A3Com-IPXpolicy-r3-MIB Table View

This table enables and disables the use of policies,
policy attributes and the use of trusted neighbors
and their attributes.

a3ipxPolControlEntry row .1.3.6.1.4.1.43.2.11.1.1

A single entry in the Policy Control Table

Indexes

a3ipxPCPort

Column	Syntax	OID
a3ipxPCPortmandatory The port to which this Policy Control entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.11.1.1.1
a3ipxPCRteAdvCtlmandatory The object enables or disables the use of the 'advertisable' entries in the Route Policy Table.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.1.1.2
a3ipxPCRteAdvTypemandatory The object specifies whether only those routes listed as 'advertisable' in the Route Policy Table are advertised from this port (normal), or if only those routes that are not listed as 'advertisable' in the Route Pol…	Enumerationr/w Enumerated Values: 1 normal 2 inverse	.1.3.6.1.4.1.43.2.11.1.1.3
a3ipxPCRteRcvCtlmandatory The object enables or disables the use of the 'receivable' entries in the Route Policy Table.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.1.1.4
a3ipxPCRteRcvTypemandatory The object specifies whether only those routes listed as 'receivable' in the Route Policy Table are accepted from this port (normal), or if only those routes that are not listed as 'receivable' in the Route Policy Tab…	Enumerationr/w Enumerated Values: 1 normal 2 inverse	.1.3.6.1.4.1.43.2.11.1.1.5
a3ipxPCSvcAdvCtlmandatory The object enables or disables the use of the 'advertisable' entries in the Service Policy Table.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.1.1.6
a3ipxPCSvcAdvTypemandatory The object specifies whether only those routes listed as 'advertisable' in the Service Policy Table are advertised from this port (normal), or if only those routes that are not listed as 'advertisable' in the Service…	Enumerationr/w Enumerated Values: 1 normal 2 inverse	.1.3.6.1.4.1.43.2.11.1.1.7
a3ipxPCSvcRcvCtlmandatory The object enables or disables the use of the 'receivable' entries in the Service Policy Table.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.1.1.8
a3ipxPCSvcRcvTypemandatory The object specifies whether only those routes listed as 'receivable' in the Service Policy Table are accepted from this port (normal), or if only those routes that are not listed as 'receivable' in the Service Polic…	Enumerationr/w Enumerated Values: 1 normal 2 inverse	.1.3.6.1.4.1.43.2.11.1.1.9
a3ipxPCNbrAdvCtlobsolete This object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors to which routing and service reachability information is advertised. In other words, this object…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.1.1.10
a3ipxPCNbrRcvCtlobsolete The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which routing and service reachability information is allowed to be received. In other words…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.1.1.11
a3ipxPCNbrRcvTypeobsolete If this object is set to normal(1), then route and service reachability information is accepted only from those neighbors listed in the Neighbor Policy Table for which a3ipxPolNbrType = receive(2) or both(3). …	Enumerationr/w Enumerated Values: 1 normal 2 inverse	.1.3.6.1.4.1.43.2.11.1.1.12
a3ipxPCPolicyOverrideobsolete Policy Override is used to override the configured policies when the router issues responses to specific RIP or SAP requests. The configured policies are always applied for regular RIP or SAP updates. …	Enumerationr/w Enumerated Values: 1 policyOverride 2 noPolicyOverride	.1.3.6.1.4.1.43.2.11.1.1.13
a3ipxPCSvrRplyCtlmandatory This controls whether or not the router is permitted to respond to 'get nearest server' requests. If this object has the value bestSvrReply(1), then this router is permitted to respond to these requests. If this objec…	Enumerationr/w Enumerated Values: 1 bestSvrReply 2 noBestSvrReply	.1.3.6.1.4.1.43.2.11.1.1.14
a3ipxPCRipPolOverridemandatory RIP Policy Override is used to override the configured RIP policies when the router issues responses to specific RIP requests. The configured policies are always applied for regular RIP updates.	Enumerationr/w Enumerated Values: 1 policyOverride 2 noPolicyOverride	.1.3.6.1.4.1.43.2.11.1.1.15
a3ipxPCSapPolOverridemandatory SAP Policy Override is used to override the configured policies when the router issues responses to specific SAP requests. The configured policies are always applied for regular SAP updates.	Enumerationr/w Enumerated Values: 1 policyOverride 2 noPolicyOverride	.1.3.6.1.4.1.43.2.11.1.1.16

The IPX Route Policy Table controls the acceptance
of route reachability information from neighbors and
the advertisement of route reachability information
to neighbors.
          
