A10-AX-NOTIFICATIONS
- Source file
A10-AX-NOTIFICATIONS- Last revised
- Not declared
Imported Objects
Objects (11)
Showing 11 of 11 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.22610.2.4.2.100 |
||
.1.3.6.1.4.1.22610.2.4.2.101 |
||
|
OctetString
|
.1.3.6.1.4.1.22610.2.4.2.101.1 |
|
|
Integer32
|
.1.3.6.1.4.1.22610.2.4.2.101.2 |
|
|
OctetString
|
.1.3.6.1.4.1.22610.2.4.2.101.3 |
|
.1.3.6.1.4.1.22610.2.4.3.12.2 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.1 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.2 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.3 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.5 |
||
.1.3.6.1.4.1.22610.2.4.3.12.2.6 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- A10-COMMON-MIBa10
- SNMPv2-TCrfc
- HCNUM-TCrfc
- INET-ADDRESS-MIBrfc
- A10-AX-MIBa10
- A10-AX-NOTIF-OBJa10
- A10-AX-NOTIFICATIONSa10selected
Notifications / Traps (119)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.22610.2.4.2.100.1 |
the syslog messages sent through snmp trap
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.1 |
Notify that the system has started running.
|
|
|
axLowerPowerSupplyFailure
deprecated
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.10 |
The system lower power supply is failed.
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.11 |
The primary hard disk is failed.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.12 |
The secondary hard disk is failed.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.13 |
The hard disk usage is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.14 |
The memory usage is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.15 |
Notify that the agent has been restarted.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.16 |
The AX experiences the packet dropped of axNotificationDroppedPackets.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.17 |
The AX recovers from the packet dropped before.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.18 |
The AX control CPU usage is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.19 |
The AX data CPU usage is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.2 |
Notify that the system is in the process of being shut down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.20 |
The system fan is failed.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.21 |
The system power supply is failed.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.22 |
The system requires the valid license for specific module.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.23 |
The system loads the license for specific module successfully.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.24 |
The license is expiring or will expire at the given time.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.25 |
The AX system is mandatorily shut down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.26 |
The file system is becoming the read-only.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.27 |
The system disables the specific licensed module for the past duration seconds.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.28 |
The AX control CPU usage is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.29 |
The AX data CPU usage is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.3 |
The system temperature is high, axNotificationMsg will contain system temperature index if it is not default system temperature.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.30 |
The system tempature is back to normal, axNotificationMsg will contain the system temperature index if it not default system temperature.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.31 |
The hard disk usage is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.32 |
The memory usage is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.33 |
The system fan is recover.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.34 |
The system power supply is recover.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.35 |
The system connection is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.36 |
The system connection is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.37 |
The system SMP is high.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.38 |
The SMP is back to normal.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.39 |
The AX Tacacs Monitor Server is up/down.
|
|
|
axFan1Failure
deprecated
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.4 |
The system fan1 is failed.
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.41 |
The high severity issue such as hardware failure.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.42 |
The license module is disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.43 |
The number of Sessions has crossed the threshold.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.44 |
The Connections Per Second (CPS) has crossed the threshold.
|
|
|
axFan2Failure
deprecated
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.5 |
The system fan2 is failed.
|
|
axFan3Failure
deprecated
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.6 |
The system fan3 is failed.
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.7 |
The system temperature is low, axNotificationMsg will contain system temperature index if it is not default system temperature.
|
|
|
axUpperPowerSupplyFailure
deprecated
|
.1.3.6.1.4.1.22610.2.4.3.12.2.1.9 |
The system upper power supply is failed.
