AC-SYSTEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
33
Rows
33
Columns
350

acNetworkIPTable

table obsolete
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21 · 1 row entry · 6 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acNetworkIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acNetworkIPTable'
IP control table. Enables to add, remove or configure the device's networks.
acNetworkIPEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1
Column Syntax OID
The row's index.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1oam
2media
3control
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.1
The row's index in the IF MIB.
The IF MIB is not yet supported and so for now this is the
same as the ipCidrRouteIfIndex object.
0 = OAM
1 = Media
2 = Control.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-2
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.2
Sets the IP address of the OAM (Operation, Administration &
Management) when operating in multiple IPs mode.

Range: Legal IP address
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.3
Sets the Subnet Mask for the OAM interface, when operating in
multiple IPs mode.

Range: Legal Subnet
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.4
Sets the Default gateway for the OAM interface when operating
in multiple IPs mode.

Range: Legal IP address in subnet
Default = 0.0.0.0.
Access: Online.
AC INI-Param: N/A
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.5
Determines if a row is currentely active or not.
Lock(1) - the row is in configuration (non active) state.
UnLock(2) - row is in active state.
Access: Online.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
1lock
2unLock
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.6
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22 · 1 row entry · 14 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysInterfaceTable'
Multiple Interfaces' Interface Table
acSysInterfaceEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1
Column Syntax OID
Index Field for line.
AC INI-Param: InterfaceTable_Index
Unsigned32
Constraints:
range: 0-31
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.1
ROWSTATUS Field for line.
AC INI-Param: InterfaceTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.2
Mangement Field for ACTIONS.
AC INI-Param: InterfaceTable_Action
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.3
Mangement Field for ACTIONS RESULT.
AC INI-Param: InterfaceTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.4
The type assigned to the interface.
Access: Offline.
AC INI-Param: InterfaceTable_ApplicationTypes
Enumerationr/w
Enumerated Values:
0oam
1media
2control
3oamAndMedia
4oamAndControl
5mediaAndControl
6oamAndMediaAndControl
99maintenance
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.5
Interface configuration mode.
Access: Offline.
AC INI-Param: InterfaceTable_InterfaceMode
Enumerationr/w
Enumerated Values:
3iPv6PrefixManual
4iPv6Manual
10iPv4Manual
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.6
IP Address (can be either IPv4 or IPv6) for this interface.
Access: Online.
AC INI-Param: InterfaceTable_IPAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.7
The number of ?1? bits in this interface?s netmask.
Access: Offline.
AC INI-Param: InterfaceTable_PrefixLength
Unsigned32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.8
Default Gateway. Filled in one row only. 0 in others.
Access: Offline.
AC INI-Param: InterfaceTable_Gateway
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.9
VLAN ID of this interface.
Access: Offline.
AC INI-Param: InterfaceTable_VlanID
Unsigned32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.10
a 16 character string of this interface?s name.
Access: Offline.
AC INI-Param: InterfaceTable_InterfaceName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11
Primary DNS server IP address.
Access: Online.
AC INI-Param: InterfaceTable_PrimaryDNSServerIPAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.12
Secondary DNS server IP address.
Access: Online.
AC INI-Param: InterfaceTable_SecondaryDNSServerIPAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.13
Multiple Interfaces' Interface Table.
Access: Offline.
AC INI-Param: InterfaceTable_UnderlyingInterface
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.14
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23 · 1 row entry · 11 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysPhysicalPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysPhysicalPortsTable'
Physical Ports Table
acSysPhysicalPortsEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1
Column Syntax OID
Index Field for line.
AC INI-Param: PhysicalPortsTable_Index
Unsigned32
Constraints:
range: 0-5
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.1
ROWSTATUS Field for line.
AC INI-Param: PhysicalPortsTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.2
Mangement Field for ACTIONS.
AC INI-Param: PhysicalPortsTable_Action
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.3
Mangement Field for ACTIONS RESULT.
AC INI-Param: PhysicalPortsTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.4
Physical Ports Table.
AC INI-Param: PhysicalPortsTable_Port
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-17
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5
Port Enable/Disable.
AC INI-Param: PhysicalPortsTable_Mode
Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.6
Port's Native VID or PVID.
Access: Offline.
AC INI-Param: PhysicalPortsTable_NativeVlan
Unsigned32r/w
Constraints:
range: 0-4096
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.7
Port's Speed and Duplex Mode.
Access: Offline.
AC INI-Param: PhysicalPortsTable_SpeedDuplex
Enumerationr/w
Enumerated Values:
0s10BaseTHalfDuplex
1s10BaseTFullDuplex
2s100BaseTHalfDuplex
3s100BaseTFullDuplex
4autoNegotiation
6s1000BaseTHalfDuplex
7s1000BaseTFullDuplex
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.8
Port's User Description.
Access: Offline.
AC INI-Param: PhysicalPortsTable_PortDescription
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-17
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.9
Physical Ports Table.
AC INI-Param: PhysicalPortsTable_GroupMember
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-17
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.10
Active or Redundant Status.
AC INI-Param: PhysicalPortsTable_GroupStatus
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-17
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.11
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24 · 1 row entry · 8 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysEtherGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysEtherGroupTable'
Ether Group Table
acSysEtherGroupEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1
Column Syntax OID
Index Field for line.
AC INI-Param: EtherGroupTable_Index
Unsigned32
Constraints:
range: 0-5
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.1
ROWSTATUS Field for line
Static table - only notInService/active supported.
AC INI-Param: EtherGroupTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.2
Mangement Field for ACTIONS.
AC INI-Param: EtherGroupTable_Action
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.3
Mangement Field for ACTIONS RESULT.
AC INI-Param: EtherGroupTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.4
Ethernet Group's Name.
AC INI-Param: EtherGroupTable_Group
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-15
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.5
Group Mode of Operation.
Access: Offline.
AC INI-Param: EtherGroupTable_Mode
Enumerationr/w
Enumerated Values:
2oneRXoneTX
3twoRXoneTX
4twoRXtwoTX
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.6
First Member of the Group.
Select the OID corresponding to the one appearing in the Physical
Ports table.
The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5.
acSysPhysicalPortsPort.
Access: Offline.
AC INI-Para…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.7
Second Member of the Group.
Select the OID corresponding to the one appearing in the Physical
Ports table.
The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5.
acSysPhysicalPortsPort.
Access: Offline.
AC INI-Para…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.5003.9.10.10.1.3.1.30.24.1.8
.1.3.6.1.4.1.5003.9.10.10.1.3.4.21 · 1 row entry · 2 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysWEBACLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysWEBACLTable'
Access control list for the WEB.
acSysWEBACLEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1
Column Syntax OID
WEB ACL (Access Control List) index.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-9
.1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.1
Allows IP addresses to connect to the Web interface. Set to
zeroes to allow all IP addresses.
Range: Valid IP address
.
Access: Instant.
AC INI-Param: WEBACCESSLIST
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.2
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1 · 1 row entry · 7 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysWEBAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysWEBAccessTable'
acSysWEBAccessEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1
Column Syntax OID
WEB Basic row-status.
AC INI-Param: WEBAccessRowStatus
Unsigned32r/w
Constraints:
range: 1-1
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.1
WEB Access action.