If a3ipxPCRteRcvType is configured as normal, a route
is accepted if the network number for the route is in
the list of 'receivable' networks specified in this
table.  If a3ipxPCRteRcvType is configure as inverse, a
route is not accepted if the network number for the 
route is in the list of 'receivable' networks specified 
in this table.
          
If a3ipxPCRteAdvType is configured as normal, a route
is advertised if the network number for the route is in
the list of 'advertisable' networks specified in this
table.  If a3ipxPCRteAdvType is configure as inverse, a
route is not advertised if the network number for the 
route is in the list of 'advertisable' networks specified 
in this table.
          
Note, since this table allows ranges of routes to be
specified, all the entries should be examined when
determining if a specific route is affected by these
policies.  It is not sufficient to search for an instance
of a3ipxPolRteNet1 that matches the route in question.

a3ipxPolRteEntry row .1.3.6.1.4.1.43.2.11.2.1

A single entry in the Route Policy table

Indexes

a3ipxPolRtePort a3ipxPolRteNet1 a3ipxPolRteNet2

Column	Syntax	OID
a3ipxPolRtePortmandatory The IPX port to which this Receive Route Policy entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.11.2.1.1
a3ipxPolRteTypemandatory This object specifies whether this entry applies to receiving routes, advertising routes, or both.	Enumerationr/w Enumerated Values: 1 advertise 2 receive 3 both	.1.3.6.1.4.1.43.2.11.2.1.2
a3ipxPolRteNet1mandatory The IPX Network Number for which route information is accepted or rejected for this port. The value 0xfffffffe is used to represent the default route.	IPXNET Type Constraints: range: 4	.1.3.6.1.4.1.43.2.11.2.1.3
a3ipxPolRteNet2mandatory When the value of this object is a valid IPX network and different from a3ipxPolRteNet1, then this table entries specifies a range of IPX networks, with the value of a3ipxPolRteNet1 identifying the lower end of the r…	IPXNET Type Constraints: range: 4	.1.3.6.1.4.1.43.2.11.2.1.4
a3ipxPolRteStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.11.2.1.5

The IPX Policy Services Table controls the acceptance
of service reachability information from neighbors
and the advertisement of that information to neighbors.
          
If a3ipxPCSvcRcvType is configured as normal, a service
is accepted if its port number, server name, and
service type is in the list of tuples specified as 
'receivable' by this table.  If a3ipxPCSvcRcvType is 
configured as inverse, a service is not accepted if its 
port number, server name, and service type is in 
the list of tuples specified as 'receivable' by this 
table.
          
If a3ipxPCSvcAdvType is configured as normal, a service
is advertised if its network port, server name, and
service type is in the list of tuples specified as 
'advertisable' by this table.  If a3ipxPCSvcAdvType is 
configured as inverse, a service is not advertised if its 
port number, server name, and service type is in 
the list of tuples specified as 'advertisable' by this 
table.

a3ipxPolSvcEntry row .1.3.6.1.4.1.43.2.11.3.1

A single entry in the Receive Services Policy table.