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.1 |
The system is going into standby mode.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.10 |
A SLB service has reached the configured connection limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.11 |
A SLB service has reached the configured connection-resume value.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.12 |
A SLB virtual server port is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.13 |
A SLB virtual server port is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.14 |
The AX SLB application buffer usage execeeded the configured threshold.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.15 |
A virtual service port has reached the configured connection limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.16 |
A virtual service port has reached the configured connection rate-limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.17 |
A virtual server has reached the configured connection limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.18 |
A virtual server has reached the configured connection rate-limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.19 |
A SLB server has reached the configured conn-rate-limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.2 |
The system is going into active mode.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.20 |
A SLB service group member has reached the configured conn-rate-limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.21 |
A SLB service group member is enabled to accept the new connection, when the current connections of group members exceed the conn-limit.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.22 |
A SLB service group member is disabled, when the current connections of group members are reduced to the conn-resume.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.23 |
The vrid, axNotificationVrid, in the specific partition becomes the Active state.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.24 |
The vrid, axNotificationVrid, in the specific partition becomes the Standby state.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.25 |
The SSL server certificate error is detected.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.26 |
A SLB server has got a server selection failure.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.27 |
Slb virtual server is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.28 |
Slb virtual server is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.29 |
A SLB server is disabled.
|
|
|
axHAActiveActive
deprecated
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.3 |
The system is going into active-active mode.
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.30 |
A SLB service group is Up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.31 |
A SLB service group is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.32 |
A SLB service group member is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.33 |
A SLB service group member is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.34 |
A VCS state change notification.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.35 |
A gateway server is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.36 |
A gateway server is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.37 |
A SLB server has reached the configured bandwidth rate limit.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.38 |
A SLB server has reached the configured bandwidth rate resuming value.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.39 |
A SLB service has reached the configured bandwidth rate limit.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.4 |
A service is detected DOWN.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.40 |
A SLB service has reached the configured bandwidth rate resuming value.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.5 |
A SLB service is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.6 |
A SLB server is down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.7 |
A SLB server is up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.8 |
A SLB server has reached the configured connection limits.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.2.9 |
A SLB server has reached the configured connection-resume value.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.3.1 |
The trunk ports threshold trap.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.1 |
The GSLB site is administratively enabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.10 |
The GSLB service IP is administratively disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.11 |
The GSLB service IP is operational up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.12 |
The GSLB service IP is operational down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.13 |
The GSLB service IP port status is changed to up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.14 |
The GSLB service IP port status is changed to down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.15 |
The GSLB zone status is administratively enabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.16 |
The GSLB zone status is administratively disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.17 |
The GSLB zone is operational up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.18 |
The GSLB zone is operational down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.19 |
The GSLB zone service is administratively enabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.2 |
The GSLB site is administratively disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.20 |
The GSLB zone service is administratively disabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.21 |
The GSLB zone service is operational up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.22 |
The GSLB zone service is operational down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.23 |
The GSLB group becomes the Master.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.24 |
The GSLB group is removed from the Master.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.25 |
The GSLB group member is joining a group.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.26 |
The GSLB group member is leaving a group.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.3 |
The GSLB site is operational up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.4 |
The GSLB site is operational down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.5 |
The GSLB site SLB device status is changed to up.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.6 |
The GSLB site SLB device status is changed to down.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.5.9 |
The GSLB service IP is administratively enabled.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.1 |
Slb virtual server is added or deleted.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.10 |
The slb system level resource indicated by
axNotificationSlbThresholdResourceId is changed from high to normal. |
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.11 |
The slb system level resource indicated by
axNotificationSlbThresholdResourceId is lower than the configured threshold. |
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.12 |
The slb system level resource indicated by
axNotificationSlbThresholdResourceId is changed from low to normal. |
|
|
A10-AX-NOTIF-OBJaxNotificationMsg A10-AX-NOTIF-OBJaxNotificationVirtualServer A10-AX-NOTIF-OBJaxNotificationVirtualServerPort A10-AX-NOTIF-OBJaxNotificationVirtualServerPortType A10-AX-NOTIF-OBJaxNotificationIpAddressType A10-AX-NOTIF-OBJaxNotificationPartitionName A10-AX-NOTIF-OBJaxNotificationSlbObjectChange
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.2 |
Slb virtual server port is addeded or deleted.
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.3 |
Slb server is added or deleted.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.4 |
Slb server port is added or delete.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.5 |
Ssl certification is create or delete.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.6 |
The certification is going to be expired.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.7 |
The partition resource usage becomes above/below the configured limitation.
|
|
.1.3.6.1.4.1.22610.2.4.3.12.2.6.9 |
The slb system level resource indicated by
axNotificationSlbThresholdResourceId is higher than the configured threshold. |