AC INI-Param: WEBAccessAction
Unsigned32r/w
Constraints:
range: 0-0
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.2
WEB Access action result.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-0
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.3
WEB Access index.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0administrator
1monitoringLevel
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.4
WEB Basic user name. Range = String[26].
Access: Instant.
AC INI-Param: WEBAccessUserName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-60
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.5
WEB Basic userAccess.
Access: Instant.
AC INI-Param: WEBAccessUserCode
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-60
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.6
Selects HTTP basic (clear text) or digest (MD5) authentication
for the web interface.
When set to 0, basic authentication (clear text) will be used.
When set to 1, digest authentication (MD5) will be used.
When set to 2…
Enumerationr/w
Enumerated Values:
0basicMode
1digestModeWhenPossible
2digestModeHTTPOnly
.1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.7
.1.3.6.1.4.1.5003.9.10.10.1.3.10.21 · 1 row entry · 6 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysVlanMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysVlanMapTable'
acSysVlanMapEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1
Column Syntax OID
Index Field for line. Internal parameter.
AC INI-Param: DiffServToVlanPriority_Index
Unsigned32
Constraints:
range: 0-63
.1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.1
ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.2
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.3
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.4
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p).
Access: Online.
AC INI-Param: DiffServToVlanPriority_DiffServ
Unsigned32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.5
Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p).
Access: Online.
AC INI-Param: DiffServToVlanPriority_VlanPriority
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.6
.1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1 · 1 row entry · 7 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysPOETable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysPOETable'
acSysPOEEntry row .1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1
Indexes
Column Syntax OID
This parameter is used for the Power Over Ethenet (PoE) Index
Field for line. Internal parameter.
AC INI-Param: POETable_Index
Unsigned32
Constraints:
range: 0-11
.1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.1
Power Over Ethenet (PoE) ROWSTATUS field for line. Internal
parameter.
Access: Offline.
AC INI-Param: POETable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.2
Power Over Ethenet (PoE) Mangement Field for ACTIONS. Internal
parameter.
Access: Offline.
AC INI-Param: POETable_Action
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.3
Power Over Ethenet (PoE) Mangement Field for ACTIONS RESULT.
Internal parameter.
AC INI-Param: POETable_ActionRes
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.4
This parameter is used for Power Over Ethenet (PoE) - enable/diasble
port PoE.
Access: Offline.
AC INI-Param: POETable_PortEnable
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.5
This parameter is used for Power Over Ethenet (PoE) - Port Power[mW].
Access: Offline.
AC INI-Param: POETable_PortPower
Unsigned32r/w
Constraints:
range: 4000-30000
.1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.6
This parameter is used to show if working in mode IEEE 802.3AF
(0) or IEEE 802.3AT (1).
Access: Offline.
AC INI-Param: POETable_PortATEnable
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.5003.9.10.10.1.3.12.21.1.1.7

acSysIKEPolicyTable

table obsolete
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1 · 1 row entry · 20 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysIKEPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysIKEPolicyTable'
acSysIKEPolicyEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1
Column Syntax OID
This parameter is used for the Internet Key Encryption (IKE)
Index Field for line. Internal parameter.
AC INI-Param: IKE_DB_INDEX
Unsigned32
Constraints:
range: 0-19
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.1
This parameter is used for the Internet Key Encryption (IKE)
ROWSTATUS Field for line. Internal parameter.
AC INI-Param: IKE_DB_ROWSTATUS
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.2
This parameter is used for the Internet Key Encryption (IKE)
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: IKE_DB_ACTION
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.3
This parameter is used for the Internet Key Encryption (IKE)
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: IKE_DB_ACTION_RESULT
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.4
IKE Policy - Shared Key.
Access: Instant.
AC INI-Param: IKEPOLICYSHAREDKEY
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.5
IKE Policy - IKE SA LifeTime in seconds.
Access: Instant.
AC INI-Param: IKEPOLICYLIFEINSEC
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.6
IKE Policy - IKE SA LifeTime in KB.
Access: Instant.
AC INI-Param: IKEPOLICYLIFEINKB
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.7
IKE Policy - Proposal 0 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0
Enumerationr/w
Enumerated Values:
1dES-CBC
2triple-DES-CBC
3aES
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.8
IKE Policy - Proposal 1 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1
Enumerationr/w
Enumerated Values:
1dES-CBC
2triple-DES-CBC
3aES
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.9
IKE Policy - Proposal 2 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2
Enumerationr/w
Enumerated Values:
1dES-CBC
2triple-DES-CBC
3aES
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.10
IKE Policy - Proposal 3 encryption type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3
Enumerationr/w
Enumerated Values:
1dES-CBC
2triple-DES-CBC
3aES
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.11
IKE Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.12
IKE Policy - Proposal 1 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.13
IKE Policy - Proposal 2 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.14
IKE Policy - Proposal 3 authentication type.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.15
IKE Policy - Proposal 0 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0
Enumerationr/w
Enumerated Values:
0dH-786-BIT
1dH-1024-BIT
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.16
IKE Policy - Proposal 1 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1
Enumerationr/w
Enumerated Values:
0dH-786-BIT
1dH-1024-BIT
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.17
IKE Policy - Proposal 2 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2
Enumerationr/w
Enumerated Values:
0dH-786-BIT
1dH-1024-BIT
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.18
IKE Policy - Proposal 3 Diffie Hellman Group.
Access: Instant.
AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3
Enumerationr/w
Enumerated Values:
0dH-786-BIT
1dH-1024-BIT
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.19
This parameter is used for Internet Key Encryption (IKE) Policy
- IKE Authentication Method (Preshared key/ RSA).
Access: Offline.
AC INI-Param: IKEPOLICYAUTHENTICATIONMETHOD
Enumerationr/w
Enumerated Values:
0presharedKey
1rsaSignature
.1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.20

acSysIPSecSPDTable

table obsolete
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21 · 1 row entry · 24 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysIPSecSPDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysIPSecSPDTable'
acSysIPSecSPDEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1
Column Syntax OID
Security Policy Database (SPD) Index Field for line. Internal
parameter.
AC INI-Param: SPD_INDEX
Unsigned32
Constraints:
range: 0-19
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.1
Security Policy Database (SPD) ROWSTATUS field for line. Internal
parameter.
AC INI-Param: SPD_ROWSTATUS
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.2
Security Policy Database (SPD) Mangement Field for ACTIONS.
Internal parameter.
AC INI-Param: SPD_ACTION
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.3
Security Policy Database (SPD) Mangement Field for ACTIONS RESULT.
Internal parameter.
AC INI-Param: SPD_ACTION_RESULT
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.4
This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Remote IP address as IP or Host Name.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTEIPADDRESS
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-99
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.5
This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Source Port.
Access: Instant.
AC INI-Param: IPSECPOLICYSRCPORT
Unsigned32r/w
Constraints:
range: 0-65536
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.6
This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Destination Port.
Access: Instant.
AC INI-Param: IPSECPOLICYDSTPORT
Unsigned32r/w
Constraints:
range: 0-65536
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.7
This parameter is used for Secure Internet Protocol (IPsec)
Policy Policy - Protocol.
Access: Instant.
