.	OctetString	.1.3.6.1.4.1.164.4.1.5.2.6.1.1
radBridgeIPXRipPolicy A value specifying the precidence of the route. A value of zero means that the route is the best route, a value of one means that the route is the second best route and so on.	Enumeration	.1.3.6.1.4.1.164.4.1.5.2.6.1.2
radBridgeIPXRipForwardingRouter The IPX node address of the next hop (router) for the entry's associated destination network.	OctetStringr/w	.1.3.6.1.4.1.164.4.1.5.2.6.1.3
radBridgeIPXRipNIC An interface identifier specifying what IPX interface the next hop can be found on.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.2.6.1.4
radBridgeIPXRipTickMetric The metric, in terms of transit time, associated with the route given by the entry. This time is in terms of 1/18ths of a second.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.2.6.1.5
radBridgeIPXRipHopMetric The metric, in terms of distance , associated with the route given by the entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.2.6.1.6
radBridgeIPXRipAgingTime The last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.4.1.5.2.6.1.7
radBridgeIPXRipValueStatus The entry status value; whether the entry is permanent (added statically), reachable or unreachable. In the latter two cases it would be added by RIP. A semiDynamic entry is an entry enterd manualy by the user and can …	Enumerationr/w Enumerated Values: 1 other 2 v35 3 rs530 4 x21 5 bnc 6 utp 7 aui 8 rs422 9 crossUtp 10 rj45 11 v24 12 g703 13 termBlock3AndRj45 14 terminalBlock3 15 terminalBlock5 16 terminalBlock7 17 db25 18 db15 19 rj45ethernet 20 termBlock5AndRj45 21 db9 22 g703E1 23 g703E1-LTU 24 sc 25 st 26 stl 27 fc 28 tb5w 29 termBlock6AndRj45 30 ethBnc 31 scsi26 32 eth4381 33 twoBnc 34 scsi50 35 twoMiniBnc 36 sf1 37 terminalBlock4 38 sf2 39 db25Balanced 40 v36 41 block4W 42 iripRj45 43 irEthQRj45 44 iripBnc 45 rs530WA 46 v35WA 47 irEthQBnc 48 v35Db25 49 rj11 50 mtrj 51 lc 52 terminalBlock2 53 irEth10s100 54 scsi68 255 none	.1.3.6.1.4.1.164.4.1.5.2.6.1.8
radBridgeIPXRipForwardType The type of route. Note that local(2) refers to a route for which the next hop is the final destination; remote(3) refers to a route for which the next hop is not the final destination.	Enumerationr/w Enumerated Values: 1 notApplicable 2 nm850 3 nm1300 4 nm1300Laser 5 nm1550Laser	.1.3.6.1.4.1.164.4.1.5.2.6.1.9

The RIP interface table.

radBridgeIPXRipInfEntry row .1.3.6.1.4.1.164.4.1.5.2.7.1

Each entry corresponds to one ifindex.

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeIPXRipInfIfIndex This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.2.7.1.1
radBridgeIPXRipInfBcastUpdate The RIP periodic update interval, in seconds. Zero value corresponds to infinite interval.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.2.7.1.2
radBridgeIPXRipInfAgeMultiplier The holding multiplier for information received in RIP periodic updates. Zero value corresponds to infinite aging time.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 auto 2 s300bps 3 s1200bps 4 s2400bps 5 s4800bps 6 s9600bps 7 s19200bps 8 s38400bps 9 s57600bps 10 s115200bps Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.2.7.1.3

The Server Information table is used by SAP to store information
of services which are available on the internetwork.

radBridgeIPXSapTableEntry row .1.3.6.1.4.1.164.4.1.5.3.6.1

The server information for one of this entity's server entries.

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeIPXSapServerType The type of the server for which this entry pertains.	SNMPv2-SMIInteger32 Enumerated Values: 1 notApplicable 2 stopBits1 3 stopBits1dot5 4 stopBits2 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.3.6.1.1
radBridgeIPXSapName The name of the server for which this entry pertains.	OctetString Enumerated Values: 1 unknown 2 noUse 3 terminal 4 nmsSlip 5 nmsPpp 6 muxSlip 7 muxPpp 8 dialOut	.1.3.6.1.4.1.164.4.1.5.3.6.1.2
radBridgeIPXSapNetwork The IPX network address of the host on which this server exists.	OctetStringr/w Enumerated Values: 1 notApplicable 2 dce 3 dte	.1.3.6.1.4.1.164.4.1.5.3.6.1.3
radBridgeIPXSapNode The IPX node address of the host on which this server exists.	OctetStringr/w Enumerated Values: 1 notApplicable 2 on 3 rts 4 dteWait 5 dteIgnore	.1.3.6.1.4.1.164.4.1.5.3.6.1.4
radBridgeIPXSapSocket The IPX socket number that is being used by the server to which this entry pertains.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 notApplicable 2 d0 3 d10 4 d50 5 d100 6 d200 7 d300 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.3.6.1.5
radBridgeIPXSapHopsToServer The number of hops to the entity on which this server exists.	Integer32r/w Enumerated Values: 1 notApplicable 2 on 3 dtr	.1.3.6.1.4.1.164.4.1.5.3.6.1.6
radBridgeIPXSapNIC An Network Interface Card identifier specifying what IPX interface the next hop can be found on.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 notApplicable 2 none 3 proprietary 4 rip2 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.3.6.1.7
radBridgeIPXSapAgingTime The last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.4.1.5.3.6.1.8
radBridgeIPXSapStatus The status of the entry.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.5.3.6.1.9

The Sap interface table.

radBridgeIPXSapInfEntry row .1.3.6.1.4.1.164.4.1.5.3.7.1

Each entry corresponds to one ifindex.

