A3COM-HUAWEI-SYS-MAN-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
10
Rows
10
Columns
59
h3cSysCurTable
table.1.3.6.1.4.1.43.45.1.10.2.3.1.2.1
·
1 row entry
·
5 columns
The current status of system. A configuration file, an image file and bootrom information are used to describe the current status.
An entry of h3cSysCurTable.
Indexes
h3cSysCurEntPhysicalIndex
| Column | Syntax | OID |
|---|---|---|
|
h3cSysCurEntPhysicalIndex
The value of this object is the entity index
which depends on the implementation of ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is the unit ID for XRN devices , 0 for non-XRN device which has o… |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.1 |
|
h3cSysCurCFGFileIndex
The startup configuration file currently used by the specified entity.
If the value of it is zero, no configuration file is used. It will be the value of corresponding h3cSysCFGFileIndex in h3cSysCFGFileTable. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.2 |
|
h3cSysCurImageIndex
The image file currently used by the specified entity.
It will be the value of corresponding h3cSysImageIndex in h3cSysImageTable. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.3 |
|
h3cSysCurBtmFileName
The bootrom file currently used by the specified entity.
|
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.4 |
|
h3cSysCurUpdateBtmFileName
The default value of this object is the same as the value of
h3cSysCurBtmFileName. The value will be changed after updating the bootrom successfully. This bootrom will take effect on next startup. |
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.5 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3
·
1 row entry
·
8 columns
A reload parameters set table.
The table is exclusively used for reloading.
When reloading action finished, the value of the table may be empty or still exist.
If the mainboard in non-XRN device or all the units of the fabric in XRN device are
reloaded,then the table will be refreshed.
Entry of h3cSysReloadScheduleTable.
Indexes
h3cSysReloadScheduleIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
h3cSysReloadScheduleIndex
The index of h3cSysReloadScheduleTable. There are two parts
for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + … |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.1 |
||||||||||||
|
h3cSysReloadEntity
The value of h3cSysReloadEntity indicates an entry in entPhysicalTable,
which is the physical entity to be reloaded. If ENTITY-MIB is not supported,the value for this object is the unit ID for XRN devices… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.2 |
||||||||||||
|
h3cSysReloadCfgFile
The value indicates an entry in h3cSysCFGFileTable.
It defines a configuration file for reload action. It is the value of corresponding h3cSysCFGFileIndex in h3cSysCFGFileTable. The zero value means no configuration fil… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.3 |
||||||||||||
|
h3cSysReloadImage
The value indicates an entry in h3cSysImageTable.
It defines an image file for reload action. It is the value of corresponding h3cSysImageIndex in h3cSysImageTable. If dual image is supported, the main im… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.4 |
||||||||||||
|
h3cSysReloadReason
The reason of system's reloading.
It is a zero length octet string when not set. |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.5 |
||||||||||||
|
h3cSysReloadScheduleTime
Specify the local time at which the reload action will
occur. we will only take octet strings with length 8 for this object which indicates the local time of the switch. The maximum scheduled interval between the specif… |
OctetStringr/w Constraints: range: 8-8 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.6 |
||||||||||||
|
h3cSysReloadRowStatus
If one of the value of h3cSysReloadEntity,h3cSysReloadImage
is invalid, the value of h3cSysReloadRowStatus can not be set to the value of ACTIVE. A valid entry means the specified element is available in … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.7 |
||||||||||||
|
h3cSysReloadScheduleTagList
It specifies a tag list for the entry.
|
SNMP-TARGET-MIBSnmpTagListr/w Textual Convention: SNMP-TARGET-MIBSnmpTagList OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.8 |
h3cSysImageTable
table.1.3.6.1.4.1.43.45.1.10.2.3.1.4.2
·
1 row entry
·
5 columns
The system image management table.
When 'copy srcfile destfile' is executed via the CLI, if destfile is not existed,
then h3cSysImageType of the new file will be 'none'; otherwise h3cSysImageType keeps its current value.
When 'move srcfile destfile' is executed via the CLI, h3cSysImageType and h3cSysImageIndex
remain the same while h3cSysImageLocation changes.
When 'rename srcfile' is executed via the CLI,h3cSysImageType and h3cSysImageIndex remain the same
while h3cSysImageName changes.
When 'delete srcfile' is executed via the CLI, the file is deleted from h3cSysImageTable
while index of the file keeps and will not be allocated.
An entity image entry. Each entry consists of information of an entity image.
The h3cSysImageIndex exclusively defines an image file.
The h3cSysImageIndex exclusively defines an image file.