AC INI-Param: IPSECPOLICYPROTOCOL
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.8
This parameter is used for the Secure Internet Protocol (IPsec)
Policy - Index into the Key Exchange Method Table (IKE Table).
Access: Offline.
AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEX
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.9
IPsec Policy - IPSec SA LifeTime in seconds.
Access: Instant.
AC INI-Param: IPSECPOLICYLIFEINSEC
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.10
IPsec Policy - IPSec SA LifeTime in KB.
Access: Instant.
AC INI-Param: IPSECPOLICYLIFEINKB
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.11
IPsec Policy - Proposal 0 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0
Enumerationr/w
Enumerated Values:
0none
1dES-CBC
2triple-DES-CBC
3aES
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.12
IPsec Policy - Proposal 1 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1
Enumerationr/w
Enumerated Values:
0none
1dES-CBC
2triple-DES-CBC
3aES
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.13
IPsec Policy - Proposal 2 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2
Enumerationr/w
Enumerated Values:
0none
1dES-CBC
2triple-DES-CBC
3aES
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.14
IPsec Policy - Proposal 3 encryption type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3
Enumerationr/w
Enumerated Values:
0none
1dES-CBC
2triple-DES-CBC
3aES
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.15
IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.16
IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.17
IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.18
IPsec Policy - Proposal 0 authentication type.
Access: Instant.
AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3
Enumerationr/w
Enumerated Values:
2hMAC-SHA-1-96
4hMAC-MD5-96
10not-set
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.19
This parameter is used for Secure Internet Protocol (IPsec)
Policy - Local IP address type (OAM/Control).
Access: Offline.
AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPE
Enumerationr/w
Enumerated Values:
0oam
2control
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.20
This parameter is used for Secure Internet Protocol (IPsec)
Policy - Mode of Operation (Transport/Tunneling). '0' - Transport
'1' - Tunneling.
Access: Instant.
AC INI-Param: IPSECMODE
Enumerationr/w
Enumerated Values:
0transport
1tunneling
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.21
This parameter is used for Secure Internet Protocol (IPsec)
Policy - IP Address of the Remote IPSec Tunnel Endpoint.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESS
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.22
This parameter is used for Secure Internet Protocol (IPsec)
Policy - IP Address of the Remote IPSec Tunnel Endpoint.
Access: Instant.
AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESS
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.23
This parameter is used for Secure Internet Protocol (IPsec)
Policy - Subnet Mask of the Remote IPSec Address.
Access: Instant.
AC INI-Param: IPSECPOLICYREMOTESUBNETMASK
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.24
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22 · 1 row entry · 7 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysIPsecProposalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysIPsecProposalTable'
IPsec Proposal table
acSysIPsecProposalEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1
Column Syntax OID
Index Field for line.
AC INI-Param: IPsecProposalTable_Index
Unsigned32
Constraints:
range: 0-4
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.1
ROWSTATUS Field for line.
AC INI-Param: IPsecProposalTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.2
Mangement Field for ACTIONS.
AC INI-Param: IPsecProposalTable_Action
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.3
Mangement Field for ACTIONS RESULT.
AC INI-Param: IPsecProposalTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.4
Selects the encryption (privacy) algorithm to use.
Access: Online.
AC INI-Param: IPsecProposalTable_EncryptionAlgorithm
Enumerationr/w
Enumerated Values:
0none
1desCbc
2tripleDesCbc
3aes
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.5
Selects the message authentication (integrity) algorithm to
use.
Access: Online.
AC INI-Param: IPsecProposalTable_AuthenticationAlgorithm
Enumerationr/w
Enumerated Values:
0none
2hmacSha1-96
4hmacMd5-96
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.6
Selects the Diffie-Hellman group to use.
Access: Online.
AC INI-Param: IPsecProposalTable_DHGroup
Enumerationr/w
Enumerated Values:
0group1-768Bits
1group2-1024Bits
.1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.7
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23 · 1 row entry · 19 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysIPsecSATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysIPsecSATable'
IPsec SA table
acSysIPsecSAEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1
Column Syntax OID
Index Field for line.
AC INI-Param: IPsecSATable_Index
Unsigned32
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.1
ROWSTATUS Field for line.
AC INI-Param: IPsecSATable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.2
Mangement Field for ACTIONS.
AC INI-Param: IPsecSATable_Action
Unsigned32r/w
Constraints:
range: 0-0
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.3
Mangement Field for ACTIONS RESULT.
AC INI-Param: IPsecSATable_ActionRes
Unsigned32
Constraints:
range: 0-0
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.4
IP address or DNS host name of the peer.
Access: Online.
AC INI-Param: IPsecSATable_RemoteEndpointAddressOrName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-98
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.5
Selects the method used for peer authentication during IKE main
mode.
Access: Online.
AC INI-Param: IPsecSATable_AuthenticationMethod
Enumerationr/w
Enumerated Values:
0presharedKey
1rSASignature
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.6
Defines the pre-shared key (in textual format).
Access: Online.
AC INI-Param: IPsecSATable_SharedKey
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-79
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.7
Defines the source port to which this configuration applies.
Access: Online.
AC INI-Param: IPsecSATable_SourcePort
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.8
Defines the destination port to which this configuration applies.
Access: Online.
AC INI-Param: IPsecSATable_DestPort
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.9
Defines the protocol type to which this configuration applies.
Standard IP protocol numbers should be used, e.g.:
0 = Any protocol (default)
17 = UDP
6 = TCP
.
Access: Online.
AC INI-Param: IPsecSATable_Protocol
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.10
Determines the duration (in seconds) for which the negotiated
IKE SA (main mode) is valid. After the time expires, the SA
is re-negotiated.
Access: Online.
AC INI-Param: IPsecSATable_Phase1SaLifetimeInSec
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.11
Determines the duration (in seconds) for which the negotiated
IPSec SA (quick mode) is valid. After the time expires, the
SA is re-negotiated.
Access: Online.
AC INI-Param: IPsecSATable_Phase2SaLifetimeInSec
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.12
Determines the maximum volume of traffic (in kilobytes) for
which the negotiated IPSec SA (quick mode) is valid.
Access: Online.
AC INI-Param: IPsecSATable_Phase2SaLifetimeInKB
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.13
Controls dead peer detection (DPD) as per RFC 3706.
Access: Online.
AC INI-Param: IPsecSATable_DPDmode
Enumerationr/w
Enumerated Values:
0dPDDisabled
1dPDPeriodic
2dPDOnDemand
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.14
Selects the IPSec mode of operation.
0 = Transport mode (default)
1 = Tunnel mode
.
Access: Online.
AC INI-Param: IPsecSATable_IPsecMode
Enumerationr/w
Enumerated Values:
0transport
1tunnel
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.15
IP address of the peer router.
Access: Online.
AC INI-Param: IPsecSATable_RemoteTunnelAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.16
IP address of the remote subnetwork.
Access: Online.
AC INI-Param: IPsecSATable_RemoteSubnetIPAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.17
Prefix length of the Remote Subnet IP Address parameter (in
bits).
Access: Online.
AC INI-Param: IPsecSATable_RemoteSubnetPrefixLength
Unsigned32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.18
Select the OID of the interface name corresponding to the one
appearing in the interface table.