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeIPXSapInfIfIndex This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.3.7.1.1
radBridgeIPXSapInfBcastUpdate The SAP periodic update interval, in seconds. Zero value corresponds to infinite interval.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.3.7.1.2
radBridgeIPXSapInfAgeMultiplier The holding multiplier for information received in SAP periodic updates. Zero value corresponds to infinite aging time.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.5.3.7.1.3

This is the new masking scheme. 
Mask tables enable definition of forwarding restrictions and 
control of message flow in the internetwork. Each entry
in this table defines a mask statement and an action defined by 
maskingOperation.

maskingEntry row .1.3.6.1.4.1.164.4.1.6.3.1

Defines the contents of each line in the mask table.

Indexes

No indexes recorded

Column	Syntax	OID
maskingType Defines the type of mask entry.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.1
maskingIfIndex Specifies the ifIndex of the interface to which the mask is applied.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.6.3.1.2
maskingIndex An index to the masking table. This number should not be greater than maskingMaxEntries	SNMPv2-SMIInteger32r/w Enumerated Values: 2 off 3 on Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.6.3.1.3
maskingProtocolType The base protocol for masking. IPX, IP, others.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.4
maskingSmartMaskOID A reference to a specific Smart mask table (old radBridgeMaskTable) which enables a more specific mask type. If this information is not available, its value should be set to the OBJECT IDENTIFIER { 0 0 }.	ObjectIdentifier	.1.3.6.1.4.1.164.4.1.6.3.1.5
maskingFrameType Enables the user to decide about frame type * all frame * just broadcast * just multicast.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.6
maskingFrameTypeCondition Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingFrameType the packet contains data that matches the content of maskingFrameType.…	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.7
maskingSourceAddress The source address is according to the maskingMacOrNet and maskingProtocolType variables. In case of 'MAC' enter 6 bytes (48 bit) of source address. In case of 'NET' if the maskingProtocolType is IP, this is t…	GenAddressr/w Type Constraints: range: 12	.1.3.6.1.4.1.164.4.1.6.3.1.8
maskingSourceActiveBits Specifies the positions of the wild card characters (*) in the maskingSourceAddress field. Only the 1's bit will be taken in considerations.	GenAddressr/w Enumerated Values: 1 unknown 2 user 3 remoteUnit 4 dteRouter Type Constraints: range: 12	.1.3.6.1.4.1.164.4.1.6.3.1.9
maskingSourceMacOrNet The variable maskingSourceAddress and maskingSourceActiveBits will be treated as MAC, or NET address. - If maskingProtocolType = 'all', 'sna', 'netbios', dec or 'unknown', the maskingSourceMacOrNet can be macAddress…	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.10
maskingSourceCondition Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingSourceAddress (in conjunction with maskingSourceActiveBits) the …	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.11
maskingDestAddress If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. The destination address is according to the maskingMacOrNet and maskingProto…	GenAddressr/w Type Constraints: range: 12	.1.3.6.1.4.1.164.4.1.6.3.1.12
maskingDestActiveBits If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the positions of the wild card characters (*) in the maskingDe…	GenAddressr/w Type Constraints: range: 12	.1.3.6.1.4.1.164.4.1.6.3.1.13
maskingDestMacOrNet If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. - If maskingProtocolType = 'all', 'sna', 'netbios', dec or 'unknown', the…	Enumerationr/w Enumerated Values: 1 loopTiming 2 localTiming 3 throughTiming 4 adaptive 255 notApplicable	.1.3.6.1.4.1.164.4.1.6.3.1.14
maskingDestCondition If maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the logical condition of the mask pattern: true - …	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable	.1.3.6.1.4.1.164.4.1.6.3.1.15
maskingLowLevelProt This field is set in conjunction with the maskingProtocolType variable. This variable specifies the low level protocol. The IPX socket entered in maskingDestAddress has priority over the value of maskingLowLevelProt, w…	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.4.1.6.3.1.16
maskingLowLevelProtCondition Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingLowLevelProt the packet contains data that matches the content of maskingLowLeve…	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.17
maskingHighLevelProt This field is set in connection to the maskingProtocolType variable. This variable specifies the high level protocols (application). As for today it supports just IP protocol stack. The object's value is a sum of the fo…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.6.3.1.18
maskingHighLevelProtCondition Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingHighLevelProt the packet contains data that matches the content of maskingHi…	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.19
maskingPortNum The port number is the same as in high level protocol. It specifies the dest. port in IP case or the dest. socket in case of IPX & apple protocols. IP - This object is applicable only if none (0) value was selecte…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.6.3.1.20
maskingPortNumCondition Specifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingPortNum the packet contains data that matches the content of maskingPortNum.…	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.21
maskingOperation The type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is removed from the list. smartMask = the operation and desti…	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.22
maskingSrcPortNum The source port number. For IP: No Condition. For IPX: This object is applicable only if the socket entered in maskingSourceAddress is don't care (00) and maskingLowLevelProt is NOT ipxRip or ipxS…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.4.1.6.3.1.23
maskingSrcPortNumCondition The same as 'maskingPortNumCondition'. Relates to source port.	Enumerationr/w	.1.3.6.1.4.1.164.4.1.6.3.1.24