A3Com-IPSO-r1-MIB Table View

This table contains a set of parameters relating
to the configuration of IP security options.

a3IPsecureParamEntry row .1.3.6.1.4.1.43.2.12.3.1

Each entry in this table contains a set of IP security
parameters specific to a particular port.

Indexes

a3IPsecureParamPortIndex

Column	Syntax	OID
a3IPsecureParamPortIndexmandatory This identifies the IP port to which the security parameters in this entry apply.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.12.3.1.1
a3IPsecureParamCtlmandatory This object controls a number of parameters associated with IP security. Each parameter is represented by a specific bit. If the bit is set, the parameter is turned on. If the bit is not set, the parameter is turned …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.12.3.1.2
a3IPsecureLabelDefaultLevelmandatory This parameter applies to packets received over this port that have no classification level or authority flags. When such packets are received, the value of this parameter determines the IP security level that is att…	Enumerationr/w Enumerated Values: 1 none 2 topSecret 3 secret 4 confidential 5 unclassified	.1.3.6.1.4.1.43.2.12.3.1.3
a3IPsecureLabelDefaultAuthmandatory Like a3IPsecureLabelDefaultLevel, this parameter applies only to packets received over this port that have no classification level or authority flags. When such packets are received, the value of this parameter determ…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.12.3.1.4
a3IPsecureLabelSysLevelmandatory This parameter applies to packets originated by this system and sent over this port. When such packets are sent, the value of this parameter determines the IP security level that is attached to the packet before any …	Enumerationr/w Enumerated Values: 1 none 2 topSecret 3 secret 4 confidential 5 unclassified	.1.3.6.1.4.1.43.2.12.3.1.5
a3IPsecureLabelSysAuthmandatory Like a3IPsecureLabelSysLevel, this parameter applies only to packets originated by this system and sent over this port. When such packets are sent, the value of this parameter determines the Protection Authority flag…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.12.3.1.6
a3IPsecureMinLevelmandatory This defines the minimum classification level which is acceptable by this port. This applies to any packet which is entering or leaving this port. If the classification level is outside the range defined by the value …	Enumerationr/w Enumerated Values: 1 topSecret 2 secret 3 confidential 4 unclassified	.1.3.6.1.4.1.43.2.12.3.1.7
a3IPsecureMaxLevelmandatory This define the maximum classification level which is acceptable by this port. This applies to any packet which is entering or leaving this port. If the classification level is outside the range defined by the value o…	Enumerationr/w Enumerated Values: 1 topSecret 2 secret 3 confidential 4 unclassified	.1.3.6.1.4.1.43.2.12.3.1.8

This table enumerates all the combinations of Protection 
Authority flags that may be present in packets received
over any of this system's ports.

a3IPsecureAuthInEntry row .1.3.6.1.4.1.43.2.12.4.1

Each entry in this table contains a specific combination
of Protection Authority flags that are acceptable in packets
received over a specific port.

Indexes

a3IPsecureAuthInPort a3IPsecureAuthInFlags

Column	Syntax	OID
a3IPsecureAuthInPortmandatory This identifies the port to which this entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.12.4.1.1
a3IPsecureAuthInFlagsmandatory This identifies one combination of Protection Authority flags that is allowed to be present in any packet received by this port. The combination of Protection Authority flags that is allowed is determ…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.12.4.1.2
a3IPsecureAuthInMatchmandatory The value of this object determines whether the Protection Authority flags in a received packet must match the flags identified by the corresponding instance of a3IPsecureAuthInFlags exactly, or if they only have to mat…	Enumerationr/w Enumerated Values: 1 exact 2 any	.1.3.6.1.4.1.43.2.12.4.1.3
a3IPsecureAuthInStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.12.4.1.4

This table enumerates all the combinations of Protection 
Authority flags that are allowed to be present in packets 
transmitted over any of this system's ports.  This does not
apply to packets generated by this system.

a3IPsecureAuthOutEntry row .1.3.6.1.4.1.43.2.12.5.1

Each entry in this table contains a specific combination
of Protection Authority flags that are acceptable in packets
transmitted over a specific port.

Indexes

a3IPsecureAuthOutPort a3IPsecureAuthOutFlags

Column	Syntax	OID
a3IPsecureAuthOutPortmandatory This identifies the port to which this entry applies.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.12.5.1.1
a3IPsecureAuthOutFlagsmandatory This identifies one combination of Protection Authority flags that is allowed to be present in any packet transmitted by this port. The combination of Protection Authority flags that is allowed is det…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.2.12.5.1.2
a3IPsecureAuthOutMatchmandatory The value of this object determines whether the Protection Authority flags in a received packet must match the flags identified by the corresponding instance of a3IPsecureAuthOutFlags exactly, or if they only have to ma…	Enumerationr/w Enumerated Values: 1 exact 2 any	.1.3.6.1.4.1.43.2.12.5.1.3
a3IPsecureAuthOutStatusmandatory This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.43.2.12.5.1.4