Indexes

a3ipxPolSvcPort a3ipxPolSvcSvrName a3ipxPolSvcType

Column	Syntax	OID
a3ipxPolSvcPortmandatory The IPX port to which this Receive Svc Pol entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.11.3.1.1
a3ipxPolSvcEntryTypemandatory This object specifies whether this entry applies to receiving services, advertising services, or both.	Enumerationr/w Enumerated Values: 1 advertise 2 receive 3 both	.1.3.6.1.4.1.43.2.11.3.1.2
a3ipxPolSvcSvrNamemandatory This object contains the name of a server. A single wildcard (*) is allowed at the end of the name.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.43.2.11.3.1.3
a3ipxPolSvcTypemandatory The type of service for which information is accepted or rejected by this port. The value 'FFFF' acts as a wildcard for all service types.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.43.2.11.3.1.4
a3ipxPolSvcStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.11.3.1.5

This table defines a set of neighbors to which
the route and service reachability information is 
advertised.  This table also defines a set of
neighbors from which route and service reachability
information is accepted.
          
NOTE: this table is not supported by NETBuilders
running sw version 8.0 and greater.  The functionality
provided by this table has been replaced by
a3ipxPolRipNbrTable and a3ipxPolSapNbrTable.

a3ipxPolNbrEntry row .1.3.6.1.4.1.43.2.11.4.1

A single entry in the Policy Neighbor Table

Indexes

a3ipxPolNbrPort a3ipxPolNbrNet a3ipxPolNbrAddress

Column	Syntax	OID
a3ipxPolNbrPortobsolete The IPX port over which the Trusted Neighbor identified by this table entry can be reached.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.11.4.1.1
a3ipxPolNbrTypeobsolete This object specifies whether this entry applies to receiving information, advertising information, or both.	Enumerationr/w Enumerated Values: 1 advertise 2 receive 3 both	.1.3.6.1.4.1.43.2.11.4.1.2
a3ipxPolNbrNetobsolete The IPX Network number identifying the network to which the neighbor identified by this table entry is attached.	IPXNET Type Constraints: range: 4	.1.3.6.1.4.1.43.2.11.4.1.3
a3ipxPolNbrAddressobsolete The Mac Address of the Neighbor to whom route and service reachability information is to be advertised and from which route and service reachability information is accepted.		.1.3.6.1.4.1.43.2.11.4.1.4
a3ipxPolNbrStatusobsolete This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.11.4.1.5

This table enables or disables the use of
the entries in a3ipxPolRipNbrTable.  If
the use of the entries in that table is enabled,
this table also controls how they are interpreted.
In one case, RIP updates are accepted only from those 
IPX Neighbors listed in a3ipxPolRipNbrTable.  In the
other case, RIP updates are accepted only from those
IPX Neighbors not listed in a3ipxPolRipNbrTable.

a3ipxPolRipNbrCtlEntry row .1.3.6.1.4.1.43.2.11.5.1.1

Each entry in this table applies to a separate
NETBuilder port and controls those entries in
a3ipxPolRipNbrTable that correspond to the same
port.

Indexes

a3ipxPolRipNbrCtlPort

Column	Syntax	OID
a3ipxPolRipNbrCtlPortmandatory This NETBuilder port to which this RIP Neighbor Control entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.11.5.1.1.1
a3ipxPolRipNbrCtlAdvCtlmandatory This object enables or disables the use of the entries in the RIP Neighbor Policy Table (a3ipxPolRipNbrTable) that apply to neighbors to which routing information is advertised. In other words, this obj…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.5.1.1.2
a3ipxPolRipNbrCtlRcvCtlmandatory The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which routing information is allowed to be received. In other words, this object enables or…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.5.1.1.3
a3ipxPolRipNbrCtlRcvTypemandatory If this object is set to normal(1), then route information is accepted only from those neighbors listed in the Neighbor Policy Table for which a3ipxPolRipNbrType = receive(2) or both(3). If this object …	Enumerationr/w Enumerated Values: 1 normal 2 inverse	.1.3.6.1.4.1.43.2.11.5.1.1.4

This table defines a set of neighbors to which
the route information is advertised.  This table 
also defines a set of neighbors from which route 
information is accepted.

