A3COM-HUAWEI-SNA-DLSW-MIB Table View

A list of tcp transport connections.

dlswRemotePeerEntry row .1.3.6.1.4.1.43.45.1.2.34.2.1.1

A list of remote peer information

Indexes

dlswRemotePeerAddr

Column	Syntax	OID
dlswRemotePeerAddr The remote peer address for this transport connection.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.1
dlswRemotePeerVersion This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from t…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.2
dlswRemotePeerVendorID This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw.…	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.3
dlswRemotePeerPaceWindInit The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified and granted by the first flow control indication the partner…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.4
dlswRemotePeerNumOfTcpSessionsobsolete Number of TCP sessionss.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.5
dlswRemotePeerVersionString This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string is vendor-specific. This information is obtained from a DLSw…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.6
dlswRemotePeerIsConfig The current remote peer is configrured when the value is 'yes'.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.7
dlswRemotePeerSetStateToConfigobsolete When the value is set 'yes' from 'no', dlswRemotePeerIsConfig will change from 'no' to 'yes'.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.8
dlswRemotePeerCost The cost for remote peer.	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.9
dlswRemotePeerKeepAlive The keepalive interval value.	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.10
dlswRemotePeerLf The the largest frame size.	LFSizer/w Type Values: 516 lfs516 1470 lfs1470 1500 lfs1500 2052 lfs2052 4472 lfs4472 8144 lfs8144 11407 lfs11407 11454 lfs11454 17800 lfs17800 65535 unknown	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.11
dlswRemotePeerTcpQueneMax The max tcp queue value.	Integer32r/w Constraints: range: 50-2000	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.12
dlswRemotePeerHaveBackup There is another remote peer whitch is configrued as the backup of the current remote peer .	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.13
dlswRemotePeerIsBackup The current remote peer is configrued as the backup of another configured remote peer .	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.14
dlswRemotePeerBackupAddr It is the IP ADDRESS of an configured remote peer of whitch the current remote peer is configrued as the backup	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.15
dlswRemotePeerLinger Buckup Peer linger	Integer32r/w Constraints: range: 0-1440	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.16
dlswRemotePeerLinkState The state of this tcp transport connection.	Enumeration Enumerated Values: 1 connecting 2 initCapExchange 3 connected 4 quiescing 5 disconnecting 6 disconnected	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.17
dlswRemotePeerRecvPacks The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.18
dlswRemotePeerSendPacks The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.19
dlswRemotePeerDrops The number of Switch-to-Switch Protocol (SSP) messages dropped on this tcp transport connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.20
dlswRemotePeerUptime The amount of time (in seconds ) since this transport connection last entered the 'connected' state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.21
dlswRemotePeerEntryStatus This object is used by the manager to create or delete the row entry in the dlswRemotePeerTable following the EntryStatus textual convention.	EntryStatusr/w Type Values: 1 valid 2 createRequest 3 underCreation 4 invalid	.1.3.6.1.4.1.43.45.1.2.34.2.1.1.22

The list of bridge group whitch has been created.

dlswBridgeEntry row .1.3.6.1.4.1.43.45.1.2.34.3.1.1

The list of bridge information

Indexes

dlswBridgeNum

Column	Syntax	OID
dlswBridgeNum This value identifies the bridge number .	Integer32 Constraints: range: 1-63	.1.3.6.1.4.1.43.45.1.2.34.3.1.1.1
dlswBridgeStatus The 'DeleteLine' value means deleting a conceptual row object. The 'createLine' value means adding a conceptual row object.	CreateLineFlagr/w Type Values: 1 createLine 2 deleteLine	.1.3.6.1.4.1.43.45.1.2.34.3.1.1.2

The list of interfaces on which DLSw is active.

dlswBridgeIfEntry row .1.3.6.1.4.1.43.45.1.2.34.3.2.1

The list of bridge interface information

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
dlswBridgeIfBriGru This value identifies the bridge number attached to the interface.	Integer32r/w Constraints: range: 1-63	.1.3.6.1.4.1.43.45.1.2.34.3.2.1.1
dlswBridgeIfName The name of the interface.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.2.34.3.2.1.2
dlswBridgeIfStatus This value whitch is equal to 'invalid' identifies to delete a conceptual row	EntryStatusr/w Type Values: 1 valid 2 createRequest 3 underCreation 4 invalid	.1.3.6.1.4.1.43.45.1.2.34.3.2.1.3

This table contains locations of MAC addresses.
They are local and reachable

dlswLocMacEntry row .1.3.6.1.4.1.43.45.1.2.34.4.1.1

Information of table

Indexes

dlswLocMacHashIndex dlswLocMacHashIndexSeqNum

Column	Syntax	OID
dlswLocMacHashIndex The hash value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.2.34.4.1.1.1
dlswLocMacHashIndexSeqNum The sequence num with smae hash value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.2.34.4.1.1.2
dlswLocMacMac The MAC address.	MacAddressNC Type Constraints: range: 0 range: 6	.1.3.6.1.4.1.43.45.1.2.34.4.1.1.3
dlswLocMacLocalInterfaceName The value is the interface name when dlswLocMacLocationType is 'local'.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.2.34.4.1.1.4

This table is the circuit representation in the DLSw
entity. Virtual data links are used to represent any internal
end stations.  There is a conceptual row associated with
each data link.  Thus, for circuits without an intervening
transport connection, there are two conceptual rows
for each circuit.
          