The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11.
acSysInterfaceIndex
Note: when ignore a default value will be …
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.19
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1 · 1 row entry · 18 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysAccessListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysAccessListTable'
acSysAccessListEntry row .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1
Column Syntax OID
Index Field for line. Internal parameter.
AC INI-Param: ACCESSLIST_Index
Unsigned32
Constraints:
range: 0-49
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.1
ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.2
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.3
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.4
Source IP for access rule.
Access: Online.
AC INI-Param: ACCESSLIST_Source_IP
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-60
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.5
Mask for this access rule (bitwise ANDed with the source IP
of the packet).
Access: Online.
AC INI-Param: ACCESSLIST_Net_Mask
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.6
Port range - start.
Access: Online.
AC INI-Param: ACCESSLIST_Start_Port
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.7
Port range - end.
Access: Online.
AC INI-Param: ACCESSLIST_End_Port
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.8
IP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP,
ANY or numeric value).
Access: Online.
AC INI-Param: ACCESSLIST_Protocol
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-10
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.9
Maximum packet size (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Packet_Size
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.10
Allowed traffic in bytes per second (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Byte_Rate
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.11
Allowed traffic burst in bytes (0 = unused).
Access: Online.
AC INI-Param: ACCESSLIST_Byte_Burst
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.12
Allow or block traffic matching this rule.
Access: Online.
AC INI-Param: ACCESSLIST_Allow_Type
Enumerationr/w
Enumerated Values:
0notSet
1allow
2block
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.13
Statistics: number of matched packets.
AC INI-Param: ACCESSLIST_MatchCount
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.14
Name of the specific interface the rule applies to. None - default
value when no interface was chosen.
Access: Online.
AC INI-Param: ACCESSLIST_Interface_ID
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.15
Rule for specific interface or for the entire interfaces.
Access: Online.
AC INI-Param: ACCESSLIST_Use_Specific_Interface
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.16
Source Port.
Access: Online.
AC INI-Param: ACCESSLIST_Source_Port
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.17
Prefix length of source IP address (defining a subnet).
Access: Online.
AC INI-Param: ACCESSLIST_PrefixLen
Unsigned32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.18
.1.3.6.1.4.1.5003.9.10.10.1.11.21 · 1 row entry · 11 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysNFSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysNFSTable'
acSysNFSEntry row .1.3.6.1.4.1.5003.9.10.10.1.11.21.1
Indexes
Column Syntax OID
Index Field for line. Internal parameter. Index can be up to
15 in dependency of board type.
AC INI-Param: NFSServers_Index
Unsigned32
Constraints:
range: 0-15
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.1
ROWSTATUS field for line. Internal parameter.
AC INI-Param: N/A
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.2
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.3
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.4
The domain name or IP address of the NFS server. If a domain
name is provided, then a DNS server must be configured.
Access: Online.
AC INI-Param: NFSServers_HostOrIP
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-39
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.5
Path to the root of the exported file system.
Access: Online.
AC INI-Param: NFSServers_RootPath
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-99
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.6
NFS version to use with this remote file system, 2 or 3 (default).
Access: Online.
AC INI-Param: NFSServers_NfsVersion
Enumerationr/w
Enumerated Values:
2v2
3v3
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.7
Identifies the authentication method used with this remote file
system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default).
Access: Online.
AC INI-Param: NFSServers_AuthType
Enumerationr/w
Enumerated Values:
0null
1unix
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.8
User ID used in authentication if using AUTH_UNIX. The default
is 0.
Access: Online.
AC INI-Param: NFSServers_UID
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.9
Group ID used in authentication if using AUTH_UNIX. The default
is 1.
Access: Online.
AC INI-Param: NFSServers_GID
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.10
The VLAN, OAM(0) or Media(1), to use when accessing this remote
file system. The default is to use
the media VLAN. This parameters applies only if multiple IP
addresses are configured on this board.
Access: Online.
AC I…
Enumerationr/w
Enumerated Values:
0oam
1media
.1.3.6.1.4.1.5003.9.10.10.1.11.21.1.11
.1.3.6.1.4.1.5003.9.10.10.1.16.21 · 1 row entry · 17 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysNqmSenderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysNqmSenderTable'
acSysNqmSenderEntry row .1.3.6.1.4.1.5003.9.10.10.1.16.21.1
Column Syntax OID
Index Field for line. Internal parameter.
AC INI-Param: NqmSenderTable_Index
Unsigned32
Constraints:
range: 0-9
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.1
ROWSTATUS field for line. Internal parameter.
AC INI-Param: NqmSenderTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.2
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: NqmSenderTable_Action
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.3
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: NqmSenderTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.4
Sender descriptive name.
Access: Online.
AC INI-Param: NqmSenderTable_SenderName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.5
Sender enable.
Access: Online.
AC INI-Param: NqmSenderTable_Active
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.6
Target IP address.
Access: Online.
AC INI-Param: NqmSenderTable_TargetIpAddress
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.7
Target transport layer port number.
Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970,
3980, 3990.
Access: Online.
AC INI-Param: NqmSenderTable_TargetPort
Unsigned32r/w
Constraints:
range: 3900-3990
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.8
Interval between each packet transmitting [msec].
Access: Online.
AC INI-Param: NqmSenderTable_PacketInterval
Unsigned32r/w
Constraints:
range: 5-1000
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.9
Size of IP payload [bytes].
Access: Online.
AC INI-Param: NqmSenderTable_PayloadSize
Unsigned32r/w
Constraints:
range: 28-1420
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.10
TOS value in the IP header.
Access: Online.
AC INI-Param: NqmSenderTable_IpTos
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.11
Receive timeout on expected packet.
Access: Online.
AC INI-Param: NqmSenderTable_Timeout
Unsigned32r/w
Constraints:
range: 0-32000
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.12
Maximum allowable Round Trip Time [msec], if exceeded some action
is needed.
Access: Online.
AC INI-Param: NqmSenderTable_RttThreshold
Unsigned32r/w
Constraints:
range: 0-32000
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.13
Maximum allowable Jitter [msec], if exceeded some action is
needed.
Access: Online.
AC INI-Param: NqmSenderTable_JitterThreshold
Unsigned32r/w
Constraints:
range: 0-32000
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.14
Maximum allowable Packet Loss, if exceeded some action is needed.
Access: Online.
AC INI-Param: NqmSenderTable_PacketLossThershold
Unsigned32r/w
Constraints:
range: 0-32000
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.15
Name of corresponding probe in probing table.
Access: Online.
AC INI-Param: NqmSenderTable_ProbingConfigName
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.16
Name of source interface.
Access: Online.
AC INI-Param: NqmSenderTable_SourceInterfaceName
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.5003.9.10.10.1.16.21.1.17
.1.3.6.1.4.1.5003.9.10.10.1.16.22 · 1 row entry · 10 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysNqmProbingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysNqmProbingTable'
acSysNqmProbingEntry row .1.3.6.1.4.1.5003.9.10.10.1.16.22.1
Column Syntax OID
Index Field for line. Internal parameter.
AC INI-Param: NqmProbingTable_Index
Unsigned32
Constraints:
range: 0-9
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.1
ROWSTATUS field for line. Internal parameter.
AC INI-Param: NqmProbingTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.2
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: NqmProbingTable_Action
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.3
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: NqmProbingTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.4
Probe descriptive name.
