A10-AX-TRAPS
- Source file
A10-AX-TRAPS- Last revised
- Not declared
Imported Objects
Objects (11)
Showing 11 of 11 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.22610.2.4.2.100 |
||
.1.3.6.1.4.1.22610.2.4.2.101 |
||
|
OctetString
|
.1.3.6.1.4.1.22610.2.4.2.101.1 |
|
|
Integer32
|
.1.3.6.1.4.1.22610.2.4.2.101.2 |
|
|
OctetString
|
.1.3.6.1.4.1.22610.2.4.2.101.3 |
|
.1.3.6.1.4.1.22610.2.4.3.12.2 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.1 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.2 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.3 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.5 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.6 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- A10-COMMON-MIBa10
- SNMPv2-TCrfc
- HCNUM-TCrfc
- INET-ADDRESS-MIBrfc
- A10-AX-MIBa10
- A10-AX-NOTIF-OBJa10
- A10-AX-TRAPSa10selected
Notifications / Traps (111)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.22610.2.4.2.100.0.1 |
the syslog messages sent through snmp trap
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.1 |
Notify that the system has started running.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.11 |
The primary hard disk is failed.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.12 |
The secondary hard disk is failed.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.13 |
The hard disk usage is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.14 |
The memory usage is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.15 |
Notify that the agent has been restarted.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.16 |
The AX experiences the packet dropped of axNotificationDroppedPackets.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.17 |
The AX recovers from the packet dropped before.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.18 |
The AX control CPU usage is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.19 |
The AX data CPU usage is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.2 |
Notify that the system is in the process of being shut down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.20 |
The system fan is failed.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.21 |
The system power supply is failed.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.22 |
The system requires the valid license for specific module.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.23 |
The system loads the license for specific module successfully.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.24 |
The module license is expiring or will expire at the giving time.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.25 |
The AX system is mandatorily shut down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.26 |
The file system is becoming the read-only.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.27 |
The system disables the specific licensed module for the past duration seconds.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.28 |
The AX control CPU usage is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.29 |
The AX data CPU usage is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.3 |
The system temperature is high, axNotificationMsg will contain system temperature index if it is not default system temperature.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.30 |
The system temperature is back to normal, axNotificationMsg will contain system temperature index if it is not default system temperature.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.31 |
The hard disk usage is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.32 |
The memory usage is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.33 |
The system fan is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.34 |
The system power supply is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.35 |
The system connection is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.36 |
The system connection is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.37 |
The SMP is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.38 |
The SMP is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.39 |
The AX Tacacs Monitor Server is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.41 |
The high severity issue such as hardware failure.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.42 |
The license module is disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.0.7 |
The system temperature is low, axNotificationMsg will contain system temperature index if it is not default system temperature.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.1 |
The system is going into standby mode.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.10 |
A SLB service has reached the configured connection limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.11 |
A SLB service has reached the configured connection-resume value.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.12 |
A SLB virtual server port is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.13 |
A SLB virtual server port is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.14 |
The AX SLB application buffer usage execeeded the configured threshold.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.15 |
A virtual service port has reached the configured connection limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.16 |
A virtual service port has reached the configured connection rate-limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.17 |
A virtual server has reached the configured connection limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.18 |
A virtual server has reached the configured connection rate-limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.19 |
A SLB server has reached the configured conn-rate-limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.2 |
The system is going into active mode.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.20 |
A SLB service group member has reached the configured conn-rate-limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.21 |
A SLB service group member is enabled to accept the new connection, when the current connections of group members exceed the conn-limit.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.22 |
A SLB service group member is disabled, when the current connections of group members are reduced to the conn-resume.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.23 |
The vrid, axNotificationVrid, in the specific partition becomes the Active state.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.24 |
The vrid, axNotificationVrid, in the specific partition becomes the Standby state.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.25 |
The SSL server certificate error is detected.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.26 |
A SLB server has got a server selection failure.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.27 |
A SLB virtual server is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.28 |
A SLB virtual server is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.29 |
A SLB server is disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.30 |
A SLB service group is Up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.31 |
A SLB service group is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.32 |
A SLB service group member is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.33 |
A SLB service group member is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.34 |
VCS state change notification.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.35 |
A gateway is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.36 |
A gateway is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.37 |
A SLB server has reached the configured bandwidth rate limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.38 |
A SLB server has reached the configured bandwidth-resume value.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.39 |
A SLB service has reached the configured bandwidth rate limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.4 |
A service is detected DOWN.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.40 |
A SLB service has reached the configured bandwidth-resume value.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.5 |
A SLB service is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.6 |
A SLB server is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.7 |
A SLB server is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.8 |
A SLB server has reached the configured connection limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.0.9 |
A SLB server has reached the configured connection-resume value.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.3.0.1 |
The trunk ports threshold trap.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.1 |
The GSLB site is administratively enabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.10 |
The GSLB service IP is administratively disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.11 |
The GSLB service IP is operational up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.12 |
The GSLB service IP is operational down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.13 |
The GSLB service IP port status is changed to up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.14 |
The GSLB service IP port status is changed to down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.15 |
The GSLB zone status is administratively enabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.16 |
The GSLB zone status is administratively disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.17 |
The GSLB zone is operational up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.18 |
The GSLB zone is operational down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.19 |
The GSLB zone service is administratively enabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.2 |
The GSLB site is administratively disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.20 |
The GSLB zone service is administratively disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.21 |
The GSLB zone service is operational up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.22 |
The GSLB zone service is operational down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.23 |
The GSLB group becomes the Master.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.24 |
The GSLB group is removed from the Master.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.25 |
The GSLB group member is joining a group Master.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.26 |
The GSLB group is leaving a group Master.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.3 |
The GSLB site is operational up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.4 |
The GSLB site is operational down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.5 |
The GSLB site SLB device status is changed to up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.6 |
The GSLB site SLB device status is changed to down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.0.9 |
The GSLB service IP is administratively enabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.1 |
Slb virtual server is added or deleted.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.10 |
The slb system level resource indicated by
axNotificationSlbThresholdResourceId is changed from high to normal. |
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.11 |
The slb system level resource indicated by
axNotificationSlbThresholdResourceId is lower than the configured threshold. |
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.12 |
The slb system level resource indicated by
axNotificationSlbThresholdResourceId is changed from low to normal. |
|
|
A10-AX-NOTIF-OBJaxNotificationMsg A10-AX-NOTIF-OBJaxNotificationVirtualServer A10-AX-NOTIF-OBJaxNotificationVirtualServerPort A10-AX-NOTIF-OBJaxNotificationVirtualServerPortType A10-AX-NOTIF-OBJaxNotificationIpAddressType A10-AX-NOTIF-OBJaxNotificationPartitionName A10-AX-NOTIF-OBJaxNotificationSlbObjectChange
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.2 |
Slb virtual server port is addeded or deleted.
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.3 |
Slb server is added or deleted.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.4 |
Slb server port is added or delete.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.5 |
Ssl certification is create or delete.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.6 |
The certification is going to be expired.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.7 |
The partition resource usage becomes above/below the configured limitation.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.0.9 |
The slb system level resource indicated by
axNotificationSlbThresholdResourceId is higher than the configured threshold. |