The table consists of the circuits being established,
established, and as an implementation option, circuits that
have been disconnected.  For circuits carried over
transport connections, an entry is created after
the CUR_cs was sent or received.  For circuits between
two locally attached devices, or internal virtual MAC
addresses, an entry is created when the equivalent of
CUR_cs sent/received status is reached.
          
End station 1 (S1) and End station 2 (S2) are used to
represent the two end stations of the circuit.
S1 is always an end station which is locally attached.
S2 may be locally attached or remote.  If it is locally
attached, the circuit will be represented by two rows indexed
by (A, B) and (B, A) where A & B are the relevant MACs/SAPs.
          
The table may be used to store the causes of disconnection of
circuits.  It is recommended that the oldest disconnected
circuit entry be removed from this table when the memory
space of disconnected circuits is needed.

dlswCircuitEntry row .1.3.6.1.4.1.43.45.1.2.34.5.1.1

the list of circuit information

Indexes

dlswCircuitS1CircuitId

Column	Syntax	OID
dlswCircuitS1CircuitId The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.1
dlswCircuitS1Mac The MAC Address of End Station 1 (S1) used for this circuit.	MacAddressNC Type Constraints: range: 0 range: 6	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.2
dlswCircuitS1Sap The SAP at End Station 1 (S1) used for this circuit.	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.3
dlswCircuitS2Mac The MAC Address of End Station 2 (S2) used for this circuit.	MacAddressNC Type Constraints: range: 0 range: 6	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.4
dlswCircuitS2Sap The SAP at End Station 2 (S2) used for this circuit.	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.5
dlswCircuitS1IfIndex The ifEntry index of the local interface through which S1 can be reached.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.6
dlswCircuitS1Ifname The name of the interface whose Ifdex is dlswCircuitS1IfIndex.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.7
dlswCircuitS1DlcType The DLC protocol in use between the DLSw node and S1.	DlcType Type Values: 1 other 2 na 3 llc 4 sdlc 5 qllc	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.8
dlswCircuitS2Locationobsolete The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively.	EndStationLocation Type Values: 1 other 2 internal 3 remote 4 local	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.9
dlswCircuitS2TAddress If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.10
dlswCircuitS2CircuitId The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.11
dlswCircuitOrigin This object specifies which of the two end stations initiated the establishment of this circuit.	Enumeration Enumerated Values: 1 s1 2 s2	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.12
dlswCircuitEntryTime The amount of time (in hundredths of a second) since this circuit table conceptual row was created.	hundredths of a secondSNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.13
dlswCircuitStateTime The amount of time (in hundredths of a second) since this circuit entered the current state.	hundredths of a secondSNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.14
dlswCircuitState The current state of this circuit. The agent, implementation specific, may choose to keep entries for some period of time after circuit disconnect, so the manager can gather the time and cause of disconnection. …	Enumeration Enumerated Values: 1 disconnected 2 circuitStart 3 resolvePending 4 circuitPending 5 circuitEstablished 6 connectPending 7 contactPending 8 connected 9 disconnectPending 10 haltPending 11 haltPendingNoack 12 circuitRestart 13 restartPending	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.15
dlswCircuitPriorityobsolete The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw node does not support DLSw circuit priority, the value `u…	Enumeration Enumerated Values: 1 unsupported 2 low 3 medium 4 high 5 highest	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.16
dlswCircuitFCSendGrantedUnits The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control indication from the partner DLSw. The value zero…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.17
dlswCircuitFCSendCurrentWndw The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is authorized to send, if it were to receive a flow control in…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.18
dlswCircuitFCRecvGrantedUnits The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for an additional flow control indication from this DLSw. …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.19
dlswCircuitFCRecvCurrentWndw The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be authorizing its DLSw partner to send, if this DLSw were to sen…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.20
dlswCircuitFCLargestRecvGrantedobsolete The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any time, but the largest window size as represented by FCIND op…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.21
dlswCircuitFCLargestSendGrantedobsolete The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be returned if this circuit is not running the DLS…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.2.34.5.1.1.22

The table defines parameters for the interfaces with the 
encapunation of SDLC.