Access: Online.
AC INI-Param: NqmProbingTable_ProbeName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.5
Duration of probing session [sec].
Access: Online.
AC INI-Param: NqmProbingTable_Duration
Unsigned32r/w
Constraints:
range: 20-32000
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.6
Time interval between the start of two consecutive probing sessions
[sec].
Access: Online.
AC INI-Param: NqmProbingTable_Frequency
Unsigned32r/w
Constraints:
range: 0-32000
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.7
Life span of this probe [sec].
Access: Online.
AC INI-Param: NqmProbingTable_LifeSpan
Unsigned32r/w
Constraints:
range: 0-2000000000
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.8
start time of this probe - now | pending | yyyy:MM:dd:HH:mm:ss.
Access: Online.
AC INI-Param: NqmProbingTable_StartTime
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.9
Number of probing result entries to keep in the history file.
Access: Online.
AC INI-Param: NqmProbingTable_HistoryEntriesToKeep
Unsigned32r/w
Constraints:
range: 1-1000
.1.3.6.1.4.1.5003.9.10.10.1.16.22.1.10
.1.3.6.1.4.1.5003.9.10.10.1.16.23 · 1 row entry · 8 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysNqmResponderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysNqmResponderTable'
acSysNqmResponderEntry row .1.3.6.1.4.1.5003.9.10.10.1.16.23.1
Column Syntax OID
Index Field for line. Internal parameter.
AC INI-Param: NqmResponderTable_Index
Unsigned32
Constraints:
range: 0-9
.1.3.6.1.4.1.5003.9.10.10.1.16.23.1.1
ROWSTATUS field for line. Internal parameter.
AC INI-Param: NqmResponderTable_RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.5003.9.10.10.1.16.23.1.2
Mangement Field for ACTIONS. Internal parameter.
AC INI-Param: NqmResponderTable_Action
Enumerationr/w
Enumerated Values:
0none
.1.3.6.1.4.1.5003.9.10.10.1.16.23.1.3
Mangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: NqmResponderTable_ActionRes
Enumeration
Enumerated Values:
0succeeded
.1.3.6.1.4.1.5003.9.10.10.1.16.23.1.4
Responder descriptive name.
Access: Online.
AC INI-Param: NqmResponderTable_ResponderName
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.5003.9.10.10.1.16.23.1.5
Responder Enable.
Access: Online.
AC INI-Param: NqmResponderTable_Active
Unsigned32r/w
Constraints:
range: 0-1
.1.3.6.1.4.1.5003.9.10.10.1.16.23.1.6
Local transport layer port number.
Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970,
3980, 3990.
Access: Online.
AC INI-Param: NqmResponderTable_LocalPort
Unsigned32r/w
Constraints:
range: 3900-3990
.1.3.6.1.4.1.5003.9.10.10.1.16.23.1.7
Name of source interface.
Access: Online.
AC INI-Param: NqmResponderTable_SourceInterfaceName
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.4.1.5003.9.10.10.1.16.23.1.8
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21 · 1 row entry · 9 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysEthernetStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysEthernetStatusTable'
Ethernet relevant information
acSysEthernetStatusEntry row .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1
Column Syntax OID
The row's index.
On 8410 Systems:
Index 1 ? related to GBE port no.1 in the TER (Media).
Index 2 ? related to GBE port no.2 in the TER (Media).
Index 3 ? related to port 1A in PEM #1 (Control).
Index 4 ? related to port…
Unsigned32
Constraints:
range: 1-12
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.1
full-duplex or half-duplex connection.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0halfDuplex
1fullDuplex
2forceModeValue
3notAvailable
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.2
port speed.
AC INI-Param: N/A
Enumeration
Enumerated Values:
2forceModeValue
3notAvailable
10ac10Mbps
100ac100Mbps
1000ac1000Mbps
10000ac10Gbps
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.3
Status of ethernet port - active or not active.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notActive
1active
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.4
Port State.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0disabled
1blocking
2learning
3forwarding
10notApplicable
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.5
Power over Ethernet interface status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notApplicable
1active
2notActive
3poeAlarm
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.6
Power consumed by the port.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.7
The group which the port is a member of.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.8
Power over Ethernet interface status details.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-100
.1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.9
.1.3.6.1.4.1.5003.9.10.10.2.6.1.22 · 1 row entry · 7 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysWanStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysWanStatusTable'
Ethernet relevant information
acSysWanStatusEntry row .1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1
Column Syntax OID
The row's index.
On MSBG Only.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-4
.1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.1
AC INI-Param: N/A
Enumeration
Enumerated Values:
0ethernet
1t1
2sHDSL
3adslVdsl
4invalidPhyType
.1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.2
full-duplex or half-duplex connection.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0halfDuplex
1fullDuplex
2forceModeValue
3notAvailable
.1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.3
port speed.
AC INI-Param: N/A
Enumeration
Enumerated Values:
2forceModeValue
3notAvailable
10ac10Mbps
100ac100Mbps
1000ac1000Mbps
.1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.4
Status of ethernet port - active or not active.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notActive
1active
.1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.5
Port State.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0disabled
1blocking
2learning
3forwarding
10notApplicable
.1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.6
Power over Ethernet interface status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notApplicable
1active
2notActive
.1.3.6.1.4.1.5003.9.10.10.2.6.1.22.1.7
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23 · 1 row entry · 9 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysEthernetRedundantStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysEthernetRedundantStatusTable'
Ethernet relevant information for redundant board (relevant for HA system).  {@}Relevant only to M4K.
acSysEthernetRedundantStatusEntry row .1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1
Column Syntax OID
The row's index.
On MSBG only:
1-12 LAN interfaces.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-12
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.1
full-duplex or half-duplex connection.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0halfDuplex
1fullDuplex
2forceModeValue
3notAvailable
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.2
port speed.
AC INI-Param: N/A
Enumeration
Enumerated Values:
2forceModeValue
3notAvailable
10ac10Mbps
100ac100Mbps
1000ac1000Mbps
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.3
Status of ethernet port - active or not active.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notActive
1active
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.4
Port State.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0disabled
1blocking
2learning
3forwarding
10notApplicable
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.5
Power over Ethernet interface status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notApplicable
1active
2notActive
3poeAlarm
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.6
Power consumed by the port.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.7
The group which the port is a member of.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.8
Power over Ethernet interface status details.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-100
.1.3.6.1.4.1.5003.9.10.10.2.6.1.23.1.9
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21 · 1 row entry · 9 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysInterfaceStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysInterfaceStatusTable'
acSysInterfaceStatusEntry row .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1
Column Syntax OID
Related Interface index in the interface configuration table
(in case the table is empty - meaning there is only single
IP the index will appear with 0).
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-31
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.1
1 - IP Address.
2 - IPv6 Link-Local Address.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.2
The type assigned to the interface.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0oam
1media
2control
3oamAndMedia
4oamAndControl
5mediaAndControl
6oamAndMediaAndControl
11data
99maintenance
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.3
Interface configuration mode.