a3ipxPolRipNbrEntry row .1.3.6.1.4.1.43.2.11.5.2.1

A single entry in the Policy Neighbor Table

Indexes

a3ipxPolRipNbrPort a3ipxPolRipNbrNet a3ipxPolRipNbrAddress

Column	Syntax	OID
a3ipxPolRipNbrPortmandatory The IPX port over which the Trusted Neighbor identified by this table entry can be reached.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.11.5.2.1.1
a3ipxPolRipNbrTypemandatory This object specifies whether this entry applies to receiving information, advertising information, or both.	Enumerationr/w Enumerated Values: 1 advertise 2 receive 3 both	.1.3.6.1.4.1.43.2.11.5.2.1.2
a3ipxPolRipNbrNetmandatory The IPX Network number identifying the network to which the neighbor identified by this table entry is attached.	IPXNET Type Constraints: range: 4	.1.3.6.1.4.1.43.2.11.5.2.1.3
a3ipxPolRipNbrAddressmandatory The Mac Address of the Neighbor to whom route information is to be advertised and from which route information is accepted.		.1.3.6.1.4.1.43.2.11.5.2.1.4
a3ipxPolRipNbrStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.11.5.2.1.5

This table enables or disables the use of
the entries in a3ipxPolSapNbrTable.  If
the use of the entries in that table is enabled,
this table also controls how they are interpreted.
In one case, SAP updates are accepted only from those 
IPX Neighbors listed in a3ipxPolSapNbrTable.  In the
case, SAP updates are accepted only from those
IPX Neighbors not listed in a3ipxPolSapNbrTable.

a3ipxPolSapNbrCtlEntry row .1.3.6.1.4.1.43.2.11.5.3.1

Each entry in this table applies to a separate
NETBuilder port and controls those entries in
a3ipxPolSapNbrTable that correspond to the same
port.

Indexes

a3ipxPolSapNbrCtlPort

Column	Syntax	OID
a3ipxPolSapNbrCtlPortmandatory This NETBuilder port to which this SAP Neighbor Control entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.11.5.3.1.1
a3ipxPolSapNbrCtlAdvCtlmandatory This object enables or disables the use of the entries in the SAP Neighbor Policy Table (a3ipxPolSapNbrTable) that apply to neighbors to which service reachability information is advertised. In other w…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.5.3.1.2
a3ipxPolSapNbrCtlRcvCtlmandatory The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which service reachability information is allowed to be received. In other words, this obje…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.2.11.5.3.1.3
a3ipxPolSapNbrCtlRcvTypemandatory If this object is set to normal(1), then service reachability information is accepted only from those neighbors listed in the Neighbor Policy Table for which a3ipxPolSapNbrType = receive(2) or both(3). I…	Enumerationr/w Enumerated Values: 1 normal 2 inverse	.1.3.6.1.4.1.43.2.11.5.3.1.4

This table defines a set of neighbors to which
the service reachability information is advertised.  
This table also defines a set of neighbors from which 
service reachability information is accepted.

a3ipxPolSapNbrEntry row .1.3.6.1.4.1.43.2.11.5.4.1

A single entry in the Policy Neighbor Table

Indexes

a3ipxPolSapNbrPort a3ipxPolSapNbrNet a3ipxPolSapNbrAddress

Column	Syntax	OID
a3ipxPolSapNbrPortmandatory The IPX port over which the Trusted Neighbor identified by this table entry can be reached.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.11.5.4.1.1
a3ipxPolSapNbrTypemandatory This object specifies whether this entry applies to receiving information, advertising information, or both.	Enumerationr/w Enumerated Values: 1 advertise 2 receive 3 both	.1.3.6.1.4.1.43.2.11.5.4.1.2
a3ipxPolSapNbrNetmandatory The IPX Network number identifying the network to which the neighbor identified by this table entry is attached.	IPXNET Type Constraints: range: 4	.1.3.6.1.4.1.43.2.11.5.4.1.3
a3ipxPolSapNbrAddressmandatory The Mac Address of the Neighbor to whom service reachability information is to be advertised and from which service reachability information is accepted.		.1.3.6.1.4.1.43.2.11.5.4.1.4
a3ipxPolSapNbrStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.11.5.4.1.5