dlswSdlcPortEntry row .1.3.6.1.4.1.43.45.1.2.34.6.1.1

Information of table

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
dlswSdlcPortSerialName The name of serial port.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.1
dlswSdlcPortEncap The encapunation of the interface.	Enumeration Enumerated Values: 1 sdlc 2 ppp 3 other	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.2
dlswSdlcPortRole The SDLC role of interface.	Enumerationr/w Enumerated Values: 1 primary 2 seconday 3 norole	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.3
dlswSdlcPortVmac Define virtual mac address.	MacAddressNCr/w Type Constraints: range: 0 range: 6	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.4
dlswSdlcPortHoldq Size of hold queue.	Integer32r/w Constraints: range: 20-255	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.5
dlswSdlcPortK Size of local send window.	Integer32r/w Constraints: range: 1-7	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.6
dlswSdlcPortModule Size of modulus.	Enumerationr/w Enumerated Values: 8 m8 128 m128	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.7
dlswSdlcPortN1 Max number of bits for incoming frames.	Integer32r/w Constraints: range: 1-17680	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.8
dlswSdlcPortN2 Number of timers to retry an operation.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.9
dlswSdlcPortPollPauseTimer Time between polls for each secondary SDLC station. The unit is thousandth of a second.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.10
dlswSdlcPortSimultaneousEnable Activate SDLC two-way simultaneous mode.	Enumerationr/w Enumerated Values: 1 enable 2 disenable	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.11
dlswSdlcPortT1 Time to wait for a reply to a frame.	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.12
dlswSdlcPortT2 Time to wait for a reply used by secondary station.	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.13
dlswSdlcPortNrziEncodingobsolete Set line code to nrzi encoding mode.	Enumerationr/w Enumerated Values: 1 enable 2 disenable	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.14
dlswSdlcPortIdleMarkEnableobsolete Idle in mark mode.	Enumerationr/w Enumerated Values: 1 enable 2 disenable	.1.3.6.1.4.1.43.45.1.2.34.6.1.1.15

The table defines the virtual MAC addresses for those
SDLC link stations that participate in data link switching.

dlswSdlcLsEntry row .1.3.6.1.4.1.43.45.1.2.34.6.2.1

Information of table

Indexes

RFC1213-MIBifIndex dlswSdlcLsAddress

Column	Syntax	OID
dlswSdlcLsAddress Define SDLC address.	Integer32 Constraints: range: 1-254	.1.3.6.1.4.1.43.45.1.2.34.6.2.1.1
dlswSdlcLsLocalId The value is XID.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.43.45.1.2.34.6.2.1.2
dlswSdlcLsRemoteMac The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned	MacAddressNCr/w Type Constraints: range: 0 range: 6	.1.3.6.1.4.1.43.45.1.2.34.6.2.1.3
dlswSdlcLsSsap Source SAP of partner.	Integer32r/w Constraints: range: 1-254	.1.3.6.1.4.1.43.45.1.2.34.6.2.1.4
dlswSdlcLsDsap Destination SAP of partner.	Integer32r/w Constraints: range: 1-254	.1.3.6.1.4.1.43.45.1.2.34.6.2.1.5
dlswSdlcLsStatus This object is used by the manager to create or delete the row entry in the DlswSdlcLsTable following the EntryStatus textual convention.	EntryStatusr/w Type Values: 1 valid 2 createRequest 3 underCreation 4 invalid	.1.3.6.1.4.1.43.45.1.2.34.6.2.1.6

The table defines parameters for the interfaces with the 
encapunation of Llc2.

dlswLlc2PortEntry row .1.3.6.1.4.1.43.45.1.2.34.7.1.1

Information of table

Indexes

RFC1213-MIBifIndex dlswBridgeIfBriGru

Column	Syntax	OID
dlswLLC2PortAckDelayTime Max time allows I-frames incoming without replay ACK.	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.1
dlswLLC2PortAckMax Max number of I-frames received before ACK.	Integer32r/w Constraints: range: 1-127	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.2
dlswLLC2PortLocalWnd Max number of I-frames to send before received ACK.	Integer32r/w Constraints: range: 1-127	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.3
dlswLLC2PortModulus Modulus of LLC2.	Enumerationr/w Enumerated Values: 8 m8 128 m128	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.4
dlswLLC2PortN2 Retry times of operations.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.5
dlswLLC2PortT1 Waiting for ACK time after sent a I-frame.	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.6
dlswLLC2PortTbusyTime Waiting time while other LLC2 station is in busy state.	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.7
dlswLLC2PortTpfTime Waiting time after a P frame is sent.	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.8
dlswLLC2PortTrejTime Waiting time after a REJ frame is sent.	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.9
dlswLLC2PortTxqMax Queue for sending llc2 I-frames.	Integer32r/w Constraints: range: 20-200	.1.3.6.1.4.1.43.45.1.2.34.7.1.1.10