AC INI-Param: N/A
Enumeration
Enumerated Values:
3iPv6PrefixManual
4iPv6Manual
10iPv4Manual
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.4
IP Address (can be either IPv4 or IPv6) for this interface.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.5
The number of ?1? bits in this interface?s netmask.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-128
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.6
Default Gateway.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.7
VLAN ID of this interface.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-4094
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.8
16 character string of this interface?s name.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-15
.1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.9
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22 · 1 row entry · 25 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysDataInterfaceStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysDataInterfaceStatusTable'
acSysDataInterfaceStatusEntry row .1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1
Column Syntax OID
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-69
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.1
Interface name.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-70
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.2
IPv4 Address for this interface.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.3
Netmask for this interface.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-45
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.4
Status of interface can be one of the following: Unknown, Disabled,
Enabled, Connected or Disconnected.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-30
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.5
Description of the interface.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-30
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.6
Protocol is UP or Down.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.7
Time elapsed since the interface entered its current state (HH:MM:SS).
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-9
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.8
Time since the interface was created (HH:MM:SS).
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-9
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.9
the Maximum Transmission Unit (MTU) on the specified interface.
Can be: automatically, DHCP or value (in bytes).
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.10
DNS servers information for this interface.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.11
Total packets received.
AC INI-Param: N/A
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.12
Total bytes received.
AC INI-Param: N/A
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.13
No space in receive buffers available.
AC INI-Param: N/A
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.14
Bad packets received.
AC INI-Param: N/A
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.15
Total packets transmitted.
AC INI-Param: N/A
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.16
Total bytes transmitted.
AC INI-Param: N/A
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.17
No space in transmit buffers available.
AC INI-Param: N/A
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.18
Packet transmit problems.
AC INI-Param: N/A
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.19
This value determines time interval in minutes, on which the
rate sampling is done. The value is relevant to the columns
MinuteInputRate and MinuteOutputRate.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.20
The average received bits rate (bps) and packets rate (pps)
during the last ?acSysDataInterfaceStatusMinutes? minutes.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-100
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.21
The average transmitted bits rate (bps) and packets rate (pps)
during the last ?acSysDataInterfaceStatusMinutes? minutes.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-100
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.22
This value determines time interval in seconds on which the
rate sampling is done. The value is relevant to the columns
SecondInputRate and SecondOutputRate.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.23
The average received bits rate (bps) and packets rate (pps)
during the last ?acSysDataInterfaceStatusSeconds? seconds.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-100
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.24
The average transmitted bits rate (bps) and packets rate (pps)
during the last ?acSysDataInterfaceStatusSeconds? seconds.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-100
.1.3.6.1.4.1.5003.9.10.10.2.6.4.22.1.25
.1.3.6.1.4.1.5003.9.10.10.2.12.1 · 1 row entry · 13 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysNqmHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysNqmHistoryTable'
acSysNqmHistoryEntry row .1.3.6.1.4.1.5003.9.10.10.2.12.1.1
Column Syntax OID
Index of Sender from acSysNqmSenderTable.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-9
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.1
Internal index.
AC INI-Param: N/A
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.2
NULL terminated.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.3
Null terminated Yes/No or textual reason.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-16
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.4
round trip time [msec].
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-99999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.5
outging packet loss.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-999999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.6
incoming packet loss.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-999999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.7
sum of Rx and Tx packet loss.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-9999999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.8
outgoing jitter.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-999999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.9
incoming jitter.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-999999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.10
round trip jitter.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-9999999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.11
Conversation quality MOS.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-99999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.12
Listener quality MOS.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-99999
.1.3.6.1.4.1.5003.9.10.10.2.12.1.1.13
.1.3.6.1.4.1.5003.9.10.10.4.21 · 1 row entry · 16 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysModuleTable'
acSysModuleEntry row .1.3.6.1.4.1.5003.9.10.10.4.21.1
Column Syntax OID
The Module number in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.21.1.1
The slot number in the chassis. 1 being the bottom slot and
so on.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-12
.1.3.6.1.4.1.5003.9.10.10.4.21.1.2
The module's type.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0acUnknown
1acTrunkPack-08
2acMediaPack-108
3acMediaPack-124
20acTrunkPack-1600
22acTPM1100
23acTrunkPack-260-IpMedia
24acTrunkPack-1610
25acMediaPack-104
26acMediaPack-102
29acTrunkPack-1610-SB
30acTrunkPack-1610-IpMedia
31acTrunkPack-MEDIANT2000
32acTrunkPack-STRETTO2000
33acTrunkPack-IPMServer2000
34acTrunkPack-2810
35acTrunkPack-260-UN-IpMedia
36acTrunkPack-260-IpMedia-30Ch
37acTrunkPack-260-IpMedia-60Ch
38acTrunkPack-260-IpMedia-120Ch
39acTrunkPack-260RT-IpMedia-30Ch
40acTrunkPack-260RT-IpMedia-60Ch
41acTrunkPack-260RT-IpMedia-120Ch
42acTrunkPack-260
43acTrunkPack-260-UN
44acTPM1100-PCM
45acTrunkPack-6310
46acTPM6300
47acMediant1000
48acIPMedia3000
49acMediant3000
50acStretto3000
51acTrunkPack-6310-IpMedia
52acTrunkPack-6310-SB
53acATP-1610
54acATP-260
55acATP-260-UN
56acMediaPack-118
57acMediaPack114
58acMediaPack112
59acTrunkPack-6310-T3
60acMediant3000-T3
61acIPmedia3000-T3
62acTrunkPack-6310-T3-IpMedia
63acTrunkPack-8410
64acTrunkPack-8410-IpMedia
69acMediant-800-MSBG
76acMediant-500-MSBR
77acMediant-500-ESBC
84acMediant-500L-MSBR
85acMediant-500L-ESBC
250sA1
251sA2
252sA3
253acMediant1000CPUmodule
254acMediant1000IFDigitalModule
255acMediant1000IFAnalogModule
256acMediant1000IFBRIModule
257acMediant1000IPMediaModule
258acMediant600CPUmodule
259acMediant600IFDigitalModule
260acMediant600IFAnalogModule
261acMediant600IFBRIModule
262acMediant600IPMediaModule
265acMediant800CPUmodule
266acMediant800IFDigitalModule
267acMediant800IFAnalogModule
268acMediant800IFBRIModule
269acMediant800IFWANModule
270acMediant800IFWiFiModule
271acMediant800IPMediaModule
272acMediant800EthernetModule
273acMediant800IFT1WANModule
274acMediant800IFSHDSLModule
275acMediant800IFADSLModule
276acMediant1000IFWANModule
277acMediant1000IFT1WANModule
278acMediant1000IFSHDSLModule
279acMediant1000IFADSLModule
280acMediant4000CPUmodule
281acMediant1000EthernetModule
282acSWESBCModule
283acMediant500CPUmodule
284acMediant500IFDigitalModule
285acMediant500IFAnalogModule
286acMediant500IFBRIModule
287acMediant500IFWANModule
288acMediant500IFWiFiModule
289acMediant500IPMediaModule
290acMediant500EthernetModule
291acMediant500IFT1WANModule
292acMediant500IFSHDSLModule
293acMediant500IFADSLModule
294acMediant500IFGESFPModule
295acMediant4000MPModule
296acMediant-850-MSBG
297acMediant850CPUmodule
298acMediant850IFDigitalModule
299acMediant850IFAnalogModule
300acMediant850IFBRIModule
301acMediant850IFWANModule
302acMediant850IFWiFiModule
303acMediant850IPMediaModule
304acMediant850EthernetModule
305acMediant850IFT1WANModule
306acMediant850IFSHDSLModule
307acMediant850IFADSLModule
308acMediant2600CPUmodule
309acMediant2600MPModule
.1.3.6.1.4.1.5003.9.10.10.4.21.1.3
Is the module present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
.1.3.6.1.4.1.5003.9.10.10.4.21.1.4
List of active features as enabled by the license key. SA modules
return NULL.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-1400
.1.3.6.1.4.1.5003.9.10.10.4.21.1.5
The module's serial number.