Indexes
h3cSysImageIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
h3cSysImageIndex
There are two parts for the index depicted as follows:
31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + image index + +++++++++++++++++++++++++++++++++++ … |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.1 |
||||||||||||||||
|
h3cSysImageName
The file name of the image. It MUST NOT contain the path of the file.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.2 |
||||||||||||||||
|
h3cSysImageSize
Size of the file in bytes.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.3 |
||||||||||||||||
|
h3cSysImageLocation
The directory path of the image.
Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices:… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.4 |
||||||||||||||||
|
h3cSysImageType
It indicates the reloading sequence attribute of the image.
For devices which support dual image: If the value is 'main(1)',the image will be the first image in the next reloading procedure… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.5 |
h3cSysCFGFileTable
table.1.3.6.1.4.1.43.45.1.10.2.3.1.5.2
·
1 row entry
·
4 columns
A table of configuration files in this system. At present, the system doesn't support dual configure file, it should act as 'dual image' if dual configure file is supported.
A configuration file entry. Each entry consists of information of
a configuration file.
h3cSysCFGFileIndex exclusively decides a configuration file.
a configuration file.
h3cSysCFGFileIndex exclusively decides a configuration file.
Indexes
h3cSysCFGFileIndex
| Column | Syntax | OID |
|---|---|---|
|
h3cSysCFGFileIndex
There are two parts for the index depicted as follows:
31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + cfgFile index + +++++++++++++++++++++++++++++++++++ … |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.1 |
|
h3cSysCFGFileName
Configuration file name. The name should not include the colon (:)
character as it is a special separator character used to delineate the device name, partition name and the file name. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.2 |
|
h3cSysCFGFileSize
Size of the file in bytes. Note that it does
not include the size of the filesystem file header. File size will always be non-zero. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.3 |
|
h3cSysCFGFileLocation
The directory path of the image.
Its form should be the same as what defined in filesystem. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices: … |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.4 |
h3cSysBtmLoadTable
table.1.3.6.1.4.1.43.45.1.10.2.3.1.6.2
·
1 row entry
·
6 columns
This table is used to update the bootrom and show the results of the update operation. The bootrom files are listed at the h3cFlhFileTable. These files are used to update bootrom.
Entries in the h3cSysBtmLoadTable are created and deleted using
the h3cSysBtmRowStatus object.
When a new row is being created and the number of entries is
h3cSysBtmLoadMaxNumber, the row with minimal value…
the h3cSysBtmRowStatus object.
When a new row is being created and the number of entries is
h3cSysBtmLoadMaxNumber, the row with minimal value…
Indexes
h3cSysBtmLoadIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
h3cSysBtmLoadIndex
The index of h3cSysBtmLoadTable. There are two parts for this
index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + rand… |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.1 |
||||||||||||
|
h3cSysBtmFileName
The bootrom file name is determined by the users. The file must
exist in corresponding entity. The validity of the bootrom file will be identified by system. If the file is invalid, the bootrom should fa… |
OctetStringr/w Constraints: range: 1-64 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.2 |
||||||||||||
|
h3cSysBtmFileType
main(1) - The effective bootrom file.
none(2) - The noneffective file. When bootrom is being updated, this object must be set to main(1). When bootrom is updated successfully, this object s… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.3 |
||||||||||||
|
h3cSysBtmRowStatus
Only support active(1), createAndGo(4), destroy(6). When a row
is created successfully, the value of this object should be active(1), the value of h3cSysBtmFileName and h3cSysBtmFileType can not be modified by users. … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.4 |
||||||||||||
|
h3cSysBtmErrorStatus
This object shows the status of the specified operation after
creating a row. invalidFile(1) - file is invalid. inProgress(2) - the operation is in progress. success(3) - the operation was done successfully. failed… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.5 |
||||||||||||
|
h3cSysBtmLoadTime
This object indicates operation time.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.6 |
h3cSysPackageTable
table.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2
·
1 row entry
·
10 columns
The system package management table.
An software package entry. Each entry consists of information of
an software package.
an software package.
Indexes
h3cSysPackageIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
h3cSysPackageIndex
There are two parts for the index depicted as follows:
31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + package index + +++++++++++++++++++++++++++++++++++ … |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.1 |
||||||||
|
h3cSysPackageName
The file name of the package. It MUST NOT contain the path
of the file. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.2 |
||||||||
|
h3cSysPackageSize
Size of the file in bytes.
|
Unsigned32 Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.3 |
||||||||
|
h3cSysPackageLocation
The directory path of the package.
Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.4 |
||||||||
|
h3cSysPackageType
It indicates the type of the package file.
boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic sys… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.5 |
||||||||
|
h3cSysPackageAttribute
It indicates the attribute of the package file.
If the value is 'primary', the package will be the first package in the next reloading procedure. If the value is 'secondary', the package will be used if the primary pac… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.6 |
||||||||
|
h3cSysPackageStatus
It indicates the status of the package file. If this file is used in the
current system, its status is 'active'. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.7 |
||||||||
|
h3cSysPackageDescription
It is the description of the package.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.8 |
||||||||
|
h3cSysPackageFeature
Indicate the feature of the package. Different package files
could be the same feature. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.9 |
||||||||
|
h3cSysPackageVersion
Indicate the version of the package.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.10 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.4
·
1 row entry
·
5 columns
A table of package file operate.
An operate request entry.
Indexes
h3cSysPackageOperateIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
h3cSysPackageOperateIndex
The unique index value of a row in this table.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.1 |
||||||||||||
|
h3cSysPackageOperatePackIndex
Specify the package file in the h3cSysPackageTable.
|
Integer32r/w Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.2 |
||||||||||||
|
h3cSysPackageOperateStatus
activate or deactivate a package in the h3cSysPackageTable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.3 |
||||||||||||
|
h3cSysPackageOperateRowStatus
the status of this table entry.
When the status is active all the object's value in the entry is not allowed to modified. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.4 |
||||||||||||
|
h3cSysPackageOperateResult
the result of the operation.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.5 |
h3cSysIpeFileTable
table.1.3.6.1.4.1.43.45.1.10.2.3.1.8.2
·
1 row entry
·
4 columns
The system IPE file manage table.
An IPE package file entry. Each entry consists of information of
an IPE package file.
h3cSysIpeFileIndex exclusively decides an IPE file.
an IPE package file.
h3cSysIpeFileIndex exclusively decides an IPE file.
Indexes
h3cSysIpeFileIndex
| Column | Syntax | OID |
|---|---|---|
|
h3cSysIpeFileIndex
There are two parts for the index depicted as follows:
31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + IPE index + +++++++++++++++++++++++++++++++++++ … |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.1 |
|
h3cSysIpeFileName
The file name of the IPE file. It MUST NOT contain the path of
the file. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.2 |
|
h3cSysIpeFileSize
Size of the file in bytes.
|
Unsigned32 Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.3 |
|
h3cSysIpeFileLocation
The directory path of the IPE file.
Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.4 |
h3cSysIpePackageTable
table.1.3.6.1.4.1.43.45.1.10.2.3.1.8.3
·
1 row entry
·
7 columns
The IPE package file table. It shows the package files in the IPE file.
An entry of the h3cIpePackageTable. Indexed by
h3cSysIpeFileIndex and h3cSysIpePackageIndex.
h3cSysIpeFileIndex and h3cSysIpePackageIndex.
Indexes
h3cSysIpeFileIndex h3cSysIpePackageIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
h3cSysIpePackageIndex
It is the IPE package index; IPE Package Index
is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value ba… |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.1 |
||||||||
|
h3cSysIpePackageName
The file name of the package file.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.2 |
||||||||
|
h3cSysIpePackageSize
Size of the package file in bytes.
|
Unsigned32 Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.3 |
||||||||
|
h3cSysIpePackageType
It indicates the type of the package file.
boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic system … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.4 |
||||||||
|
h3cSysIpePackageDescription
It is the description of the package.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.5 |
||||||||
|
h3cSysIpePackageFeature
Indicate the feature of the package.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.6 |
||||||||
|
h3cSysIpePackageVersion
The version of the package.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.7 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.4
·
1 row entry
·
5 columns
A table of IPE file operate.
An operate request entry.
Indexes
h3cSysIpeFileOperateIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
h3cSysIpeFileOperateIndex
The unique index value of a row in this table.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.1 |
||||||||||||
|
h3cSysIpeFileOperateFileIndex
Specify the IPE file in the h3cSysIpeFileTable. This IPE file
will be unpacked to package files. |
Integer32r/w Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.2 |
||||||||||||
|
h3cSysIpeFileOperateAttribute
It indicates the attribute of the IPE file when it is used in the reloading.
If the value is 'primary', the packages in the IPE file will be the first packages in the next reloading procedure. If the value is 'secondary… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.3 |
||||||||||||
|
h3cSysIpeFileOperateRowStatus
the status of this table entry.
When the status is active all the object's value in the entry is not allowed to modified. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.4 |
||||||||||||
|
h3cSysIpeFileOperateResult
the result of the operation.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.5 |