For 6310 the serial number is the decimal form of the last
5 characters in the MAC Address.
SA modules return 0.
When the modules in the table are unavailable for audit (no
HA) (-1) is return…
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.21.1.6
The version of the SW being run in the module placed .
SA Modules return NULL.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.21.1.7
The operational state of the module. Determined internally by
the system.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.5003.9.10.10.4.21.1.8
Modules status with in the system. Designed to define the HA
state.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1acitveNonHA
2active
3redundant
4standAlone
5redundantNonHA
6notApplicable
.1.3.6.1.4.1.5003.9.10.10.4.21.1.9
Bit Field for the LEDs on the front of the module.
LSB in each nibble (half Byte) is 0 - constant, 1 - blinking.
3 MSB are the color -
0 - none
1- Green
2 - Red
3 - Yellow
4 - Orange
5 - Blue
7 - Gray (unknown).
AC INI…
OctetString
Constraints:
range: 0-50
.1.3.6.1.4.1.5003.9.10.10.4.21.1.10
Temperature of the board in degrees Celsius. SA Modules return
0.
AC INI-Param: N/A
Integer32
Constraints:
range: -1-100
.1.3.6.1.4.1.5003.9.10.10.4.21.1.11
Actions to be performed by the module.
Access: Instant.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
1reset
2switchOver
3actionDone
.1.3.6.1.4.1.5003.9.10.10.4.21.1.12
Field Replace Unit actions
Relevant to IF-Module only.
Access: Instant.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
1fruActionDone
2fruOutOfServiceAction
3fruBackToServiceAction
4fruNotApplicable
.1.3.6.1.4.1.5003.9.10.10.4.21.1.13
Field Replace Unit module's status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1moduleNotExist
2moduleExistOk
3moduleOutOfService
4moduleBackToServiceStart
5moduleMismatch
6moduleFaulty
7notApplicable
.1.3.6.1.4.1.5003.9.10.10.4.21.1.14
The number of physical interfaces in a module, analog or digital.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-4
.1.3.6.1.4.1.5003.9.10.10.4.21.1.15
The logical number as seen in the general trunk/analog-channel
table of the first port in the module in question.
Since analog and digital ports can be operational at once,
analog and digital ports may have same logical…
Unsigned32
Constraints:
range: 0-19
.1.3.6.1.4.1.5003.9.10.10.4.21.1.16
.1.3.6.1.4.1.5003.9.10.10.4.22 · 1 row entry · 9 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysFanTrayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysFanTrayTable'
acSysFanTrayEntry row .1.3.6.1.4.1.5003.9.10.10.4.22.1
Column Syntax OID
Fan-Tray's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.22.1.1
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-1
.1.3.6.1.4.1.5003.9.10.10.4.22.1.2
Is the Fan-Tray present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
.1.3.6.1.4.1.5003.9.10.10.4.22.1.3
The type of the Fan-Tray .
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-50
.1.3.6.1.4.1.5003.9.10.10.4.22.1.4
This object built as a bit-field which represents the Fan-Tray's
LEDs status.
The first four bites represent the System's LED status and
the last four bites represent the Shelf-LED?s status.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.22.1.5
The Severity of the whole fan tray according to the current
active alarm in the alarm table: Critical, Major or cleared.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0cleared
1indeterminate
2warning
3minor
4major
5critical
.1.3.6.1.4.1.5003.9.10.10.4.22.1.6
The fan's configured speed in Tach units (RPM/120). Each Byte
represents a fan.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.5003.9.10.10.4.22.1.7
The fan's mesured speed in Tach units (RPM/120). Each Byte represents
a fan.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.5003.9.10.10.4.22.1.8
A bit field which display the working status of each fan in
the Fan-Tray.
0 - Working
1 - Faulty.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-1
.1.3.6.1.4.1.5003.9.10.10.4.22.1.9
.1.3.6.1.4.1.5003.9.10.10.4.23 · 1 row entry · 6 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysPowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysPowerSupplyTable'
acSysPowerSupplyEntry row .1.3.6.1.4.1.5003.9.10.10.4.23.1
Column Syntax OID
Power-Supply's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.23.1.1
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.5003.9.10.10.4.23.1.2
Is the Power-Supply present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
.1.3.6.1.4.1.5003.9.10.10.4.23.1.3
PS?s HW version.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.23.1.4
A bit-field representation of the Power-Supply LEDs' status.
The first four bites represent the Power-Supply LED's status
and the last four bites represent the Fault LED's status.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.23.1.5
The Severity of the power-supply according to the current active
alarm in the alarm table.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1cleared
2indeterminate
3warning
4minor
5major
6critical
.1.3.6.1.4.1.5003.9.10.10.4.23.1.6
.1.3.6.1.4.1.5003.9.10.10.4.24 · 1 row entry · 5 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysPEMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysPEMTable'
acSysPEMEntry row .1.3.6.1.4.1.5003.9.10.10.4.24.1
Indexes
Column Syntax OID
PEM-Module's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.24.1.1
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.5003.9.10.10.4.24.1.2
Is the PEM-Module present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
.1.3.6.1.4.1.5003.9.10.10.4.24.1.3
PEM?s Type.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.24.1.4
Present the status of the electricity connector located on the
PEM card.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1connected
2disconnected
.1.3.6.1.4.1.5003.9.10.10.4.24.1.5
.1.3.6.1.4.1.5003.9.10.10.4.25.21 · 1 row entry · 6 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysSATTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysSATTable'
acSysSATEntry row .1.3.6.1.4.1.5003.9.10.10.4.25.21.1
Column Syntax OID
SAT-Module's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.5003.9.10.10.4.25.21.1.1
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 2-4
.1.3.6.1.4.1.5003.9.10.10.4.25.21.1.2
SAT?s Type.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.25.21.1.3
Sat's Init Information.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0detected
1reConfig
2reConfigTry2
3reConfigTry3
4notInitialized
5initIsMissing
6initWasReset
7initFail
8initInProgress
9initUpdateREFTable
10remoteKeepAlive
11initComplete
.1.3.6.1.4.1.5003.9.10.10.4.25.21.1.4
Is the Timig Unit present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1exist
2notExist
.1.3.6.1.4.1.5003.9.10.10.4.25.21.1.5
SAT's Timing Reference Selection.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0bITSNOREF
1rEFFromBITSA
2rEFFromBITSB
3bITSNOREF1
4rEFFromLineClock1
5rEFFromLineClock2
6rEFFromLineClock3
7rEFFromLineClock7
.1.3.6.1.4.1.5003.9.10.10.4.25.21.1.6
.1.3.6.1.4.1.5003.9.10.10.4.25.22 · 1 row entry · 8 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysSATFramersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysSATFramersTable'
acSysSATFramersEntry row .1.3.6.1.4.1.5003.9.10.10.4.25.22.1
Column Syntax OID
SAT-Module's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.5003.9.10.10.4.25.22.1.1
Framer's Index.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.5003.9.10.10.4.25.22.1.2
Framer Interface Status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0framerInitialized
1framerNotInitialized
.1.3.6.1.4.1.5003.9.10.10.4.25.22.1.3
Frame rLoop Back Reference.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0loopdisable
1loopenable
.1.3.6.1.4.1.5003.9.10.10.4.25.22.1.4
Framer Interface Type.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0e1CRC4
1e1CAS
2e1FAS
3t1D4
4t1ESF
5t12
.1.3.6.1.4.1.5003.9.10.10.4.25.22.1.5
Framer Transmit Control.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0systemClock
1aIS
2disableTransmit
.1.3.6.1.4.1.5003.9.10.10.4.25.22.1.6
Provides the alarm status of the clock interface.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0alarmClear
1lOFAlarm
2lOSAlarm
3aISAlarm
4aISInit
.1.3.6.1.4.1.5003.9.10.10.4.25.22.1.7
Is Used As PLL Clock indication.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0notUsed
1used
.1.3.6.1.4.1.5003.9.10.10.4.25.22.1.8
.1.3.6.1.4.1.5003.9.10.10.4.26.21 · 1 row entry · 2 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysPLLStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysPLLStatusTable'
acSysPLLStatusEntry row .1.3.6.1.4.1.5003.9.10.10.4.26.21.1
Column Syntax OID
Table's Index.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 0-1
.1.3.6.1.4.1.5003.9.10.10.4.26.21.1.1
PLL's Current Operating Mode.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0freeRun
1lockToRef1
2lockToRef2
3lockToLocal
4holdOver
.1.3.6.1.4.1.5003.9.10.10.4.26.21.1.2
.1.3.6.1.4.1.5003.9.10.10.4.27.21 · 1 row entry · 16 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysRedundantModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysRedundantModuleTable'
Relevant only to M4K.
acSysRedundantModuleEntry row .1.3.6.1.4.1.5003.9.10.10.4.27.21.1
Column Syntax OID
The Module number in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.1
The CPU slot number of the redundant board.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-12
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.2
The module's type.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0acUnknown
280acMediant4000CPUmodule
295acMediant4000MPModule
308acMediant2600CPUmodule
309acMediant2600MPModule
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.3
Is the module present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.4
List of active features as enabled by the license key. SA modules
return NULL.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-1400
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.5
The module's serial number.
For 6310 the serial number is the decimal form of the last
5 characters in the MAC Address.
SA modules return 0.
When the modules in the table are unavailable for audit (no
HA) (-1) is return…
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.6
The version of the SW being run in the module placed .
SA Modules return NULL.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.7
The operational state of the module. Determined internally by
the system.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.8
Modules status with in the system. Designed to define the HA
state.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1acitveNonHA
2active
3redundant
4standAlone
5redundantNonHA
6notApplicable
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.9
Bit Field for the LEDs on the front of the module.
LSB in each nibble (half Byte) is 0 - constant, 1 - blinking.
3 MSB are the color -
0 - none
1- Green
2 - Red
3 - Yellow
4 - Orange
5 - Blue
7 - Gray (unknown).
AC INI…
OctetString
Constraints:
range: 0-50
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.10
Temperature of the board in degrees Celsius. SA Modules return
0.
AC INI-Param: N/A
Integer32
Constraints:
range: -1-100
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.11
Actions to be performed by the module.
Access: Instant.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
1reset
3actionDone
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.12
Field Replace Unit actions
Relevant to IF-Module only.
Access: Instant.
AC INI-Param: N/A
Enumerationr/w
Enumerated Values:
1fruActionDone
2fruOutOfServiceAction
3fruBackToServiceAction
4fruNotApplicable
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.13
Field Replace Unit module's status.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1moduleNotExist
2moduleExistOk
3moduleOutOfService
4moduleBackToServiceStart
5moduleMismatch
6moduleFaulty
7notApplicable
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.14
The number of physical interfaces in a module, analog or digital.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-4
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.15
The logical number as seen in the general trunk/analog-channel
table of the first port in the module in question.
Since analog and digital ports can be operational at once,
analog and digital ports may have same logical…
Unsigned32
Constraints:
range: 0-19
.1.3.6.1.4.1.5003.9.10.10.4.27.21.1.16
.1.3.6.1.4.1.5003.9.10.10.4.27.22 · 1 row entry · 9 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysRedundantFanTrayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysRedundantFanTrayTable'
Relevant only to M4K.
acSysRedundantFanTrayEntry row .1.3.6.1.4.1.5003.9.10.10.4.27.22.1
Column Syntax OID
Fan-Tray's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.1
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-1
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.2
Is the Fan-Tray present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.3
The type of the Fan-Tray .
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-50
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.4
This object built as a bit-field which represents the Fan-Tray's
LEDs status.
The first four bites represent the System's LED status and
the last four bites represent the Shelf-LED?s status.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.5
The Severity of the whole fan tray according to the current
active alarm in the alarm table: Critical, Major or cleared.
AC INI-Param: N/A
Enumeration
Enumerated Values:
0cleared
1indeterminate
2warning
3minor
4major
5critical
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.6
The fan's configured speed in Tach units (RPM/120). Each Byte
represents a fan.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.7
The fan's mesured speed in Tach units (RPM/120). Each Byte represents
a fan.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.8
A bit field which display the working status of each fan in
the Fan-Tray.
0 - Working
1 - Faulty.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-1
.1.3.6.1.4.1.5003.9.10.10.4.27.22.1.9
.1.3.6.1.4.1.5003.9.10.10.4.27.23 · 1 row entry · 6 columns
Uses the mediant variant from /opt/observium/mibs/mediant.
Command help
Walk acSysRedundantPowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AC-SYSTEM-MIB' -M '/opt/observium/mibs/mediant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AC-SYSTEM-MIB::acSysRedundantPowerSupplyTable'
Relevant only to M4K.
acSysRedundantPowerSupplyEntry row .1.3.6.1.4.1.5003.9.10.10.4.27.23.1
Column Syntax OID
Power-Supply's index in the system.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.5003.9.10.10.4.27.23.1.1
The slot number in the chassis.
AC INI-Param: N/A
Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.5003.9.10.10.4.27.23.1.2
Is the Power-Supply present or missing.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1present
2missing
.1.3.6.1.4.1.5003.9.10.10.4.27.23.1.3
PS?s HW version.
AC INI-Param: N/A
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.27.23.1.4
A bit-field representation of the Power-Supply LEDs' status.
The first four bites represent the Power-Supply LED's status
and the last four bites represent the Fault LED's status.
AC INI-Param: N/A
OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.5003.9.10.10.4.27.23.1.5
The Severity of the power-supply according to the current active
alarm in the alarm table.
AC INI-Param: N/A
Enumeration
Enumerated Values:
1cleared
2indeterminate
3warning
4minor
5major
6critical
.1.3.6.1.4.1.5003.9.10.10.4.27.23.1.6